EN 3042:1991
(Main)Aerospace series - Quality assurance - EN aerospace products - Qualification procedure
Aerospace series - Quality assurance - EN aerospace products - Qualification procedure
This standard prescribes the qualification procedure for EN aerospace products. It is applicable in conjunction with EN 2000 whenever it is referenced in the EN standards.
Luft- und Raumfahrt - Qualitätssicherung - EN-Erzeugnisse der Luft- und Raumfahrt - Qualifikationsverfahren
Diese Norm legt das Qualifikationsverfahren fu"r EN-Erzeugnisse der Luft- und Raumfahrt fest. Sie ist in Zusammenhang mit EN 2000 anzuwenden, wenn in den EN-Normen auf sie Bezug genommen wird.
Série aérospatiale - Assurance qualité - Produits aérospatiaux EN - Procédure de qualification
La présente norme prescrit la procédure de qualification des produits aérospatiaux EN. Elle s'applique conjointement avec la norme EN 2000, chaque fois qu'elle est référencée dans les normes EN.
Aerospace series - Quality assurance - EN aerospace products - Qualification procedure
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Quality assurance - EN aerospace products - Qualification procedureLuft- und Raumfahrt - Qualitätssicherung - EN-Erzeugnisse der Luft- und Raumfahrt - QualifikationsverfahrenSérie aérospatiale - Assurance qualité - Produits aérospatiaux EN - Procédure de qualificationAerospace series - Quality assurance - EN aerospace products - Qualifica
...
This May Also Interest You
1.1 Application
This standard defines the common nonconformity data definition and documentation that shall be exchanged between an internal/external supplier or sub-tier supplier, and the customer when informing about a nonconformity requiring formal decision. The requirements are applicable, partly or totally, when reporting a product nonconformity to the owner or operator, as user of the end item (e.g., engine, aircraft, spacecraft, helicopter), if specified by contract.
Reporting of nonconformity data, either electronically or conventionally on paper, is subject to the terms and conditions of the contract. This also includes, where applicable, data access under export control regulations.
1.2 Purpose
The process of exchanging, coordinating, and approving nonconformity data via concession or product quality escape varies with the multiple relationships and agreements among all parties concerned. The information provided by this standard forms architecture for submitting and managing data that allows for concise and accurate communication using various documented methods. The main objective of this standard is to provide the definition of a data set that can be integrated into any form of communication (e.g., electronic data interchange, submission of conventional paper forms).
- Standard19 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft19 pagesEnglish languagesale 10% offe-Library read for×1 day
The requirements of EN 9100 apply with the following clarification for software.
This European standard supplements the EN 9100 standard requirements for deliverable software and
contains quality management system requirements for organizations that design, develop, and/or
produce deliverable software and services for the aviation, space, and defence industry. This includes,
as required, support software that is used in the development and maintenance of deliverable software
and services. The deliverable software may be stand-alone, embedded, mobile application, or loadable
into a target computer
This deliverable software may also be part of services (e.g., cloud environment, web hosted solutions or
platforms).
Where the use of Hardware Description Language (HDL) or high order language is utilized as the design
source of electronic hardware [e.g., Application Specific Integrated Circuit (ASIC), Programmable Logic
Device (PLD)]; the organization and customer, and/or supplier shall agree on the extent of applicability
of this supplement.
NOTE For airborne electronic hardware guidance, see RTCA/DO-254 or EUROCAE ED-80. For operations
requirements, see EN 9100, clause 8.
Where Commercial-Off-The-Shelf (COTS) or non-developmental software is integrated into a
deliverable product, the organization and customer shall agree on the extent of applicability of this
supplement.
For the purposes of this document, the terms “product” and “software product” are considered
synonymous.
For the purposes of this document, the term “services” may be considered a product.
- Standard27 pagesEnglish languagesale 10% offe-Library read for×1 day
1.1 General
This document defines a system for the qualification of standard products for aviation, space, and defenc applications. It defines the principles that shall be adhered to when carrying out product qualification; applied in conjunction with the rules and procedures of the CA. The system enables the CA to confirm compliance is achieved and maintained, in accordance with the requirements of its product definition and associated controlling technical specifications by an Original Component Manufacturer (OCM) of standard products.
This document requires an OCM that has been granted product qualification approval to ensure applicable approvals are maintained and renewed in accordance with the CA’s quality system for that qualified product.
