Fire detection and fire alarm systems - Part 22: Resettable line-type heat detectors

This European Standard applies to resettable line-type heat detectors consisting of a sensing element using an optical fibre, a pneumatic tube or an electrical sensor cable connected to a sensor control unit, either directly or through an interface module, intended for use in fire detection and fire alarm systems installed in and around buildings and other civil engineering works (see EN 54-1:2011).
This European Standard specifies the requirements and performance criteria, the corresponding test methods and provides for the Assessment and Verification of Constancy of Performance (AVCP) of resettable line-type heat detectors to this EN.
This European Standard also covers resettable line-type heat detectors intended for use in the local protection of plant and equipment.
Resettable line-type heat detectors with special characteristics and developed for specific risks are not covered by this EN.
This European Standard does not cover line-type heat detectors that are based on non-resettable, fixed temperature electrical cables (so called digital systems).

Brandmeldeanlagen - Teil 22: Rücksetzbare linienförmige Wärmemelder

Diese Europäische Norm gilt für rücksetzbare linienförmige Wärmemelder mit einem Sensorelement, basierend auf einem Lichtwellenleiter, einem pneumatischen Fühlerrohr oder einem elektrischen Sensorkabel, welches mit einer Auswerteeinheit entweder direkt oder über ein Interface-Modul verbunden ist, und dienen der Verwendung in Brandmeldeanlagen, die innerhalb und außerhalb von Hoch- und Tiefbauten installiert sind (siehe EN 54 1:2011).
Diese Europäische Norm legt Anforderungen und Leistungskriterien sowie die entsprechenden Prüfverfahren fest und behandelt die Bewertung und Überprüfung der Leistungsbeständigkeit (AVCP) von rücksetzbaren linienförmigen Wärmemeldern.
Außerdem gilt diese Europäische Norm auch für rücksetzbare linienförmige Wärmemelder, die zur Einrichtungsüberwachung von Anlagen und Einrichtungen vorgesehen sind.
Rücksetzbare linienförmige Wärmemelder, die spezielle Eigenschaften haben und für Fälle mit besonderen Risiken entwickelt wurden, sind nicht Gegenstand dieser EN.
Diese Europäische Norm gilt nicht für nicht-rücksetzbare linienförmige Wärmemelder basierend auf elektrischen Kabeln mit festgelegter Temperatur (so genannte "digitale" Systeme).

Systèmes de détection et d'alarme incendie - Partie 22 : Détecteurs de chaleur de type linéaire réenclenchables

La présente Norme européenne s'applique aux détecteurs de chaleur de type linéaire réenclenchables qui comprennent un élément capteur utilisant une fibre optique, un tube pneumatique ou un câble électrique capteur raccordé à une unité de commande, de manière directe ou via un module d'interface, destiné à être utilisé dans les systèmes de détection et d'alarme incendie installés dans et autour des bâtiments et d'autres ouvrages de génie civil (voir EN 54-1:2011).
La présente Norme européenne spécifie les exigences et les critères de performance, les méthodes d'essai correspondantes et prévoit l'évaluation et la vérification de la constance des performances (EVCP) des détecteurs de chaleur de type linéaire réenclenchables par rapport à la présente EN.
La présente Norme européenne couvre également les détecteurs de chaleur de type linéaire réenclenchables destinés à être utilisés pour la protection ponctuelle d’installations et d'équipements.
Les détecteurs de chaleur de type linéaire réenclenchables possédant des caractéristiques particulières, conçus pour des risques spéciaux, ne sont pas couverts par la présente EN.
La présente Norme européenne ne couvre pas les détecteurs de chaleur de type linéaire qui sont basés sur des câbles électriques à température fixe, non réenclenchables (appelés systèmes « numériques »).

Sistemi za odkrivanje in javljanje požara ter alarmiranje - 22. del: Linijski toplotni javljalniki z možnostjo ponastavitve TC: Sistemi za odkrivanje in javljanje požara ter alarmiranje - 22. del: Linijski toplotni javljalniki z možnostjo vrnitve v začetno stanje

General Information

Status
Not Published
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
30-Aug-2018
Due Date
05-Jan-2019
Completion Date
30-Aug-2018

Relations

Buy Standard

Draft
EN 54-22:2015/oprA1:2017
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 54-22:2015/oprA1:2017
01-julij-2017
Sistemi za odkrivanje in javljanje požara ter alarmiranje - 22. del: Linijski toplotni
javljalniki z možnostjo ponastavitve
Fire detection and fire alarm systems - Part 22: Resettable line-type heat detectors
Brandmeldeanlagen - Teil 22: Rücksetzbare linienförmige Wärmemelder
Systèmes de détection et d'alarme incendie - Partie 22: Détecteurs de chaleur de type
linéaire réenclenchables
Ta slovenski standard je istoveten z: EN 54-22:2015/prA1
ICS:
13.220.20 3RåDUQD]DãþLWD Fire protection
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
SIST EN 54-22:2015/oprA1:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 54-22:2015/oprA1:2017

---------------------- Page: 2 ----------------------

SIST EN 54-22:2015/oprA1:2017


DRAFT
EUROPEAN STANDARD
EN 54-22:2015
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
May 2017
ICS 13.220.10
English Version

Fire detection and fire alarm systems - Part 22: Resettable
line-type heat detectors
Systèmes de détection et d'alarme incendie - Partie 22: Brandmeldeanlagen - Teil 22: Rücksetzbare
Détecteurs de chaleur de type linéaire réenclenchables linienförmige Wärmemelder
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 72.

This draft amendment A1, if approved, will modify the European Standard EN 54-22:2015. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 54-22:2015/prA1:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 54-22:2015/oprA1:2017
EN 54-22:2015/prA1:2017 (E)
Contents Page
European foreword . 3
1 Modification to 4.6.1 Dry heat (endurance) for sensing element . 4
2 Modification to 5.1.5.3 Multipoint heat detectors . 4
3 Modification to 5.1.7 Test schedule . 4
4 Modification to 5.5.2.2.3.1 Mounting of the sensing element . 4
5 Modification to 5.6.1.2 Dry heat (endurance) sensing element . 4
6 Modification to Table B.1 — Test fires for RLTHD . 6
7 Modification to Table B.2 — End of test condition . 6
8 Modification to Table B.5 — Test validity criteria for test fire TF6S . 7
9 Modification to Annex E (normative), Mounting of the sensing element of multipoint
RLTHD in the heat tunnel . 7
10 Modification to Annex F (normative), Heat tunnel for response time and response
temperature measurements .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.