Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining

This European Standard applies to mechanical continuous handling equipment used in opencast lignite mines and the particular mechanical continuous handling equipment used:
-   to convey lignite or overburden from opencast mines;
-   to convey residuals and tailings from lignite processing to opencast mines;
-   to convey lignite, overburden or lignite treatment processing residuals and tailings from one opencast mine to another.
This standard applies to continuous handling equipment operating in delimited site areas that are off-limits to the public and accessible only to authorized persons.
It specifies the safety requirements for stationary, mobile and shiftable continuous handling equipment designed to transport bulk goods by continuous movement from a loading point to a discharge point.
The standard considers the significant hazards that arise during the use, movement and shifting of continuous handling equipment, as well as the measures for eliminating or reducing these hazards provided the continuous handling equipment is used as intended and the remaining risk is foreseen and taken into account by the manufacturer. A complete list of all the hazards specified in EN 1050 is given in Annex A (normative).
The requirements of this standard do not apply to equipment and systems manufactured and put into operation before the publication date of this standard.
This standard does not cover:
a)   safety requirements of wireless remote control systems;
b)   hazards generated by noise;
c)   hazards generated by vibration;
d)   hazards generated by explosion;
e)   hazards generated by electromagnetic interference (EMC).
NOTE   Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres and Directive 89/336/EEC.relating to electromagnetic compatibility may be applicable to equipment or components covered by this European Standard.

Stetigförderer und Systeme - Allgemeine Sicherheits-Anforderungen an Stetigförderer im Braunkohlentagebau

Diese Europäische Norm gilt für mechanische Stetigförderer in Braunkohlentagebauen und diejenigen
mechanischen Stetigförderer:
⎯ mit denen Braunkohle oder Abraum aus dem Tagebau herausgefördert werden oder
⎯ mit denen die Reststoffe der Braunkohlenverarbeitung in den Tagebau zurück gefördert werden,
⎯ mit denen Braunkohle, Abraum oder Reststoffe der Braunkohleverarbeitung von einem Tagebau in einen
anderen Tagebau gefördert werden.
Diese Norm gilt für Stetigförderer, die in einem abgegrenzten Betriebsgelände, das der Öffentlichkeit nicht
zugänglich ist, betrieben werden und nur für befugte Personen zugänglich ist.
Sie legt Anforderungen an die Sicherheit für ortsfeste, fahrbare und rückbare Stetigförderer fest, die für den
Transport von Schüttgütern durch stetige Bewegung von einer Aufgabestelle zu einer Abwurfstelle
vorgesehen sind.
Die Norm behandelt die signifikanten Gefährdungen, die bei der Anwendung sowie beim Fahren und Rücken
von Stetigförderern entstehen, und Maßnahmen zur Beseitigung dieser Gefährdungen oder ihrer
Verminderung, sofern die Stetigförderer bestimmungsgemäß eingesetzt werden und die verbleibende
Restgefahr vom Hersteller vorhergesehen und in Kauf genommen wurde. Eine vollständige Liste aller
Gefährdungen nach EN 1050 ist im Anhang A (normativ) wiedergegeben.
Die Anforderungen dieser Norm gelten nicht für Einrichtungen und Systeme, die vor dem Erscheinungsdatum
dieser Norm hergestellt und in Verkehr gebracht wurden.
In dieser Norm sind nicht behandelt:
a) Sicherheitsanforderungen an kabellose Fernsteuerungen;
b) Gefährdungen durch Lärm;
c) Gefährdungen durch Vibration;
d) Gefährdungen durch Explosion;
e) Gefährdungen durch elektromagnetische Störungen (EMV).
(...)

Équipements et systèmes de manutention continue - Prescriptions générales de sécurité applicables aux équipements de manutention continue utilisés dans les mines de lignite à ciel ouvert

La présente norme européenne s'applique aux équipements mécaniques de manutention continue utilisés dans les mines de lignite à ciel ouvert et aux équipements mécaniques de manutention continue permettant :
—   d’extraire le lignite ou les morts-terrains à ciel ouvert ou
—   de ramener les résidus du traitement du lignite dans la mine,
—   de transporter le lignite, les déblais ou les résidus du traitement du lignite d’une mine dans une autre.
La présente norme s'applique aux équipements de manutention continue utilisés sur un site délimité et inaccessible au grand public et dont l’accès est réservé aux personnes autorisées.
Elle définit les prescriptions relatives à la sécurité pour les équipements de manutention continue fixes, mobiles et déplaçables, prévus pour le transport de produits en vrac par manutention continue entre un point de chargement et un point de déchargement.
La présente norme traite des phénomènes dangereux significatifs encourus lors de l'utilisation et du déplacement des équipements de manutention continue ainsi que des mesures permettant d'éliminer ou de réduire ces risques, à condition que les équipements mécaniques de manutention continue aient été utilisés comme prévu et que le constructeur ait prévu et pris en compte le risque résiduel. L'Annexe A (normative) donne une liste complète de tous les phénomènes dangereux conformément à l’EN 1050.
Les prescriptions de la présente norme ne s’appliquent pas aux équipements et systèmes fabriqués et mis sur le marché avant la date de publication de la présente norme.
La présente norme ne traite pas :
a)   des prescriptions de sécurité relatives aux télécommandes sans fil ;
b)   des risques dus aux bruits ;
c)   des risques dus aux vibrations ;
d)   des risques dus aux explosions ;
e)   des risques dus aux interférences électromagnétiques (CEM).
(...)

