Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers

This European Standard deals with the technical requirements to minimise the hazards listed in clause 4 and annex A. These hazards can arise during the operation and maintenance of equipment to store bulk materials in silos, bunkers, bins and hoppers and their built-in inlet and outlet devices when carried out in accordance with the specifications given by the manufacturer or his authorised representative. This standard deals with safety related technical verification during commissioning.
The following parts are dealt with in this standard (see Figure 1):
NOTE   Silos are made of different materials e.g. concrete, steel, aluminium, spun rayon, wood.
Safety requirements and/or measures in this standard apply to equipment used in all environments. However, additional risk assessment and safety measures need to be considered in severe conditions, e.g. low or high temperatures out of the range covered by EN 60204-1, corrosive environments, strong magnetic fields, radioactive conditions and bulk materials to be stored included their flow the nature of which could lead to a dangerous situation.
This standard does not cover requirements for:
-   movable, non permanent storage equipment such as road vehicles, rail wagons, containers for bulk materials, ships and barges;
-   blow tanks and pressure vessels as used in pneumatic conveying systems;
-   stockpiles and flat storage;
-   storage equipment for non bulk materials (liquid, gas, slurries, sludge, silage);
-   dismantling and transport of storage equipments;
-   procedure for entering the silo and behaviour of persons inside the silo;
-   storage equipments for underground mining;
-   "noise."
This European Standard deals with the technical requirements for electromagnetic compatibility (EMC).

Stetigförderer und Systeme - Sicherheits- und EMV-Anforderungen an Einrichtungen für die Lagerung von Schüttgütern in Silos, Bunkern, Vorratsbehältern und Trichtern

Diese Europäische Norm behandelt die technischen Anforderungen, um die im Abschnitt 4 und Anhang A aufgeführten Gefährdungen zu minimieren. Diese Gefährdungen können während des Betriebs und der Wartung von Einrichtungen zur Lagerung von Schüttgütern in Silos, Bunkern, Vorratsbehältern und Trichtern und ihren angebauten Eintritts- und Austrittsorganen entstehen, wenn diese Tätigkeiten nach den Angaben des Herstellers oder dessen autorisierten Bevollmächtigten durchgeführt werden. Diese Norm befasst sich mit der sicherheitsrelevanten technischen Verifikation während der Inbetriebnahme.
Die folgenden Teile werden in dieser Norm behandelt (siehe Bild 1):
ANMERKUNG   Silos werden aus verschiedenen Materialien hergestellt, z. B. Beton, Stahl, Aluminium, Gewebe, Holz.
Die Sicherheitsanforderungen und/oder Maßnahmen dieser Norm sind auf Geräte anzuwenden, die in allen Umgebungen betrieben werden. Allerdings erfordert der Einsatz unter erschwerten Bedingungen die Berücksichtigung zusätzlicher Gefährdungsanalysen und Sicherheitsmaßnahmen, z. B. niedrige oder hohe Temperaturen außerhalb des Anwendungsbereichs von EN 60204-1, korrosive Umgebungen, starke magnetische Felder, radioaktive Bedingungen und zu lagernde Schüttgüter einschließlich ihres Fließ-verhaltens, die aufgrund ihrer Beschaffenheit gefährliche Situationen hervorrufen könnten.
Nicht abgedeckt werden von dieser Norm Anforderungen für:
-   bewegliche, nicht dauerhafte Lagereinrichtungen wie Straßenfahrzeuge, Eisenbahnwagons, Container für Schüttgut, Schiffe und Frachtkähne;
-   Druckkessel und Druckbehälter, wie sie in pneumatischen Systemen verwendet werden;
-   Lagerhalden und Flachlager;
-   Lagereinrichtungen für andere Materialien als Schüttgüter (Flüssigkeit, Gas, Brei, Schlamm, Silofutter);
-   Demontage und Transport von Lagersystemen;
-   Vorgehensweisen, wie das Silo zu betreten ist, und das Verhalten von Personen innerhalb des Silos;
-   Lagersysteme für den untertägigen Bergbau;
-   "Lärm".
Diese Europäische Norm behandelt die technischen Anforderungen an elektromagnetische Verträglichkeit (EMV).

