iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 24534-1:2010

(Main)

Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 1: Architecture (ISO 24534-1:2010)

Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 1: Architecture (ISO 24534-1:2010)

ISO 24534-1:2010 provides requirements for electronic registration identification (ERI) that are based on an identifier assigned to a vehicle (e.g. for recognition by national authorities), suitable to be used for:
electronic identification of local and foreign vehicles by national authorities;
vehicle manufacturing, in-life maintenance and end-of-life identification (vehicle life cycle management);
adaptation of vehicle data (e.g. for international resales);
safety-related purposes;
crime reduction;
commercial services.
It adheres to privacy and data protection regulations.
ISO 24534-1:2010 provides an overview of the ERI system concept, in terms of the onboard vehicle components and the external off-vehicle components required for an operational system. The detailed requirements are defined in Parts 2, 3, 4 and 5 of ISO 24534 and more limited, though relevant, provisions are defined in ISO 24535.

Straßenverkehrstelematik (RTTT) - Automatische Identifizierung von Fahrzeugen und Ausrüstungen - Elektronische Identifizierung für die Registrierung (ERI) - Teil 1: Architektur (ISO 24534-1:2010)

Identification automatique des véhicules et des équipements - Identification d'enregistrement électronique (ERI) pour les véhicules - Partie 1: Architecture (ISO 24534-1:2010)

L'ISO 24534-1:2010 fournit les exigences pour une identification d'enregistrement électronique (ERI) s'appuyant sur un identifiant attribué à un véhicule (par exemple, pour la reconnaissance par les autorités nationales), adapté à l'identification électronique des véhicules locaux et étrangers par les autorités nationales; à l'identification pendant la fabrication, la maintenance et la fin de vie des véhicules (gestion du cycle de vie des véhicules); à l'adaptation des données des véhicules (par exemple, pour les reventes à l'étranger); aux besoins de la sécurité; à la réduction des délits; etaux services commerciaux.
Elle respecte les réglementations concernant le respect de la vie privée et la protection des données.
Elle présente une vue d'ensemble du concept du système ERI, en ce qui concerne les composants embarqués et les composants extérieurs aux véhicules nécessaires à un système fonctionnel. Les exigences détaillées sont définies dans les Parties 2, 3, 4 et 5 de l'ISO 24534 et, pour les dispositions plus restreintes, mais pertinentes, dans l'ISO 24535.

Avtomatična identifikacija vozil in opreme - Elektronska identifikacija registracije (ERI) za vozila - 1. del: Arhitektura (ISO 24534-1:2010)

Ta del standarda ISO/TS 24534 določa zahteve za elektronsko registracijo, ki temelji na oznaki, dodeljeni vozilu (npr. za prepoznavanje s strani nacionalnih organov), in se uporablja za: – elektronsko identifikacijo lokalnih in tujih vozil s strani nacionalnih organov; – proizvodnjo vozil, vzdrževanje v času življenjske dobe in identifikacijo ob koncu življenjske dobe (upravljanje življenjskega kroga vozila); – prilagajanje podatkov o vozilu (npr. za mednarodno poprodajo); – varnostne namene; – zmanjšanje kriminala in – komercialne storitve. Upošteva predpise o varovanju zasebnosti in osebnih podatkov. Ta del standarda ISO/TS 24534 zagotavlja pregled koncepta sistema elektronske identifikacije registracije (ERI) glede komponent v vozilu in zunanjih komponent zunaj vozila, ki so potrebne za delovanje sistema. Podrobne zahteve so določene v 2., 3., 4. in 5. delu standarda ISO 24534, bolj omejene, posebne določbe pa v standardu ISO 24535.

General Information

Status
Published
Publication Date
14-Jul-2010
Withdrawal Date
30-Jan-2011
ICS
03.220.20 - Road transport
35.240.60 - IT applications in transport
43.020 - Road vehicles in general
Technical Committee
CEN/TC 278 - Road transport and traffic telematics
Drafting Committee
CEN/TC 278/WG 12 - Automatic Vehicle Identification and Automatic Equipment Identification (AVI/AEI)
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
15-Jul-2010
Due Date
09-Apr-2011
Completion Date
15-Jul-2010
Mandate
M/338 - Standardisation mandate to CEN, CENELEC and ETSI in support of interoperabilty of electonic road toll systems in the community
Ref Project
SIST EN ISO 24534-1:2012 - Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 1: Architecture (ISO 24534-1:2010)

Relations

Replaces
CEN ISO/TS 24534-1:2007 - Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 1: Architecture (ISO/TS 24534-1:2007)
Effective Date
17-Jul-2010