Naprave in sistemi za kontinuirni transport - Splošne varnostne zahteve za kontinuirne transporterje pri dnevnih kopih rjavega premoga in lignita

Ta evropski standard se uporablja za strojne naprave za kontinuirni transport, ki se uporabljajo pri dnevnih kopih rjavega premoga in lignita in posebne naprave za kontinuirni transport, ki se uporabljajo: za pošiljanje lignita ali krovne plasti iz dnevnih kopov rudnikov; za pošiljanje ostankov in jalovine iz predelave lignita v dnevne kope rudnikov; za pošiljanje lignita, krovne plasti ali jalovine in ostankov postopka obdelave lignita iz enega dnevnega kopa rudnika v drugega. Ta standard se uporablja za naprave za kontinuirni transport, ki obratujejo v razmejenih področjih, kjer je javnosti dostop prepovedan in so dostopna samo pooblaščenim osebam. Določa varnostne zahteve za nepremične, premične in premestljive naprave za kontinuirni transport, ki so zasnovane za transport razsutega tovora s kontinuirnim gibanjem od točke nakladanja do točke raztovora. Standard upošteva velike nevarnosti, do katerih pride med uporabo, gibanjem in premeščanjem naprav za kontinuirni transport, kot tudi ukrepe za preprečevanje ali zmanjševanje teh nevarnosti, pod pogojem da se naprave za kontinuirni transport uporabljajo v skladu z namembnostjo in je proizvajalec predvidel in upošteval preostalo tveganje. Popoln spisek vseh nevarnosti, opredeljenih v EN 1050, je podan v Dodatku A (normativni). Zahteve tega standarda se ne uporabljajo za opremo in sisteme, ki so proizvedeni in dani v obratovanje pred datumom objave tega standarda. Ta standard ne zajema: a) varnostnih zahtev za brezžične sisteme daljinskega upravljanja; b) nevarnosti, ki jih povzroči hrup; c) nevarnosti, ki jih povzročijo tresljaji; d) nevarnosti, ki jih povzroči eksplozija; e) nevarnosti, ki jih povzročijo elektromagnetne motnje (EMC).

General Information

Status
Published
Publication Date
16-Feb-2010
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
10-Jun-2021

Relations

Buy Standard

Standard
EN 14658:2005+A1:2010
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Naprave in sistemi za kontinuirni transport - Splošne varnostne zahteve za kontinuirne transporterje pri dnevnih kopih rjavega premoga in lignitaStetigförderer und Systeme - Allgemeine Sicherheits-Anforderungen an Stetigförderer im BraunkohlentagebauEquipements et systèmes de manutention continue - Prescriptions générales de sécurité aux équipements de manutention continue utilisés dans les mines de lignite à ciel ouvertContinuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining53.040.10TransporterjiConveyorsICS:Ta slovenski standard je istoveten z:EN 14658:2005+A1:2010SIST EN 14658:2005+A1:2010en,fr,de01-april-2010SIST EN 14658:2005+A1:2010SLOVENSKI
STANDARD



SIST EN 14658:2005+A1:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14658:2005+A1
February 2010 ICS 53.040.10 Supersedes EN 14658:2005English Version
Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining
Equipements et systèmes de manutention continue - Prescriptions générales de sécurité aux équipements de manutention continue utilisés dans les mines de lignite à ciel ouvert
Stetigförderer und Systeme - Allgemeine Sicherheits-Anforderungen an Stetigförderer im Braunkohlentagebau This European Standard was approved by CEN on 25 March 2005 and includes Amendment 1 approved by CEN on 11 January 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14658:2005+A1:2010: ESIST EN 14658:2005+A1:2010



EN 14658:2005+A1:2010 (E) 2 Contents Page Foreword .4Introduction .51Scope .62Normative references .63Terms and definitions .74List of significant hazards .94.1General .94.2Mechanical hazards .94.2.1Crushing and shearing .94.2.2Entanglement, drawing-in and trapping .94.2.3Stability .94.2.4Hazards generated by fracturing and rupturing during operation . 104.2.5Hazards generated by slipping, tripping and falling . 104.3Electrical equipment hazards .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.