EN 12350-11:2010
(Main)Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test
Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test
This European Standard specifies the procedure for determining the sieve segregation resistance of self-compacting concrete.
NOTE This test is not applicable to concrete containing fibres or lightweight aggregate.
Prüfung von Frischbeton - Teil 11: Selbstverdichtender Beton - Bestimmung der Sedimentationsstabilität im Siebversuch
Diese Europäische Norm legt das Verfahren zur Bestimmung der Sedimentationsstabilität von selbstver-dichtendem Beton fest.
ANMERKUNG Diese Prüfung ist auf Beton, der Fasern oder leichte Gesteinskörnungen enthält, nicht anwendbar.
Essai pour béton frais - Partie 11: Béton auto-plaçant - Essai de stabilité au tamis
La présente Norme européenne spécifie la méthode de détermination de la résistance à la ségrégation du
béton auto-plaçant par la mesure de la stabilité au tamis.
NOTE Le présent essai n'est pas applicable au béton contenant des fibres ou des granulats légers.
Preskušanje svežega betona - 11. del: Samozgoščevalni beton - Preskus segregacije s sitom
Ta evropski standard določa postopek za ugotavljanje segregacije s sitom za samozgoščevalni beton.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VNXVPrüfung von Frischbeton - Teil 11: Selbstverdichtender Beton - Bestimmung der Sedimentationsstabilität im SiebversuchEssai pour béton frais - Partie 11: Béton auto-plaçant - Essai de stabilité au tamisTesting fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:Ta slovenski standard je istoveten z:EN 12350-11:2010SIST EN 12350-11:2010en,fr,de01-december-2010SIST EN 12350-11:2010SLOVENSKI
STANDARD
SIST EN 12350-11:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12350-11
July 2010 ICS 91.100.30 English Version
Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test
Essai pour béton frais - Partie 11: Béton auto-plaçant - Essai de stabilité au tamis
Prüfung von Frischbeton - Teil 11: Selbstverdichtender Beton - Bestimmung der Sedimentationsstabilität im Siebversuch This European Standard was approved by CEN on 20 June 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12350-11:2010: ESIST EN 12350-11:2010
EN 12350-11:2010 (E) 2 Contents Page Foreword .31Scope .52Normative references .53Principle .54Apparatus .55Test sample .56Procedure .57Test result .78Test report .79Repeatability and reproducibility .7Bibliography .9 SIST EN 12350-11:2010
EN 12350-11:2010 (E) 3 Foreword This document (EN 12350-11:2010) has been prepared by Technical Committee CEN/TC 104 “Concrete and related products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2011, and conflicting national standards shall be withdrawn at the latest by January 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirement
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.