OCMs and OCM designated Value Added Distributors (VADs) requesting product qualification to this standard, shall as a prerequisite, maintain EN 9100 standard quality management system certification approval. This certification shall be visible in the Online Aerospace Supplier Information System (OASIS) database.
1.2 Application
The application of this document will be mandated either in the product standard or its controlling technical specifications. When invoked, the OCM wanting to produce aerospace standard products will need to gain qualification approval from an aerospace CA. The processes defined herein will be performed impartially for the benefit of the aerospace industry, by the CA, to ensure continued compliance of standard products to the requirements defined in their controlling technical specifications.
OCMs will need to ensure they allow sufficient lead-time to complete this process to gain product approval from the CA to support/satisfy their customer delivery requirements. Qualified products using this process shall not be supplied or used without qualification approval and a valid Product Qualification Certificate (PQC) being granted.
- Standard29 pagesEnglish languagesale 10% offe-Library read for×1 day
This document includes EN ISO 9001:2015 quality management system requirements and specifies additional aviation, space and defence industry requirements, definitions and notes.
It is emphasized that the requirements specified in this document are complementary (not alternative) to customer and applicable statutory and regulatory requirements.
If there is a conflict between the requirements of this document and customer or applicable statutory or regulatory requirements, the latter shall take precedence.
This International Standard specifies requirements for a quality management system when an organization:
a) needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements; and
b) aims to enhance customer satisfaction through the effective application of the system, including processes for improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements.
All the requirements of this International Standard are generic and are intended to be applicable to any organization, regardless of its type or size or the products and services it provides.
NOTE 1 In this International Standard, the terms "product" or "service" only apply to products and services intended for or required by, a customer.
NOTE 2 Statutory and regulatory requirements can be expressed as legal requirements.
- Standard59 pagesEnglish languagesale 10% offe-Library read for×1 day
1.1 General
This document defines requirements for the preparation and execution of the audit process. In addition, it defines the content and composition for the audit reporting of conformity and process effectiveness to the EN 9100-series standards, the organization's QMS documentation, and customer and statutory/regulatory requirements.
The requirements in this document are additions or represent changes to the requirements and guidelines in the standards for conformity assessment, auditing, and certification as published by ISO/IEC (i. e., EN ISO/IEC 17000, EN ISO/IEC 17021-1). When there is conflict with these standards, the requirements of the EN 9101 standard shall take precedence.
NOTE 1 In this standard, the term "EN 9100-series standards" comprises the following Aerospace Quality Management System (AQMS) standards: EN 9100, EN 9110, and EN 9120; developed by the IAQG and published by various national standards bodies.
NOTE 2 In addition to this standard, the IAQG publishes deployment support material on the IAQG website (see http://www.sae.org/iaqg/) that can be used by audit teams, when executing the audit process.
1.2 Application
This document shall be used for audits of EN 9100-series standards by CBs for certification of organizations, under the auspices of the aviation, space, and defence industry certification scheme [also known as the Industry Controlled Other Party (ICOP) scheme]. The ICOP scheme requirements are defined in the EN 9104-series standards (i. e., EN 9104-001, EN 9104-002, EN 9104-003).
NOTE Relevant parts of this standard can also be used by an organization in support of internal audits (1st party) and external audits at suppliers (2nd party).
- Standard30 pagesEnglish languagesale 10% offe-Library read for×1 day
This document includes EN ISO 9001:2015 quality management system requirements and specifies additional civil and military aviation maintenance and continuing airworthiness industry requirements, definitions and notes.
It is emphasized that the requirements specified in this document are complementary (not alternative) to customer and applicable statutory and regulatory requirements.
If there is a conflict between the requirements of this document and customer or applicable statutory or regulatory requirements, the latter shall take precedence.
This International Standard specifies requirements for a quality management system when an organization:
a) needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements; and
b) aims to enhance customer satisfaction through the effective application of the system, including processes for improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements.
All the requirements of this International Standard are generic and are intended to be applicable to any organization, regardless of its type or size or the products and services it provides.
NOTE 1 In this International Standard, the terms "product" or "service" only apply to products and services intended for or required by, a customer.
NOTE 2 Statutory and regulatory requirements can be expressed as legal requirements.
- Standard59 pagesEnglish languagesale 10% offe-Library read for×1 day
This document includes EN ISO 9001:20152 quality management system requirements and
specifies additional aviation, space and defence industry requirements, definitions and notes.
