Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks

This European Standard gives requirements for the types of industrial trucks specified in the scope of EN ISO 3691-5.
This European Standard is intended to be used in conjunction with EN ISO 3691-5. These requirements are supplementary to those stated in EN ISO 3691-5 with the addition of the following hazards:
-   Electromagnetic compatibility (EMC);
-   When operating in potentially explosive atmospheres.
This European standard partially replaces the following requirements of EN ISO 3691-5:
-   Electrical requirements
This European standard defines supplementary requirements to EN ISO 3691-5:
-   Protection against crushing, shearing and trapping;
-   Information for use (instruction handbook and marking).
Annex A (informative) contains the list of significant hazards covered by this standard.

Flurförderzeuge - Sicherheitstechnische Anforderungen und Verifizierung - Teil 5: Zusätzliche Anforderungen für mitgängerbetriebene Flurförderzeuge

Dieses Dokument enthält Anforderungen an die im Anwendungsbereich von EN ISO 3691 5 aufgeführten Flurförderzeugtypen.
Dieses Dokument muss in Verbindung mit prEN ISO 3691-5 angewandt werden. Diese Anforderungen gelten zusätzlich zu denen in EN ISO 3691-5 aufgeführten:
-   Elektromagnetische Verträglichkeit (EMV);
-   für den Einsatz potentiell explosiver Umgebung .
Das vorliegende Dokument ersetzt teilweise die folgenden Anforderungen von EN ISO 3691 5:
-   Elektrische Anforderungen.
Dieses Dokument legt gegenüber EN ISO 3691 5 zusätzliche Anforderungen fest:
-   Schutz vor quetschen, scheren und fangen;
-   Benutzerinformationen (Betriebsanleitung und Kennzeichnung).
Anhang A (informativ) enthält die Liste der signifikanten Gefährdungen, die in dieser Norm behandelt sind.

Chariots de manutention - Exigences de sécurité et vérification - Partie 5: Exigences supplémentaires pour les chariots à conducteur accompagnant

La présente Norme européenne donne des prescriptions pour les types de chariots de manutention tels que spécifiés dans le domaine d’application de l’EN ISO 3691-5.
La présente Norme européenne est destinée à être utilisée en conjonction avec l’EN ISO 3691-5. Ces prescriptions sont complémentaires à celles énoncées dans l’EN ISO 3691-5 avec l’ajout des phénomènes dangereux suivants :
-   Compatibilité électromagnétique (EMC) ;
-   fonctionnement en atmosphère explosible.
La présente Norme européenne remplace partiellement les prescriptions suivantes de l’EN ISO 3691-5 :
-   Prescriptions électriques.
La présente Norme européenne définit des prescriptions supplémentaires à l’EN ISO 3691-5 :
-   protection contre l’écrasement, le cisaillement et l’emprisonnement ;
-   informations pour l’utilisation (notice d’instruction et marquage).
L’Annexe A (informative) contient la liste des phénomènes dangereux significatifs couverts par la présente Norme européenne.

Vozila za talni transport - Varnostne zahteve in preverjanje - 5. del: Dodatne zahteve za vozila, ki jih poganja pešec

Ta evropski standard podaja zahteve za vrste vozil za talni transport, ki so navedene v okviru standarda EN ISO 3691-5. Ta evropski standard je treba uporabljati v povezavi s standardom EN ISO 3691-5. Te zahteve dopolnjujejo zahteve iz standarda EN ISO 3691-5 in dodatno obravnavajo naslednja tveganja: – elektromagnetno združljivost (EMC); – pri obratovanju v potencialno eksplozivnih atmosferah. Ta evropski standard delno nadomešča naslednje zahteve standarda EN ISO 3691-5: – električne zahteve. Ta evropski standard določa dodatne zahteve za standard EN ISO 3691-5: – zaščita pred zdrobitvijo, urezninami in ukleščenjem; – informacije za uporabo (priročnik za uporabo in označevanje). Dodatek A (informativni) vsebuje seznam večjih tveganj, ki jih zajema ta standard.