Equipements et systèmes de manutention continue - Prescriptions de sécurité et de CEM pour les équipements de stockage des produits en vrac en silos, soutes, réservoirs et trémies

La présente norme européenne traite des prescriptions techniques visant à minimiser les phénomènes dangereux énumérés à l'article 4 et dans l'Annexe A. Ces phénomènes dangereux peuvent se produire au cours du fonctionnement et de la maintenance des équipements de stockage des produits en vrac en silos, soutes, réservoirs et trémies ainsi que de leurs dispositifs d'entrée et de sortie intégrés, lorsque ce fonctionnement et cette maintenance s'effectuent conformément aux spécifications données par le fabricant ou son représentant autorisé. La présente norme traite de la vérification technique liée à la sécurité lors de la mise en service.
NOTE   Les silos sont constitués de différents matériaux, par exemple béton, acier, aluminium, fibranne, bois.
Les prescriptions et/ou mesures de sécurité de la présente norme s'appliquent aux équipements utilisés dans tous les types d'environnement. Toutefois, une estimation du risque et des mesures de sécurité complémentaires doivent être envisagées dans des conditions sévères, par exemple températures faibles ou élevées ne relevant pas de la plage couverte par l'EN 60204-1:1997, environnements corrosifs, champs magnétiques élevés, conditions radioactives et produits en vrac à stocker y compris leur écoulement dont la nature pourrait provoquer une situation dangereuse.
La présente norme ne couvre pas les prescriptions relatives :
-   aux équipements de stockage déplaçables, non fixes, tels que véhicules routiers, wagons de chemin de fer, conteneurs pour produits en vrac, navires et barges ;
-   aux réservoirs d’expédition et aux réservoirs à pression utilisés dans les systèmes de manutention pneumatique ;
-   au stockage en tas et sur plancher ;
-   aux équipements pour le stockage de produits autres que les produits en vrac (liquides, gaz, schlamms, boues, ensilage) ;
-   au démontage et au transport des systèmes de stockage ;
-   aux procédures permettant de pénétrer dans les silos et au comportement des personnes à l'intérieur du sil

Naprave in sistemi za kontinuirni transport - Varnostne zahteve in zahteve za elektromagnetno združljivost naprav, sistemov in opreme za hranjenje sipkih materialov v silosih, bunkerjih, zalogovnikih in lijakih (vključno z dopolnilom A1)

Ta evropski standard obravnava tehnične zahteve za zmanjševanje nevarnosti, navedenih v klavzuli 4 in dodatku A. Te nevarnosti lahko nastanejo med delovanjem in vzdrževanjem opreme za hranjenje sipkih materialov v silosih, bunkerjih, zalogovnikih in lijakih ter njihove vgrajene vstopne in izstopne naprave, kadar se izvaja v skladu s specifikacijami, ki jih je podal proizvajalec ali njegov pooblaščeni zastopnik. Ta standard obravnava varnost povezanih tehničnih preverjanj med usposobitvijo za zagon.

General Information

Status
Published
Publication Date
07-Dec-2010
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
05-Mar-2019

Relations

Buy Standard

Standard
EN 617:2002+A1:2011 - BARVE
English language
44 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 617:2002+A1:2011
01-februar-2011
1DGRPHãþD
SIST EN 617:2002
1DSUDYHLQVLVWHPL]DNRQWLQXLUQLWUDQVSRUW9DUQRVWQH]DKWHYHLQ]DKWHYH]D
HOHNWURPDJQHWQR]GUXåOMLYRVWQDSUDYVLVWHPRYLQRSUHPH]DKUDQMHQMHVLSNLK
PDWHULDORYYVLORVLKEXQNHUMLK]DORJRYQLNLKLQOLMDNLK YNOMXþQR]GRSROQLORP$
Continuous handling equipment and systems - Safety and EMC requirements for the
equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
Stetigförderer und Systeme - Sicherheits- und EMV-Anforderungen an Einrichtungen für
die Lagerung von Schüttgütern in Silos, Bunkern, Vorratsbehältern und Trichtern
Equipements et systèmes de manutention continue - Prescriptions de sécurité et de
CEM pour les équipements de stockage des produits en vrac en silos, soutes, réservoirs
et trémies
Ta slovenski standard je istoveten z: EN 617:2001+A1:2010
ICS:
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
53.040.10 Transporterji Conveyors
SIST EN 617:2002+A1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 617:2002+A1:2011

---------------------- Page: 2 ----------------------

SIST EN 617:2002+A1:2011


EUROPEAN STANDARD
EN 617:2001+A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2010
ICS 53.040.10 Supersedes EN 617:2001
English Version
Continuous handling equipment and systems - Safety and EMC
requirements for the equipment for the storage of bulk materials
in silos, bunkers, bins and hoppers
Equipements et systèmes de manutention continue - Stetigförderer und Systeme - Sicherheits- und EMV-
Prescriptions de sécurité et de CEM pour les équipements Anforderungen an Einrichtungen für die Lagerung von
de stockage des produits en vrac en silos, soutes, Schüttgütern in Silos, Bunkern, Vorratsbehältern und
réservoirs et trémies Trichtern
This European Standard was approved by CEN on 4 June 2001 and includes Amendment 1 approved by CEN on 9 November 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 617:2001+A1:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 617:2002+A1:2011
EN 617:2001+A1:2010 (E)

Contents
page
Foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 6
3 Terms and definitions . 8
4 Hazards . 9
5 Safety and EMC requirements and/ or measures . 10
6 Verification of safety and EMC requirements and /or measures . 25
7 Information for use .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.