Buy Standard

EN ISO 24534-1:2012EN ISO 24534-1:2012
PreviousNext
Standard
EN ISO 24534-1:2012
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 24534-1:2012
01-junij-2012
1DGRPHãþD
SIST-TS CEN ISO/TS 24534-1:2008
$YWRPDWLþQDLGHQWLILNDFLMDYR]LOLQRSUHPH(OHNWURQVNDLGHQWLILNDFLMDUHJLVWUDFLMH
(5, ]DYR]LODGHO$UKLWHNWXUD ,62
Automatic vehicle and equipment identification - Electronic Registration Identification
(ERI) for vehicles - Part 1: Architecture (ISO 24534-1:2010)
Identification automatique des véhicules et des équipements - Identification
d'enregistrement électronique (ERI) pour les véhicules - Partie 1: Architecture (ISO
24534-1:2010)
Ta slovenski standard je istoveten z: EN ISO 24534-1:2010
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
transportu in trgovini and trade
SIST EN ISO 24534-1:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 24534-1:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 24534-1:2012


EUROPEAN STANDARD
EN ISO 24534-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2010
ICS 35.240.60; 03.220.20 Supersedes CEN ISO/TS 24534-1:2007
English Version
Automatic vehicle and equipment identification - Electronic
Registration Identification (ERI) for vehicles - Part 1:
Architecture (ISO 24534-1:2010)
Identification automatique des véhicules et des
équipements - Identification d'enregistrement électronique
(ERI) pour les véhicules - Partie 1: Architecture (ISO
24534-1:2010)
This European Standard was approved by CEN on 16 June 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24534-1:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 24534-1:2012
EN ISO 24534-1:2010 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 24534-1:2012
EN ISO 24534-1:2010 (E)
Foreword
This document (EN ISO 24534-1:2010) has been prepared by Technical Committee CEN/TC 278 “Road
transport and traffic telematics”, the secretariat of which is held by NEN, in collaboration with Technical
Committee ISO/TC 204 "Intelligent transport systems".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2011, and conflicting national standards shall be withdrawn at
the latest by January 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TS 24534-1:2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 24534-1:2010 has been approved by CEN as a EN ISO 24534-1:2010 without any
modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 24534-1:2012

---------------------- Page: 6 ----------------------

SIST EN ISO 24534-1:2012

INTERNATIONAL ISO
STANDARD 24534-1
Firs
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 24534-3:2016(Main)
Intelligent transport systems - Automatic vehicle and equipment identification - Electronic registration identification (ERI) for vehicles - Part 3: Vehicle data (ISO 24534-3:2016)
SIST EN ISO 24534-3:2016

ISO 24534-3:2016 provides the requirements for an electronic registration identification (ERI) that is based on an identifier assigned to a vehicle (e.g. for recognition by national authorities) suitable to be used for the following:
-      electronic identification of local and foreign vehicles by national authorities;
-      vehicle manufacturing, in-life-maintenance, and end-of-life identification (vehicle life cycle management);
-      adaptation of vehicle data, e.g. in case of international re-sales;
-      safety-related purposes;
-      crime reduction;
-      commercial services;
-      adhering to privacy and data protection regulations.
ISO 24534-3:2016 defines the vehicle identification data. This data is called the ERI data and includes the following:
-      the vehicle identifier;
-      possible additional vehicle-related information (as typically included in a vehicle registration certificate).
All additional vehicle data elements are defined as optional. It is left to local legislation and/or the discretion of a registration authority to use or not to use a particular data element. If used, the value is assumed to be the one registered by the registration authority in accordance with local legislation. This part of ISO 24534 only provides the syntax for all these data elements.
NOTE          The secure application layer interfaces for the exchange of ERI data with an ERI reader or writer are specified in ISO 24534‑4 and in ISO 24534‑5.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 24534-4:2010(Main)
Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 4: Secure communications using asymmetrical techniques (ISO 24534-4:2010)
SIST EN ISO 24534-4:2010

ISO 24534-4:2010 provides requirements for electronic registration identification (ERI) that are based on an identifier assigned to a vehicle (e.g. for recognition by national authorities) suitable to be used for:
electronic identification of local and foreign vehicles by national authorities;
vehicle manufacturing, in-life maintenance and end-of-life identification (vehicle life cycle management);
adaptation of vehicle data (e.g. for international resales);
safety-related purposes;
crime reduction;
commercial services.
It adheres to privacy and data protection regulations.
ISO 24534-4:2010 specifies the interfaces for a secure exchange of data between an ERT and an ERI reader or ERI writer in or outside the vehicle using asymmetric encryption techniques.
ISO 24534-4:2010 includes:
the application layer interface between an ERT and an onboard ERI reader or writer;
the application layer interface between the onboard ERI equipment and external ERI readers and writers;
security issues related to the communication with the ERT.

