iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1398:1999

(Main)

Dock levellers

Dock levellers

1.1  This standard is applicable to the calculation, design, construction, safety devices, installation, use, maintenance,  and testing of dock levellers.  with the exception of  a) dock levellers for marine and aircraft applications, b) lifting tables, c) vehicles mounted tail lifts.  NOTE 1 : Requirements for lifting tables are laid down in prEN 1570. NOTE 2 : Requirements for vehicles mounted tail lifts are laid down in prEN 1756-1  1.2 This standard includes dock levellers which are used by persons and/or manual or power driven transport equipment (e.g forklift trucks) as traffic paths between goods vehicles, both road vehicles  and rail waggons, and parts buildings such  as loading docks. This standard does not deal with bridging devices where the load is a complete vehicle, such as a self propelled vehicle or towed trailer.           [The scope of the complete standard includes illustrations of types of dock levellers.]  1.3 This standard containes requirements in order to protect persons  and objects against accidents and damage during use and operation of dock levellers.  1.4 Persons to be protected are  a) operators, b) maintaining and inspecting personnel, c) persons near the dock leveller.  1.5 Objects to be protected are  a) goods on dock levellers, b) transport equipment on dock levellers.  1.6 The significant hazards of docks levellers are listed in clause 4. These hazards have been identified by risk assessment according to EN 292-2 and require actions  to avoid the hazard, or to reduce the risk, which are covered in clauses 5 and 6.  1.7 The safety requirements are based on the assumption that the dock levellers are regularly maintained  by competent persons to the instructions of the manufacturer and that the operating persons  have been instructed in the use of the dock levellers.

Ladebrücken

Diese Norm gilt für Berechnung, Bau, Ausrüstung, die Sicherheitseinrichtungen, Installation, Betrieb, Wartung und Prüfung von Ladebrücken mit Ausnahme von a) Ladebrücken für Wasser- und Luftfahrzeuge, b) Hubtische, c) Hubladebühnen (Ladebordwand).

Rampes ajustables

La présente norme est applicable au calcul, a la conception, la construction, aux dispositifs de sécurité, a l'installation, l'emploi, l'entretien et aux essais des rampes ajustables a l'exception des a) rampes ajustables pour applications navales et aéronautiques, b) tables élévatrices, c) hayons élévateurs.

Nagibne premostitvene ploščadi

General Information

Status
Withdrawn
Publication Date
31-Mar-1999
Withdrawal Date
19-Jan-2010
ICS
53.080 - Storage equipment
Technical Committee
DTN - Lift and transport appliances
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
20-Jan-2010
Due Date
12-Feb-2010
Completion Date
20-Jan-2010
Directive
89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
98/37/EC - Machinery
Mandate
M/BC/CEN/91/1 - Standardization request to CEN/CENELEC concerning machines presenting hazards due to mobility or load lifting
Ref Project
EN 1398:1997 - Dock levellers

Relations

Corrected By
SIST EN 1398:1999/AC:2001 - Dock levellers- Amendment AC
Effective Date
01-Feb-2001
Replaced By
SIST EN 1398:2010 - Dock levellers - Safety requirements
Effective Date
01-Mar-2010
Corrected By
SIST EN 1398:1999/AC:2001 - Dock levellers- Amendment AC
Effective Date
08-Jun-2022

Buy Standard

EN 1398:1999EN 1398:1999
PreviousNext
Standard
EN 1398:1999
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1398:1999
01-april-1999
1DJLEQHSUHPRVWLWYHQHSORãþDGL
Dock levellers
Ladebrücken
Rampes ajustables
Ta slovenski standard je istoveten z: EN 1398:1997
ICS:
53.080 6NODGLãþQDRSUHPD Storage equipment
SIST EN 1398:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1398:1999

---------------------- Page: 2 ----------------------

SIST EN 1398:1999

---------------------- Page: 3 ----------------------

SIST EN 1398:1999

---------------------- Page: 4 ----------------------

SIST EN 1398:1999

---------------------- Page: 5 ----------------------

SIST EN 1398:1999

---------------------- Page: 6 ----------------------

SIST EN 1398:1999

---------------------- Page: 7 ----------------------

SIST EN 1398:1999

---------------------- Page: 8 ----------------------

SIST EN 1398:1999

---------------------- Page: 9 ----------------------

SIST EN 1398:1999

---------------------- Page: 10 ----------------------

SIST EN 1398:1999

---------------------- Page: 11 ----------------------

SIST EN 1398:1999

---------------------- Page: 12 ----------------------

SIST EN 1398:1999

-----------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 528:2021+A1:2022(Main)
Rail dependent storage and retrieval equipment - Safety requirements for S/R machines
EN 528:2021+A1:2022