It is emphasized that the requirements specified in this document are complementary
(not alternative) to customer and applicable statutory and regulatory requirements.
If there is a conflict between the requirements of this document and customer or applicable
statutory or regulatory requirements, the latter shall take precedence.
This International Standard specifies requirements for a quality management system when an
organization:
a) needs to demonstrate its ability to consistently provide products and services that meet customer
and applicable statutory and regulatory requirements and
b) aims to enhance customer satisfaction through the effective application of the system, including
processes for improvement of the system and the assurance of conformity to customer and
applicable statutory and regulatory requirements.
All the requirements of this International Standard are generic and are intended to be applicable to any
organization, regardless of its type or size, or the products and services it provides.
NOTE 1 In this International Standard, the terms “product” or “service” only apply to products and services
intended for, or required by, a customer.
NOTE 2 Statutory and regulatory requirements can be expressed as legal requirements.
- Standard58 pagesEnglish languagesale 10% offe-Library read for×1 day
- Standard64 pagesGerman languagesale 10% offe-Library read for×1 day
This standard defines uniform quality and technical requirements relative to metallic parts marking performed using “data matrix symbology” within the aviation, space, and defence industry. ISO/IEC 16022 specifies general requirements (e. g., data character encodation, error correction rules, decoding algorithm). In addition to ISO/IEC 16022 specification, part identification with such symbology is subject to the requirements in this standard to ensure electronic reading of the symbol.
The marking processes covered by this standard are as follows:
Dot Peening;
Laser;
Electro-Chemical Etching.
Further marking processes will be included, if required.
Unless specified otherwise in the contractual business relationship, the company responsible for the design of the part shall determine the location of the data matrix marking. Symbol position should allow optimum illumination from all sides for readability.
This standard does not specify information to be encoded.
- Standard33 pagesEnglish languagesale 10% offe-Library read for×1 day
Die in diesem Dokument festgelegten Anforderungen gelten für die IAQG und zugehörige Sektoren, die die Überwachung festgelegter Anforderungen nach der Normenreihe EN 9104 (d. h. EN 9104 001, EN 9104 002, EN 9104 003) steuern. Die Anforderungen gelten für IAQG-Arbeitsgruppen für die Überwachung/Kontrolle.
ANMERKUNG Alle erforderlichen Formulare sind in Anhang A abgebildet. Diese Beispiel-Formulare werden zu Referenzzwecken dargestellt; die aktuellen Versionen dieser Formulare stehen auf der IAQG-Webseite zur Verfügung.
- Standard93 pagesEnglish languagesale 10% offe-Library read for×1 day
1.1 General
This European Standard establishes the baseline requirements for performing and documenting FAI. Should there be a conflict between the requirements of this European Standard and applicable statutory or regulatory requirements, the applicable statutory or regulatory requirements shall take precedence.
1.2 Purpose
The primary purpose of FAI is to validate that product realization processes are capable of producing parts and assemblies that meet engineering and design requirements. A well-planned and executed FAI will provide objective evidence the manufacturer’s processes can produce compliant product and that they have understood and incorporated associated requirements. FAI will:
• Provide confidence that the product realization processes are capable of producing conforming product.
• Demonstrate that the manufacturers and processors of the product have an understanding of the associated requirements.
• Provide objective evidence of process capability.
• Reduce potential risks associated with production start-up and/or process changes.
• Provide assurance of product conformance at the start of production and after changes outlined in this European Standard.
An FAI is intended to:
• Reduce future escapes, risks, and total costs.
• Help ensure safety of flight.
• Improve quality, delivery, and customer satisfaction.
• Reduce costs and production delays associated with product nonconformances.
• Identify product realization processes that are not capable of producing conforming product, and initiate and/or validate corrective actions.
1.3 Application
This European Standard applies to organizations that are responsible for producing the design characteristics of the product (i.e., product realization). The organization shall flow down the requirements of this European Standard to suppliers or processors who produce design characteristics.
This European Standard applies to assemblies, sub-assemblies, and detail parts including castings, forgings, and modifications to standard catalogue or Commercial-Off-the-Shelf (COTS) items.
Unless contractually required, this European Standard does not apply to:
• Development and prototype parts that are not considered as part of the first production run.
• Unique single run production orders, not intended for ongoing production (e.g., out-of-production spares).
• Procured standard catalogue items, COTS, or deliverable software.
- Standard26 pagesEnglish languagesale 10% offe-Library read for×1 day
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.