EN 959:2007
(Main)Mountaineering equipment - Rock anchors - Safety requirements and test methods
Mountaineering equipment - Rock anchors - Safety requirements and test methods
This European Standard specifies safety requirements and test methods for rock anchors for use in
mountaineering including climbing.
Bergsteigerausrüstung - Bohrhaken - Sicherheitstechnische Anforderungen und Prüfverfahren
Diese Norm legt sicherheitstechnische Anforderungen und Prüfverfahren für Bohrhaken fest, die im Rahmen
von Alpinsportarten einschließlich Klettern verwendet werden.
Equipement d'alpinisme et d'escalade - Amarrages pour rocher - Exigences de sécurité et méthodes d'essai
La présente Norme Européenne spécifie les exigences de sécurité et les méthodes d’essai des amarrages pour rocher, utilisés en alpinisme et en escalade.
Gorniška oprema - Sidra za skalo - Varnostne zahteve in preskusne metode
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Mountaineering equipment - Rock anchors - Safety requirements and test methodsGorniška oprema - Sidra za skalo - Varnostne zahteve in preskusne metodeEquipement d'alpinisme et d'escalade - Amarrages pour rocher - Exigences de sécurité et méthodes d'essaiBergsteigerausrüstung - Bohrhaken - Sicherheitstechnische Anforderungen und PrüfverfahrenTa slovenski standard je istoveten z:EN 959:2007SIST EN 959:2008en97.220.40ICS:SIST EN 959:19981DGRPHãþDSLOVENSKI
STANDARDSIST EN 959:200801-marec-2008
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 959June 2007ICS 97.220.40Supersedes EN 959:1996
English VersionMountaineering equipment - Rock anchors - Safetyrequirements and test methodsEquipement d'alpinisme et d'escalade - Amarrages pourrocher - Exigences de sécurité et méthodes d'essaiBergsteigerausrüstung - Bohrhaken - SicherheitstechnischeAnforderungen und PrüfverfahrenThis European Standard was approved by CEN on 10 May 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 959:2007: E
EN 959:2007 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Safety requirements.5 4.1 Materials.5 4.2 Design.5 4.3 Loadbearing capacity.7 5 Test methods.7 5.1 Check of materials.7 5.2 Apparatus.7 5.3 Procedure.7 6 Marking.9 7 Information supplied by the manufacturer.10 Annex A (informative)
Standards on mountaineering equipment.11 Annex B (informative)
Choice of materials for different environmental conditions and the
consequences for inspection and maintenance.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.