iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1398:1997

(Main)

Dock levellers

Dock levellers

1.1  This standard is applicable to the calculation, design, construction, safety devices, installation, use, maintenance,  and testing of dock levellers.  with the exception of  a) dock levellers for marine and aircraft applications, b) lifting tables, c) vehicles mounted tail lifts.  NOTE 1 : Requirements for lifting tables are laid down in prEN 1570. NOTE 2 : Requirements for vehicles mounted tail lifts are laid down in prEN 1756-1  1.2 This standard includes dock levellers which are used by persons and/or manual or power driven transport equipment (e.g forklift trucks) as traffic paths between goods vehicles, both road vehicles  and rail waggons, and parts buildings such  as loading docks. This standard does not deal with bridging devices where the load is a complete vehicle, such as a self propelled vehicle or towed trailer.           [The scope of the complete standard includes illustrations of types of dock levellers.]  1.3 This standard containes requirements in order to protect persons  and objects against accidents and damage during use and operation of dock levellers.  1.4 Persons to be protected are  a) operators, b) maintaining and inspecting personnel, c) persons near the dock leveller.  1.5 Objects to be protected are  a) goods on dock levellers, b) transport equipment on dock levellers.  1.6 The significant hazards of docks levellers are listed in clause 4. These hazards have been identified by risk assessment according to EN 292-2 and require actions  to avoid the hazard, or to reduce the risk, which are covered in clauses 5 and 6.  1.7 The safety requirements are based on the assumption that the dock levellers are regularly maintained  by competent persons to the instructions of the manufacturer and that the operating persons  have been instructed in the use of the dock levellers.

Ladebrücken

Diese Norm gilt für Berechnung, Bau, Ausrüstung, die Sicherheitseinrichtungen, Installation, Betrieb, Wartung und Prüfung von Ladebrücken mit Ausnahme von a) Ladebrücken für Wasser- und Luftfahrzeuge, b) Hubtische, c) Hubladebühnen (Ladebordwand).

Rampes ajustables

La présente norme est applicable au calcul, à la conception, la construction, aux dispositifs de sécurité, à l'installation, l'emploi, l'entretien et aux essais des rampes ajustables à l'exception des a) rampes ajustables pour applications navales et aéronautiques, b) tables élévatrices, c) hayons élévateurs.

Nagibne premostitvene ploščadi

General Information

Status
Withdrawn
Publication Date
19-Aug-1997
Withdrawal Date
17-Mar-2009
ICS
53.080 - Storage equipment
Technical Committee
CEN/TC 98 - Lifting platforms
Drafting Committee
CEN/TC 98/WG 5 - Dock levellers
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
18-Mar-2009
Completion Date
18-Mar-2009
Directive
89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
98/37/EC - Machinery
Mandate
M/BC/CEN/91/1 - Standardization request to CEN/CENELEC concerning machines presenting hazards due to mobility or load lifting
Ref Project
SIST EN 1398:1999 - Dock levellers

Relations

Replaced By
EN 1398:2009 - Dock levellers - Safety requirements
Effective Date
23-Mar-2009
Corrected By
EN 1398:1997/AC:1998 - Dock levellers
Effective Date
08-Jun-2022

Buy Standard

EN 1398:1999EN 1398:1999
PreviousNext
Standard
EN 1398:1999
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1398:1999
01-april-1999
1DJLEQHSUHPRVWLWYHQHSORãþDGL
Dock levellers
Ladebrücken
Rampes ajustables
Ta slovenski standard je istoveten z: EN 1398:1997
ICS:
53.080 6NODGLãþQDRSUHPD Storage equipment
SIST EN 1398:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1398:1999

