EN ISO 23900-3:2018

Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling (ISO 23900-3:2015)

ISO 23900-3:2015 specifies a method of determining in polyethylene (PE) the colouristic properties of a test pigment relative to a standard, and the ease of dispersion DHPE of pigments from the differences in colour strength on dispersing colouring materials under various conditions.
Method A is appropriate for use with organic powder pigments and carbon black pigments in powder form, many of which are subject to compaction (reagglomeration under pressure), for inorganic pigments in powder form and for pigment preparations in powder or flake form.
Method B is appropriate for testing pigments and pigment preparations in granular form and for inorganic pigments in any form.

Pigmente und Füllstoffe - Dispergierverfahren und Beurteilung der Dispergierbarkeit in Kunststoffen - Teil 3: Bestimmung der koloristischen Eigenschaften und der Dispergierhärte von Schwarz- und Buntpigmenten in Polyethylen im Walztest (ISO 23900-3:2015)

Pigments et matières de charge - Méthodes de dispersion et évaluation de l'aptitude à la dispersion dans les plastiques - Partie 3: Détermination des propriétés colorimétriques et de la facilité de dispersion des pigments noirs et colorés dans le polyéthylène par calandrage sur bicylindre (ISO 23900-3:2015)

ISO 23900-3:2015 spécifie une méthode permettant de déterminer dans le polyéthylène (PE) les propriétés colorimétriques d'un pigment d'essai par rapport à un étalon, ainsi que la facilité de dispersion DHPE des pigments à partir des différences d'intensité de couleur lorsque des matières colorantes sont dispersées dans différentes conditions.
La méthode A convient pour les pigments organiques en poudre et pour les pigments au noir de carbone sous forme de poudre, qui sont, dans un grand nombre de cas, sujets au compactage (réagglomération sous pression); elle peut également être utilisée avec les pigments inorganiques en poudre et avec les préparations de pigments, en poudre ou sous forme de flocons.
La méthode B est appropriée aux essais de pigments et de préparations de pigments sous forme granulaire ainsi qu'aux essais de pigments inorganiques quelle que soit leur forme.
La facilité de dispersion déterminée de cette manière n'est valable que pour l'équipement, les conditions et le milieu de dispersion utilisés. La mise en ?uvre de conditions d'essai différentes de celles spécifiées peut conduire à des résultats différents; cela vaut pour la valeur absolue et pour le rapport entre les valeurs obtenues pour la facilité de dispersion des divers pigments. L'indice DHPE est donc utilisé pour désigner la valeur obtenue comme spécifié dans la présente partie de l'ISO 23900.

Pigmenti in polnila - Metode dispergiranja in ocenjevanje disperzibilnosti v polimernih materialih - 3. del: Določevanje barvnih lastnosti in dispergiranja črnih in barvnih pigmentov v polietilenu z valjanjem z dvema valjčkoma (ISO 23900-3:2015)

ISO 23900-3:2015 določa postopek za določanje barvnih značilnosti preskusnega pigmenta v polietilenu (PE) glede na standard in dispergiranje pigmentov DHPE na podlagi razlik v intenzivnosti barve pri dispergiranju barvnih materialov v različnih pogojih.
Metoda A je primerna za uporabo z organskim pigmentnim prahom in črnimi ogljikovimi pigmenti v obliki prahu, od tega se na mnogih opravi zgoščevanje (vnovična aglomeracija pod tlakom), za uporabo z anorganskimi pigmenti v prahu in za pripravo pigmentov v obliki prahu ali kosmičev.
Metoda B je primerna za preskušanje pigmentov in pripravo pigmentov v granularni obliki in za anorganske pigmente v kateri koli obliki.

General Information

• Status: Published
• Publication Date: 09-Jan-2018
• Withdrawal Date: 30-Jul-2018
• ICS: 87.060.10 - Pigments and extenders
• Technical Committee: CEN/TC 298 - Pigments and extenders
• Drafting Committee: CEN/TC 298 - Pigments and extenders
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 10-Jan-2018
• Due Date: 15-Aug-2019
• Completion Date: 10-Jan-2018
• Ref Project: SIST EN ISO 23900-3:2018 - Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling (ISO 23900-3:2015)

Relations

• Replaces: EN 13900-3:2003 - Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling
• Effective Date: 17-Jan-2018

