EN ISO 13254:2017
(Main)Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010)
Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010)
ISO 13254:2010 specifies a test method for watertightness of thermoplastics products fabricated from more than one piece for non-pressure applications, and joints of thermoplastics piping systems for non-pressure applications.
Rohrleitungssysteme aus Thermoplasten für drucklose Anwendungen - Prüfverfahren auf Wasserdichtheit (ISO 13254:2010)
Diese Internationale Norm legt ein Prüfverfahren für die Wasserdichtheit von aus mehreren Teilen bestehenden handgefertigten Produkten aus Thermoplasten für drucklose Anwendungen sowie für Ver-bindungen in Rohrleitungssystemen aus Thermoplasten für drucklose Anwendungen fest.
Systèmes de canalisations thermoplastiques pour applications sans pression - Méthode d'essai de l'étanchéité à l'eau (ISO 13254:2010)
L'ISO 13254:2010 spécifie une méthode d'essai concernant l'étanchéité à l'eau des produits thermoplastiques façonnés à partir de plus d'une pièce, pour des applications sans pression et des assemblages des systèmes de canalisations thermoplastiques pour des applications sans pression.
Plastomerni cevni sistemi, ki delujejo po težnostnem principu - Metoda za preskus vodotesnosti (ISO 13254:2010)
Standard ISO 13254:2010 določa preskusno metodo za vodotesnost plastomernih izdelkov, ki so izdelani iz več kot enega kosa in delujejo po težnostnem principu, ter spojev plastomernih cevnih sistemov, ki delujejo po težnostnem principu.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2018
1DGRPHãþD
SIST EN 1053:1997
Plastomerni cevni sistemi, ki delujejo po težnostnem principu - Metoda za preskus
vodotesnosti (ISO 13254:2010)
Thermoplastics piping systems for non-pressure applications - Test method for
watertightness (ISO 13254:2010)
Rohrleitungssysteme aus Thermoplasten für drucklose Anwendungen - Prüfverfahren
auf die Wasserdichtheit (ISO 13254:2010)
Systèmes de canalisations thermoplastiques pour applications sans pression - Méthode
d'essai de l'étanchéité à l'eau (ISO 13254:2010)
Ta slovenski standard je istoveten z: EN ISO 13254:2017
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 13254
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2017
EUROPÄISCHE NORM
ICS 23.040.20; 91.140.80 Supersedes EN 1053:1995
English Version
Thermoplastics piping systems for non-pressure
applications - Test method for watertightness (ISO
13254:2010)
Systèmes de canalisations thermoplastiques pour Rohrleitungssysteme aus Thermoplasten für drucklose
applications sans pression - Méthode d'essai de Anwendungen - Prüfverfahren auf die Wasserdichtheit
l'étanchéité à l'eau (ISO 13254:2010) (ISO 13254:2010)
This European Standard was approved by CEN on 19 September 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13254:2017 E
worldwide for CEN national Members.
Contents Page
European Foreword . 3
European Foreword
The text of ISO 13254:2010 has been prepared by Technical Committee ISO/TC 138 “Plastics pipes,
fittings and valves for the transport of fluids” of the International Organization for Standardization
(ISO) and has been taken over as EN ISO 13254:2017 by Technical Committee CEN/TC 155 “Plastics
piping systems and ducting systems” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2018 and conflicting national standards shall be
withdrawn at the latest by October 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1053:1995.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
the United Kingdom.
Endorsement notice
The text of ISO 13254:2010 has been approved by CEN as a EN ISO 13254:2017 without any
modification.
INTERNATIONAL ISO
STANDARD 13254
First edition
2010-05-01
Thermoplastics piping systems for non-
pressure applications — Test method for
watertightness
Systèmes de canalisations thermoplastiques pour applications sans
pression — Méthode d'essai de l'étanchéité à l'eau
Reference number
ISO 13254:2010(E)
©
ISO 2010
ISO 13254:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved
ISO 13254:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.