General Information

Status
Published
Publication Date
29-Jun-2013
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
20-Nov-2018

Relations

Buy Standard

Standard
EN 16307-5:2013
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vozila za talni transport - Varnostne zahteve in preverjanje - 5. del: Dodatne zahteve za vozila, ki jih poganja pešecFlurförderzeuge - Sicherheitstechnische Anforderungen und Verifizierung - Teil 5: Zusätzliche Anforderungen für Füßgängergeführte FlurförderzeugeChariots de manutention - Exigences de sécurité et vérification - Partie 5: Exigences supplémentaires pour les chariots à conducteur accompagnantIndustrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks53.060Industrijski tovornjakiIndustrial trucksICS:Ta slovenski standard je istoveten z:EN 16307-5:2013SIST EN 16307-5:2013en,fr,de01-junij-2013SIST EN 16307-5:2013SLOVENSKI

STANDARD
SIST EN 16307-5:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16307-5
March 2013 ICS 53.060 English Version

Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks

Chariots de manutention - Exigences de sécurité et vérification - Partie 5: Exigences supplémentaires pour les chariots à conducteur accompagnant

Flurförderzeuge - Sicherheitstechnische Anforderungen und Verifizierung - Teil 5: Zusätzliche Anforderungen für mitgängerbetriebene Flurförderzeuge This European Standard was approved by CEN on 10 February 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,

B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16307-5:2013: ESIST EN 16307-5:2013

EN 16307-5:2013 (E) 2 Contents Page Foreword ..............................................................................................................................................................3 0 Introduction ............................................................................................................................................4 0.1 General ....................................................................................................................................................4 0.2 Assessment of hazards .........................................................................................................................4 1 Scope ......................................................................................................................................................5 2 Normative references ............................................................................................................................5 3 Terms and definitions ...........................................................................................................................5 4 Safety requirements and/or protective measures ..............................................................................6 4.1 General ....................................................................................................................................................6 4.2 Protection against crushing, shearing and trapping .........................................................................6 4.2.1 General ....................................................................................................................................................6 4.2.2 Pedestrian-propelled trucks with mast ...............................................................................................6 4.3 Electrical requirements .........................................................................................................................6 4.4 Electromagnetic compatibility (EMC) ..................................................................................................6 4.5 Operation in potentially explosive atmospheres ................................................................................6 5 Verification of safety requirements and/or protective measures .....................................................6 6 Information for use ................................................................................................................................6 6.1 Instruction handbook(s) - Operation of truck .....................................................................................6 6.2 Marking – Information plates ................................................................................................................7 Annex A (informative)

List of significant hazards ............................................................................................8 Annex ZA (informative)

Relationship between this European Standard and the Essential Requirements of EC Directive 2006/42/EC ....................................................................................... 10 Bibliography ..................................................................................................................................................... 11

SIST EN 16307-5:2013

EN 16307-5:2013 (E) 3 Foreword This document (EN 16307-5:2013) has been prepared by Technical Committee CEN/TC 150 “Industrial trucks - Safety”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2013,and conflicting national standards shall be withdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. EN 16307, Industrial trucks — Safety requirements and verification, consists of the following parts:  Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks  Part 2: Supplementary requirements for self-propelled variable-reach trucks  Part 3: Supplementary requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads  Part 4: Supplementary requirements for driverless industrial trucks and their systems  Part 5: Supplementary requirements for pedestrian-propelled trucks  Part 6: Supplementary requirements for burden and personnel carriers This document is based on ISO/TS 3691-7, Industrial trucks  Safety requirements and verification  Part 7: Regional requirements for countries within the European Community, and is limited to pedestrian-propelled industrial trucks. This document is to be used with EN ISO 3691-5, Industrial trucks — Safety requirements and verification — Part 5: Pedestrian-propelled trucks (ISO 3691-5). According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 16307-5:2013

EN 16307-5:2013 (E) 4 0 Introduction 0.1 General This document is a type-C standard as stated in EN ISO 12100.

The machines concerned and the extent to which hazards, hazardous situations or hazardous events are covered are indicated in the Scope of this document.

When requirements of this type-C standard are different from those which are stated in type-A or type-B standards, the requirements of this type-C standard take precedence over the requirements of the other standards for machines that have been designed and built according to the requirements of this type-C standard.

The EN 16307 series of standards covers safety requirements and their verification for industrial trucks, as defined in ISO 5053, that are not covered exhaustively by the EN ISO 3691 series.

0.2 Assessment of hazards The product needs to be designed in such a way that it is fit for its purpose or function and can be adjusted and maintained without putting persons at risk when used under the conditions foreseen by the manufacturer.

In order to properly design a product and to cover all specific safety requirements, the manufacturer will have to identify the hazards that apply to his product and carry out a ris

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.