---------------------- Page: 2 ----------------------

SIST EN 1398:1999

---------------------- Page: 3 ----------------------

SIST EN 1398:1999

---------------------- Page: 4 ----------------------

SIST EN 1398:1999

---------------------- Page: 5 ----------------------

SIST EN 1398:1999

---------------------- Page: 6 ----------------------

SIST EN 1398:1999

---------------------- Page: 7 ----------------------

SIST EN 1398:1999

---------------------- Page: 8 ----------------------

SIST EN 1398:1999

---------------------- Page: 9 ----------------------

SIST EN 1398:1999

---------------------- Page: 10 ----------------------

SIST EN 1398:1999

---------------------- Page: 11 ----------------------

SIST EN 1398:1999

---------------------- Page: 12 ----------------------

SIST EN 1398:1999

-----------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 14010:2003+A1:2009(Main + Amendment)
Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages
SIST EN 14010:2004+A1:2010

1.1   This European Standard deals with the technical requirements to minimise the risks due to the hazards listed in clause 4, which can arise during installation , operation and maintenance of permanently installed equipment and systems for the power driven parking of motor vehicles, as defined in 3.1 to 3.4 below. Requirements are also given on the provision of information for use, which includes requirements for the drafting of the instructions. Electromagnetic compatibility requirements are also covered.
1.2   This European Standard applies to equipment and systems for the power driven parking of motor vehicles which have four wheels, are within a maximum size envelope of 5,30 m long, by 2,30 m wide, by 2,20 m high and have a mass less than 2500 kg. The equipment can be manually or automatically controlled.
1.3   This standard does not cover:
a)   vehicle lifts (see EN 1493);
b)   peripheral devices, which do not handle motor vehicles, e.g. parking meters, ticket machines;
c)   requirements related to the building even if they support directly stored vehicles;
d)   goods only lifts in accordance with EN 81-31;
e)   power driven parking equipment intended for lifting and/or transporting any person;
f)   transmission and interface of remote controls;
g)   automatic parking equipment with transfer areas which move;
h)   the use of power driven parking equipment by wheelchair users and deaf persons;
i)   the workplace of any attendant.
1.4   This standard does not deal with the following:
a)   hazards arising if loads, or other items fall from vehicles;
b)   hazards arising if fuel or oil leaks from vehicles;
c)   hazards caused by operating the equipment/system in electromagnetic fields outside the range of
EN 61000-6-2;
d)   hazards caused by operating the equipment/system in areas subject to special regulations (e.g. explosive atmospheres, fire risks);
e)   hazards caused by the use of dangerous/toxic materials, e.g. special hydraulic oil;
f)   hazards caused by noise;
g)   (....)

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1398:2009(Main)
Dock levellers - Safety requirements
SIST EN 1398:2010

1.1   This European Standard specifies the safety requirements for design, construction, installation, maintenance and testing of dock levellers and for safety components on dock levellers.
With the exception of:
a)   dock levellers for marine and aircraft applications;
b)   lifting tables;
c)   vehicle mounted tail lifts.
NOTE 1   Requirements for lifting tables are laid down in EN 1570.
NOTE 2   Requirements for vehicle mounted tail lifts are laid down in EN 1756-1.
1.2   This European Standard is applicable to dock levellers which are used by persons and/or manual or power driven transport equipment (e. g. forklift trucks) as traffic paths between goods vehicles, both road vehicles and rail wagons, and parts of buildings such as loading docks. This standard does not deal with other bridging devices not shown in Figure 1.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 528:2021+A1:2022(Main + Amendment)
Rail dependent storage and retrieval equipment - Safety requirements for S/R machines
SIST EN 528:2021+A1:2022

This document applies to all types of Storage and Retrieval (S/R) machines, restricted to the rails on which they travel within and outside the aisles for the storage and retrieval of unit loads and/or long goods such as bar materials and/or for order picking or similar duties. These machines shall embody lifting means along a mast and may include lateral handling facilities. Also included is the transfer equipment used to change between aisles. Control of machines may range from manual to fully automatic.
S/R-machine-related satellite vehicles according to definition 3.20 are included as a load-handling-device (LHD).
References in this standard to racking, buildings and systems only apply where it is necessary to assess the hazards and risks at their interfaces with S/R machines.
This document deals with all significant hazards relevant to rail dependent storage and retrieval equipment, when they are used under the conditions intended by the manufacturer including reasonably foreseeable misuse (see Annex F "List of significant hazards")).
This document applies to machines and equipment that are manufactured after the date of issue of this document.
Illustrations of examples of machines and transfer equipment to which this standard applies are shown in Annex A.
Safety requirements and/or measures in this standard apply to equipment used under indoor conditions. However, additional risk assessments and safety measures need to be considered for uses in severe conditions, e.g. extremely high temperatures, loads, the nature of which could lead to a dangerous situation (e.g. especially brittle loads, explosives), earthquake effects and also contact with foodstuff.
This document also deals with the technical requirements for electromagnetic compatibility (EMC).