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2018
1DGRPHãþD
SIST EN 13900-3:2003
3LJPHQWLLQSROQLOD0HWRGHGLVSHUJLUDQMDLQRFHQMHYDQMHGLVSHU]LELOQRVWLY
SROLPHUQLKPDWHULDOLKGHO'RORþHYDQMHEDUYQLKODVWQRVWLLQGLVSHUJLUDQMDþUQLK
LQEDUYQLKSLJPHQWRYYSROLHWLOHQX]YDOMDQMHP]GYHPDYDOMþNRPD,62

Pigments and extenders - Methods of dispersion and assessment of dispersibility in
plastics - Part 3: Determination of colouristic properties and ease of dispersion of black
and colour pigments in polyethylene by two-roll milling (ISO 23900-3:2015)
Pigmente und Füllstoffe - Dispergierverfahren und Beurteilung der Dispergierbarkeit in
Kunststoffen: Teil 3: Bestimmung der koloristischen Eigenschaften und der
Dispergierhärte von Schwarz- und Buntpigmenten in Polylethylen im Walztest (ISO
23900-3:2015)
Pigments et matières de charge - Méthodes de dispersion et évaluation de l'aptitude à la
dispersion dans les plastiques - Partie 3: Détermination des propriétés colorimétriques et
de la facilité de dispersion des pigments noirs et colorés dans le polyéthylène par
calandrage sur bicylindre (ISO 23900-3:2015)
Ta slovenski standard je istoveten z: EN ISO 23900-3:2018
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
87.060.10 Pigmenti in polnila Pigments and extenders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 23900-3
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2018
EUROPÄISCHE NORM
ICS 87.060.10 Supersedes EN 13900-3:2003
English Version
Pigments and extenders - Methods of dispersion and
assessment of dispersibility in plastics - Part 3:
Determination of colouristic properties and ease of
dispersion of black and colour pigments in polyethylene by
two-roll milling (ISO 23900-3:2015)
Pigments et matières de charge - Méthodes de Pigmente und Füllstoffe - Dispergierverfahren und
dispersion et évaluation de l'aptitude à la dispersion Beurteilung der Dispergierbarkeit in Kunststoffen: Teil
dans les plastiques - Partie 3: Détermination des 3: Bestimmung der koloristischen Eigenschaften und
propriétés colorimétriques et de la facilité de der Dispergierhärte von Schwarz- und Buntpigmenten
dispersion des pigments noirs et colorés dans le in Polylethylen im Walztest (ISO 23900-3:2015)
polyéthylène par calandrage sur bicylindre (ISO
23900-3:2015)
This European Standard was approved by CEN on 4 January 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 23900-3:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
The text of ISO 23900-3:2015 has been prepared by Technical Committee ISO/TC 256 “Pigments,
dyestuffs and extenders” of the International Organization for Standardization (ISO) and has been taken
over as EN ISO 23900-3:2018 by Technical Committee CEN/TC 298 “Pigments and extenders” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2018, and conflicting national standards shall be
withdrawn at the latest by July 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13900-3:2003.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 23900-3:2015 has been approved by CEN as EN ISO 23900-3:2018 without any
modification.
INTERNATIONAL ISO
STANDARD 23900-3
First edition
2015-05-01
Pigments and extenders — Methods
of dispersion and assessment of
dispersibility in plastics —
Part 3:
Determination of colouristic
properties and ease of dispersion
of black and colour pigments in
polyethylene by two-roll milling
Pigments et matières de charge — Méthodes de dispersion et
évaluation de l’aptitude à la dispersion dans les plastiques —
Partie 3: Détermination des propriétés colorimétriques et de la facilité
de dispersion des pigments noirs et colorés dans le polyéthylène par
calandrage sur bicylindre
Reference number
ISO 23900-3:2015(E)
©
ISO 2015
ISO 23900-3:2015(E)
© ISO 2015
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2015 – All rights reserved

ISO 23900-3:2015(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Materials . 2
5.1 Materials for method A . 2
5.1.1 Test medium . 2
5.1.2 Titanium dioxide pigment . 2
5.2 Materials for method B . 2
5.2.1 Test medium . 2
5.2.2 Titanium dioxide pigment . 2
6 Apparatus . 2
7 Sampling . 3
8 Procedure. 3
8.1 Testing of colouristic properties in white reduction . 3
8.1.1 Preparation of the mixtures . 3
8.1.2 Two-roll milling . 3
8.1.3 Pressing . 4
8.1.4 Photometric measurement . 4
8.2 Testing of ease of dispersion . 4
8.2.1 Preparation of the test samples . 4
8.2.2 Pressing and photometric measurement . 4
9 Evaluation . 4
10 Test report . 5
11 Precision . 5
Bibliography . 6
ISO 23900-3:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO
...