This document applies to all types of Storage and Retrieval (S/R) machines, restricted to the rails on which they travel within and outside the aisles for the storage and retrieval of unit loads and/or long goods such as bar materials and/or for order picking or similar duties. These machines shall embody lifting means along a mast and may include lateral handling facilities. Also included is the transfer equipment used to change between aisles. Control of machines may range from manual to fully automatic.
S/R-machine-related satellite vehicles according to definition 3.20 are included as a load-handling-device (LHD).
References in this standard to racking, buildings and systems only apply where it is necessary to assess the hazards and risks at their interfaces with S/R machines.
This document deals with all significant hazards relevant to rail dependent storage and retrieval equipment, when they are used under the conditions intended by the manufacturer including reasonably foreseeable misuse (see Annex F "List of significant hazards")).
This document applies to machines and equipment that are manufactured after the date of issue of this document.
Illustrations of examples of machines and transfer equipment to which this standard applies are shown in Annex A.
Safety requirements and/or measures in this standard apply to equipment used under indoor conditions. However, additional risk assessments and safety measures need to be considered for uses in severe conditions, e.g. extremely high temperatures, loads, the nature of which could lead to a dangerous situation (e.g. especially brittle loads, explosives), earthquake effects and also contact with foodstuff.
This document also deals with the technical requirements for electromagnetic compatibility (EMC).

  • Standard
    100 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    113 pages
    French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1398:2010
Dock levellers - Safety requirements
EN 1398:2009

This European Standard specifies the safety requirements for design, construction, installation, maintenance and testing of dock levellers and for safety components on dock levellers. With the exception of: a) dock levellers for marine and aircraft applications; b) lifting tables; c) vehicle mounted tail lifts. This European Standard is applicable to dock levellers which are used by persons and/or manual or power driven transport equipment (e. g. forklift trucks) as traffic paths between goods vehicles, both road vehicles and rail wagons, and parts of buildings such as loading docks. This standard does not deal with other bridging devices not shown in Figure 1. This European Standard specifies requirements in order to protect persons and objects against accidents and health problems and damage during use and operation of dock levellers. Persons to protect are: a) operators and users; b) maintaining and inspecting personnel; c) persons near the dock leveller. Objects to be protected are: d) goods on dock levellers; e) transport equipment on dock levellers. The significant hazards of dock levellers are listed in Clause 4. These hazards have been identified by risk assessment according to EN ISO 12100-2 and require actions to avoid the hazard, or to reduce the risk, which are covered in Clause 5. The safety requirements are based on the assumption that the dock levellers are regularly maintained by competent persons to the instructions of the manufacturer and that the operating person has been instructed in the use of the dock leveller. This European Standard is not applicable to dock levellers which are manufactured before the date of its publication as EN. This European Standard deals with all significant hazards, hazardous situations and events relevant to dock Levellers, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14010:2004+A1:2010(Main)
Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages
EN 14010:2003+A1:2009

This European Standard deals with the technical requirements to minimise the risks due to the hazards listed in clause 4, which can arise during installation1, operation and maintenance of permanently installed equipment and systems for the power driven parking of motor vehicles, as defined in 3.1 to 3.4 below. Requirements are also given on the provision of information for use, which includes requirements for the drafting of the instructions. Electromagnetic compatibility requirements are also covered. This European Standard applies to equipment and systems for the power driven parking of motor vehicles which have four wheels, are within a maximum size envelope of 5,30 m long, by 2,30 m wide, by 2,20 m high and have a mass less than 2500 kg. The equipment can be manually or automatically controlled.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15095:2008+A1:2009(Main)
Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements
EN 15095:2007+A1:2008

This European Standard provides terms and definitions on concepts and parameters used for EN 1005-21), prEN 1005-3, EN 1005-41) and EN 1005-51).
Basic concepts and general ergonomic principles for the design of machinery are dealt with in EN 292-1, EN 292-2 and EN 614-1.
This document is not applicable to specify the machinery which is manufactured before the date of publication of this document by CEN.
This European Standard deals with the safety requirements for the following types of power-operated storage equipment:- storage carousels;- storage lifts;- mobile shelving, pallet racking and cantilever racking.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12195-4:2004(Main)
Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes
EN 12195-4:2003

This Part 4 of EN 12195
- specifies safety requirements for lashing steel wire ropes and flat lashing steel wire ropes and lashing combina-tions with lashing steel wire ropes for the safe surface transport of loads on load carriers, e. g. trucks and trailers which are used on roads or located on vessels or on rail waggons and/or combinations thereof;
- stipulates procedures for testing lashing steel wire ropes and flat lashing steel wire ropes;
- deals with hazards which could occur when lashing steel wire ropes and flat lashing steel wire ropes are in use as intended and under conditions foreseen by the manufacturer (see clause 4 and Annex A).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12195-3:2001(Main)
Load restraint assemblies on road vehicles - Safety - Part 3: Lashing chains
EN 12195-3:2001