  • Standard
    100 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    113 pages
    French language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15512:2020+A1:2022(Main + Amendment)
Steel static storage systems - Adjustable pallet racking systems - Principles for structural design
SIST EN 15512:2021+A1:2022

This document specifies the structural design requirements applicable to all types of adjustable beam pallet rack systems fabricated from steel members intended for the storage of unit loads and subject to predominantly static loads. Both un-braced and braced systems are included.
This document gives guidelines for the design of clad rack buildings where requirements are not covered in the EN 1993 series. The requirements of this document also apply to ancillary structures, where rack components are employed as the main structural members.
This document does not cover other generic types of storage structures. Specifically, this document does not apply to mobile storage systems, drive-in, drive-through, pallet live storage, push back, shuttle systems, systems where two or more cranes operates one above another in the same aisle and cantilever racks or static steel shelving systems.
For the specific design of adjustable pallet racking for use in seismic areas, this document is to be used in combination with EN 16681.

  • Standard
    182 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15620:2021(Main)
Steel static storage systems - Tolerances, deformations and clearances
SIST EN 15620:2021

This document specifies tolerances, deformations and clearances that pertain to the production, assembly and erection and performance under load of pallet racking and cantilever racking. These tolerances, deformations and clearances are important in relation to the functional requirements and ensuring the proper interaction of the handling equipment used by personnel, trained and qualified as competent, in association with the specific type of racking system. The interaction conditions are also important in determining the reliability of the storage system to ensure that the chance of mechanical handling equipment impact, pallet impact or a system breakdown is acceptably low.
This document is limited to:
— single deep adjustable beam pallet racking operated with industrial trucks;
— single and double deep adjustable beam pallet racking operated with stacker cranes;
— drive-in and drive through racking systems operated with industrial trucks;
— cantilever racking systems operated with industrial trucks.
This document does not apply to specialized types of equipment such as automated trucks, miniload, satellite systems, systems involving the use of articulated trucks, trucks using intrusive stacking methods or industrial truck serviced rack-clad buildings.
This document specifically excludes the tolerances and deformation of the industrial trucks, stacker cranes and floors.
It is the responsibility of the specifier in cooperation with the client or user to ensure that the tolerances, deformations and clearances, as quoted in this document are acceptable for safe operation of the overall system considering all factors of influence and the user informed by means such as operation instructions. The specifier can carry out appropriate design/calculations to vary some of the parameters provided that an equivalent safe operation is achieved.
This document gives guidance to be used in conjunction with mechanical handling equipment and floor information.
This document gives guidance to be used in conjunction with mechanical handling equipment and floor information.

  • Standard
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16681:2016(Main)
Steel static storage systems - Adjustable pallet racking systems - Principles for seismic design
SIST EN 16681:2016

This European Standard specifies the structural design requirements applicable to all types of adjustable pallet racking systems fabricated from steel members, intended for storage of unit loads and subject to seismic actions.
This European Standard gives also guidelines for the design of clad rack buildings in seismic zones, where requirements are not covered in the EN 1998 series.
This European Standard does not cover other generic types of storage structures. Specifically, this European Standard does not apply to mobile storage systems, drive-in, drive-through and cantilever racks or static steel shelving systems.
This European Standard does not apply to the design of seismic isolated racking structures.

