Corrosion tests in artificial atmospheres - Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying (ISO 21207:2015)

ISO 21207:2015 defines two accelerated corrosion test methods to be used in assessing the corrosion resistance of products with metals in environments where there is a significant influence of chloride ions, mainly as sodium chloride from a marine source or by winter road de-icing salt, and of corrosion-promoting gases from industrial or traffic air pollution.
ISO 21207:2015 specifies both the test apparatus and test procedures to be used in executing the accelerated corrosion tests.
The methods are especially suitable for assessing the corrosion resistance of sensitive products with metals, e.g. electronic components, used in traffic and industrial environments.

Korrosionsprüfungen in künstlichen Atmosphären - Beschleunigte Korrosionstests mit alternativer Einwirkung von korrosionsfördernden Gasen, neutraler Salzsprühung und Trocknung (ISO 21207:2015)

Diese Internationale Norm legt zwei beschleunigte Korrosionsprüfverfahren fest, die bei der Beurteilung der Korrosionsbeständigkeit von metallhaltigen Produkten in Umgebungen anzuwenden sind, in denen ein signifikanter Einfluss von Chloridionen, hauptsächlich in Form von Natriumchlorid aus marinen Quellen oder durch Auftausalz für den Straßenwinterdienst, und von korrosionsbegünstigenden Gasen aus industrie- oder verkehrsbedingter Luftverschmutzung vorliegt.
Diese Internationale Norm legt sowohl die Prüfeinrichtungen als auch die Prüfverfahren fest, die bei der Ausführung der beschleunigten Korrosionsversuche anzuwenden sind.
Die Verfahren sind besonders für die Beurteilung der Korrosionsbeständigkeit von empfindlichen metall¬haltigen Produkten, z. B. elektronischen Bauelementen, geeignet, die in Verkehrs- und Industrieumgebungen eingesetzt werden.

Essais de corrosion en atmosphères artificielles - Essais de corrosion accélérée par expositions alternées à des gaz oxydants ou au brouillard salin neutre et à un séchage (ISO 21207:2015)

Ce document définit deux méthodes d’essai de corrosion accélérée à utiliser pour évaluer la résistance à la corrosion de produits contenant des métaux dans des environnements où les facteurs qui jouent un rôle significatif sont les ions chlorure, notamment sous forme de chlorure de sodium provenant d’une source marine ou des sels de déverglaçage des routes en hiver, et les gaz corrosifs résultant de la pollution industrielle ou de la circulation routière.
Ce document spécifie à la fois l’appareillage et les modes opératoires d’essai à utiliser pour exécuter les essais de corrosion accélérée.
Ces méthodes sont particulièrement appropriées à l’évaluation de la résistance à la corrosion des produits sensibles contenant des métaux, par exemple les composants électroniques, qui sont utilisés dans les environnements industriels et sur le réseau routier.

Korozijski preskusi v umetnih atmosferah - Pospešeni korozijski preskusi, ki vključujejo izmenično izpostavljenost plinom, ki spodbujajo korozijo, nevtralnemu razprševanju soli in sušenju (ISO 21207:2015)

Ta mednarodni standard opredeljuje dve metodi pospešenega preskušanja korozije, ki se uporabljata pri vrednotenju korozijske odpornosti izdelkov s kovinami v okoljih z znatnim vplivom kloridnih ionov, predvsem natrijevega klorida iz morskega vira ali zimske soli za razledenitev cest, in
plinov, ki spodbujajo korozijo zaradi industrijskega ali prometnega onesnaževanja zraka.
Ta mednarodni standard določa preskusne naprave in preskusne postopke, ki se uporabljajo pri izvajanju pospešenega preskušanja korozije.
Metodi sta posebej primerni za ocenjevanje korozijske odpornosti občutljivih izdelkov, ki vključujejo
kovine, kot so npr. elektronske komponente, uporabljene v prometnih in industrijskih okoljih.