This Part of EN 12195 specifies safety requirements for lashing chains and lashing combinations with chain for the safe surface transport of goods on load carriers, e.g. trucks and trailers which are used on roads or located on vessels or on rail waggons and/or combinations thereof. The standard includes only tensioning devices to be hand driven with a maximum handforce of 500 N. It does not give requirements for multi-purpose lover blocks other than to the type of fine calibrated chain and the additional marking  of the maximum hand-operating force.
This part of EN 12195 deals with hazards which could occur when lashing chains are in use as intended and under conditions foreseen by the manufacturer (see clause 4 and Annex A).

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12195-2:2001(Main)
Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres
EN 12195-2:2000

This Part of EN 12195 specifies safety requirements for web lashing made from man-made fibres with flat woven webbings for multiple use and of lashing combinations with woven webbings for the safe surface transport of goods on road vehicles, e.g. trucks and trailers which are used on roads or located on vessels or on rail waggons and/or combinations thereof; specifies methods for testing of web lashing for securing of loads; etc.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 12195-1:2008(Main)
Load restraint assemblies on road vehicles - Safety - Part 1: Calculation of securing forces
prEN 12195-1

This Part of prEN 12195 specifies acceleration coefficients for surface transport. It also gives methods of calculation of lashing forces acting on goods on load carriers, lorries, trailers and swap bodies, either on road, on vessels or by rail and/or combinations thereof for different types of load and different types of lashing. It  excludes the hump shunting during railway transport (web lashings see EN 12195-2, lashing chains see EN 12195-3, wire lashing ropes see prEN 12195-4).
The lashing forces to be chosen for calculation in this EN 12195-1 are static forces produced by tensioning of lashings and dynamic forces, which act on the lashing as a reaction of the load movements.
Instructions for the application of calculations are also specified.

  • Draft
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 528:2021+A1:2022(Main)
Rail dependent storage and retrieval equipment - Safety requirements for S/R machines
EN 528:2021+A1:2022

This document applies to all types of Storage and Retrieval (S/R) machines, restricted to the rails on which they travel within and outside the aisles for the storage and retrieval of unit loads and/or long goods such as bar materials and/or for order picking or similar duties. These machines shall embody lifting means along a mast and may include lateral handling facilities. Also included is the transfer equipment used to change between aisles. Control of machines may range from manual to fully automatic.
S/R-machine-related satellite vehicles according to definition 3.20 are included as a load-handling-device (LHD).
References in this standard to racking, buildings and systems only apply where it is necessary to assess the hazards and risks at their interfaces with S/R machines.
This document deals with all significant hazards relevant to rail dependent storage and retrieval equipment, when they are used under the conditions intended by the manufacturer including reasonably foreseeable misuse (see Annex F "List of significant hazards")).
This document applies to machines and equipment that are manufactured after the date of issue of this document.
Illustrations of examples of machines and transfer equipment to which this standard applies are shown in Annex A.
Safety requirements and/or measures in this standard apply to equipment used under indoor conditions. However, additional risk assessments and safety measures need to be considered for uses in severe conditions, e.g. extremely high temperatures, loads, the nature of which could lead to a dangerous situation (e.g. especially brittle loads, explosives), earthquake effects and also contact with foodstuff.
This document also deals with the technical requirements for electromagnetic compatibility (EMC).

  • Standard
    100 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    113 pages
    French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15512:2021+A1:2022(Main)
Steel static storage systems - Adjustable pallet racking systems - Principles for structural design
EN 15512:2020+A1:2022

This document specifies the structural design requirements applicable to all types of adjustable beam pallet rack systems fabricated from steel members intended for the storage of unit loads and subject to predominantly static loads. Both un-braced and braced systems are included.
This document gives guidelines for the design of clad rack buildings where requirements are not covered in the EN 1993 series. The requirements of this document also apply to ancillary structures, where rack components are employed as the main structural members.
This document does not cover other generic types of storage structures. Specifically, this document does not apply to mobile storage systems, drive-in, drive-through, pallet live storage, push back, shuttle systems, systems where two or more cranes operates one above another in the same aisle and cantilever racks or static steel shelving systems.
For the specific design of adjustable pallet racking for use in seismic areas, this document is to be used in combination with EN 16681.

  • Standard
    182 pages
    English language
    sale 10% off
    e-Library read for
    1 day