  • Standard
    83 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12195-1:2010(Main)
Load restraining on road vehicles - Safety - Part 1: Calculation of securing forces
SIST EN 12195-1:2011

This European Standard is applicable to the design of securing methods (blocking, lashing, and combinations) for securing of loads for surface transport by road vehicles or parts of them (lorries, trailers, containers and swap bodies), including their transport on vessels or by rail and/or combinations thereof. Hump shunting with acceleration over 1 g during railway transport is excluded, as it is not foreseen in combined transport. (Web lashings see EN 12195-2, lashing chains see EN 12195-3, lashing steel wire ropes see EN 12195-4).
This European Standard does not apply for vehicles with a total weight equal to or lower than 3 500 kg.
NOTE   Lighter vehicles can have driving characteristics, which give higher values of acceleration on the road.
For dimensioning of load securing a distinction is made between stable loads and loads liable to tilting.
Furthermore, the acceleration coefficients for surface transport are specified.
For over top lashing the force loss in the tension force of the lashing at the outer edges between load and lashing is taken into account. The securing forces to be chosen for calculation in this EN 12195-1 are static forces produced by blocking or tensioning of lashings and dynamic forces, which act on the lashing as a reaction of the load movements.
Examples for the application of calculations are given in Annex A.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15878:2010(Main)
Steel static storage systems - Terms and definitions
SIST EN 15878:2010

This European Standard specifies terms and definitions for steel storage systems, as listed in Table 1, and their basic components and accessories.
NOTE   Terms and definitions for mechanical handling equipment and load make-up accessories are included in informative annexes.

  • Standard
    88 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14010:2003+A1:2009(Main + Amendment)
Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages
SIST EN 14010:2004+A1:2010

1.1   This European Standard deals with the technical requirements to minimise the risks due to the hazards listed in clause 4, which can arise during installation , operation and maintenance of permanently installed equipment and systems for the power driven parking of motor vehicles, as defined in 3.1 to 3.4 below. Requirements are also given on the provision of information for use, which includes requirements for the drafting of the instructions. Electromagnetic compatibility requirements are also covered.
1.2   This European Standard applies to equipment and systems for the power driven parking of motor vehicles which have four wheels, are within a maximum size envelope of 5,30 m long, by 2,30 m wide, by 2,20 m high and have a mass less than 2500 kg. The equipment can be manually or automatically controlled.
1.3   This standard does not cover:
a)   vehicle lifts (see EN 1493);
b)   peripheral devices, which do not handle motor vehicles, e.g. parking meters, ticket machines;
c)   requirements related to the building even if they support directly stored vehicles;
d)   goods only lifts in accordance with EN 81-31;
e)   power driven parking equipment intended for lifting and/or transporting any person;
f)   transmission and interface of remote controls;
g)   automatic parking equipment with transfer areas which move;
h)   the use of power driven parking equipment by wheelchair users and deaf persons;
i)   the workplace of any attendant.
1.4   This standard does not deal with the following:
a)   hazards arising if loads, or other items fall from vehicles;
b)   hazards arising if fuel or oil leaks from vehicles;
c)   hazards caused by operating the equipment/system in electromagnetic fields outside the range of
EN 61000-6-2;
d)   hazards caused by operating the equipment/system in areas subject to special regulations (e.g. explosive atmospheres, fire risks);
e)   hazards caused by the use of dangerous/toxic materials, e.g. special hydraulic oil;
f)   hazards caused by noise;
g)   (....)

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1398:2009(Main)
Dock levellers - Safety requirements
SIST EN 1398:2010

1.1   This European Standard specifies the safety requirements for design, construction, installation, maintenance and testing of dock levellers and for safety components on dock levellers.
With the exception of:
a)   dock levellers for marine and aircraft applications;
b)   lifting tables;
c)   vehicle mounted tail lifts.
NOTE 1   Requirements for lifting tables are laid down in EN 1570.
NOTE 2   Requirements for vehicle mounted tail lifts are laid down in EN 1756-1.
1.2   This European Standard is applicable to dock levellers which are used by persons and/or manual or power driven transport equipment (e. g. forklift trucks) as traffic paths between goods vehicles, both road vehicles and rail wagons, and parts of buildings such as loading docks. This standard does not deal with other bridging devices not shown in Figure 1.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day