General Information

Status
Published
Publication Date
21-Jun-2022
Withdrawal Date
30-Dec-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
22-Jun-2022
Due Date
15-Nov-2023
Completion Date
22-Jun-2022

Relations

Buy Standard

Standard
EN ISO 21207:2022
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2022
Korozijski preskusi v umetnih atmosferah - Pospešeni korozijski preskusi, ki
vključujejo izmenično izpostavljenost plinom, ki spodbujajo korozijo, nevtralnemu
razprševanju soli in sušenju (ISO 21207:2015)
Corrosion tests in artificial atmospheres - Accelerated corrosion tests involving alternate
exposure to corrosion-promoting gases, neutral salt-spray and drying (ISO 21207:2015)
Korrosionsprüfungen in künstlichen Atmosphären - Beschleunigte Korrosionstests mit
alternativer Einwirkung von korrosionsfördernden Gasen, neutraler Salzsprühung und
Trocknung (ISO 21207:2015)
Essais de corrosion en atmosphères artificielles - Essais de corrosion accélérée par
expositions alternées à des gaz oxydants ou au brouillard salin neutre et à un séchage
(ISO 21207:2015)
Ta slovenski standard je istoveten z: EN ISO 21207:2022
ICS:
77.060 Korozija kovin Corrosion of metals
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 21207
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2022
EUROPÄISCHE NORM
ICS 77.060
English Version
Corrosion tests in artificial atmospheres - Accelerated
corrosion tests involving alternate exposure to corrosion-
promoting gases, neutral salt-spray and drying (ISO
21207:2015)
Essais de corrosion en atmosphères artificielles - Korrosionsprüfungen in künstlichen Atmosphären -
Essais de corrosion accélérée par expositions alternées Beschleunigte Korrosionstests mit alternativer
à des gaz oxydants ou au brouillard salin neutre et à un Einwirkung von korrosionsfördernden Gasen,
séchage (ISO 21207:2015) neutraler Salzsprühung und Trocknung (ISO
21207:2015)
This European Standard was approved by CEN on 20 June 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 21207:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
The text of ISO 21207:2015 has been prepared by Technical Committee ISO/TC 156 "Corrosion of
metals and alloys” of the International Organization for Standardization (ISO) and has been taken over
as EN ISO 21207:2022 by Technical Committee CEN/TC 262 “Metallic and other inorganic coatings,
including for corrosion protection and corrosion testing of metals and alloys” the secretariat of which is
held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2022, and conflicting national standards
shall be withdrawn at the latest by December 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 21207:2015 has been approved by CEN as EN ISO 21207:2022 without any modification.

INTERNATIONAL ISO
STANDARD 21207
Second edition
2015-12-15
Corrosion tests in artificial
atmospheres — Accelerated corrosion
tests involving alternate exposure to
corrosion-promoting gases, neutral
salt-spray and drying
Essais de corrosion en atmosphères artificielles — Essais de corrosion
accélérée par expositions alternées à des gaz oxydants ou au
brouillard salin neutre et à un séchage
Reference number
ISO 21207:2015(E)
©
ISO 2015
ISO 21207:2015(E)
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

ISO 21207:2015(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Apparatus and reagents . 1
4 Evaluation of the corrosivity of the tests . 2
4.1 Reference test panels . 2
4.2 Arrangement of the reference panels during testing . 3
4.3 Determination of mass loss after testing . 3
4.4 Satisfactory performance of test . 3
5 Test objects . 4
6 Procedure. 4
6.1 Test method A . 4
6.1.1 Test cycle . 4
6.1.2 Salt spray testing followed by drying (step a) . 4
6.1.3 Exposure to corrosive gases followed by drying (step b) . 5
6.1.4 Test duration . 5
6.2 Test method B . 5
6.2.1 Test cycle . 5
6.2.2 Salt spray testing followed by drying (step a or step c) . 6
6.2.3 Exposure to corrosive gases (step b or step d) . 6
6.2.4 Test duration . 6
7 Evaluation of results . 6
8 Test report . 7
Annex A (informative) Recommended test periods . 8
Bibliography . 9
ISO 21207:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 156, Corrosion of metals and alloys.
This second edition cancels and replaces the first edition (ISO 21207:2004), of which it constitutes a
minor revision. It also incorporates the Technical Corrigendum ISO 21207:2004/Cor 1:2008.
iv © ISO 2015 – All rights reserved

ISO 21207:2015(E)
Introduction
Corrosion of metallic materials with or without corrosion protection is influenced by many
environmental factors, the importance of which can vary with the type of metallic material and with
the type of environment. Laboratory tests are designed to simulate the effects of the most important
factors that enhance the corrosion of metallic materials.
The accelerated corrosion test methods described in this International Standard, methods A and B,
are designed to simulate and enhance the environmental influence of exposure to an outd
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.