  • Standard
    102 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 24534-2:2010(Main)
Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 2: Operational requirements (ISO 24534-2:2010)
SIST EN ISO 24534-2:2010

ISO 24534-2:2010 provides requirements for electronic registration identification (ERI) that are based on an identifier assigned to a vehicle (e.g. for recognition by national authorities) suitable to be used for:
electronic identification of local and foreign vehicles by national authorities;
vehicle manufacturing, in-life maintenance and end-of-life identification (vehicle life cycle management);
adaptation of vehicle data (e.g. for international resales);
safety-related purposes;
crime reduction;
commercial services.
It adheres to privacy and data protection regulations.
ISO 24534-2:2010 defines the operational requirements for the remaining parts of ISO 24534 and the more limited but relevant provisions of ISO 24535.
Whilst the definition of the organizational framework required to implement, operate and maintain an ERI system is outside the scope of ISO 24534-2:2010, a list of potential stakeholders in the public and private sector has been included.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 24534-3:2016(Main)
Intelligent transport systems - Automatic vehicle and equipment identification - Electronic registration identification (ERI) for vehicles - Part 3: Vehicle data (ISO 24534-3:2016)
SIST EN ISO 24534-3:2016

ISO 24534-3:2016 provides the requirements for an electronic registration identification (ERI) that is based on an identifier assigned to a vehicle (e.g. for recognition by national authorities) suitable to be used for the following:
-      electronic identification of local and foreign vehicles by national authorities;
-      vehicle manufacturing, in-life-maintenance, and end-of-life identification (vehicle life cycle management);
-      adaptation of vehicle data, e.g. in case of international re-sales;
-      safety-related purposes;
-      crime reduction;
-      commercial services;
-      adhering to privacy and data protection regulations.
ISO 24534-3:2016 defines the vehicle identification data. This data is called the ERI data and includes the following:
-      the vehicle identifier;
-      possible additional vehicle-related information (as typically included in a vehicle registration certificate).
All additional vehicle data elements are defined as optional. It is left to local legislation and/or the discretion of a registration authority to use or not to use a particular data element. If used, the value is assumed to be the one registered by the registration authority in accordance with local legislation. This part of ISO 24534 only provides the syntax for all these data elements.
NOTE          The secure application layer interfaces for the exchange of ERI data with an ERI reader or writer are specified in ISO 24534‑4 and in ISO 24534‑5.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 24534-4:2010(Main)
Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 4: Secure communications using asymmetrical techniques (ISO 24534-4:2010)
SIST EN ISO 24534-4:2010

ISO 24534-4:2010 provides requirements for electronic registration identification (ERI) that are based on an identifier assigned to a vehicle (e.g. for recognition by national authorities) suitable to be used for:
electronic identification of local and foreign vehicles by national authorities;
vehicle manufacturing, in-life maintenance and end-of-life identification (vehicle life cycle management);
adaptation of vehicle data (e.g. for international resales);
safety-related purposes;
crime reduction;
commercial services.
It adheres to privacy and data protection regulations.
ISO 24534-4:2010 specifies the interfaces for a secure exchange of data between an ERT and an ERI reader or ERI writer in or outside the vehicle using asymmetric encryption techniques.
ISO 24534-4:2010 includes:
the application layer interface between an ERT and an onboard ERI reader or writer;
the application layer interface between the onboard ERI equipment and external ERI readers and writers;
security issues related to the communication with the ERT.

  • Standard
    102 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 24534-2:2010(Main)
Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 2: Operational requirements (ISO 24534-2:2010)
SIST EN ISO 24534-2:2010

ISO 24534-2:2010 provides requirements for electronic registration identification (ERI) that are based on an identifier assigned to a vehicle (e.g. for recognition by national authorities) suitable to be used for:
electronic identification of local and foreign vehicles by national authorities;
vehicle manufacturing, in-life maintenance and end-of-life identification (vehicle life cycle management);
adaptation of vehicle data (e.g. for international resales);
safety-related purposes;
crime reduction;
commercial services.
It adheres to privacy and data protection regulations.
ISO 24534-2:2010 defines the operational requirements for the remaining parts of ISO 24534 and the more limited but relevant provisions of ISO 24535.
Whilst the definition of the organizational framework required to implement, operate and maintain an ERI system is outside the scope of ISO 24534-2:2010, a list of potential stakeholders in the public and private sector has been included.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17015-1:2024(Main)
Electronic Public Procurement - Catalogue - Part 1: Choreographies
kSIST FprEN 17015-1:2024

The purpose of this deliverable is to specify and describe choreographies for exchanging an electronic product catalogue (“catalogues”) as part of the business processes in the pre-award and post-award area, so that catalogues can serve as a basis for placing orders as well as evaluating tenders. The key aspects covered by this choreography specification are:
-   processes for submitting catalogues from the selling to the buying side;
-   processes for submitting catalogue-related data as part of a tendering process;
-   processes integrating sell-side procurement systems.
This document does not apply to the transactions used in the specified choreographies. These transactions are specified in EN 17015 2. The relationship between the choreographies and the transaction is described in Clause 8.
The identifier of this choreographies document is EN 17015 1:2024.
How to claim compliance to this choreography is specified in 6.2.3.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52927:2024(Main)
Additive manufacturing - General principles - Main characteristics and corresponding test methods (ISO/ASTM 52927:2024)
kSIST FprEN ISO/ASTM 52927:2024

This document specifies the principal requirements applied to the testing of parts produced by additive manufacturing processes.
This document
—     identifies quality characteristics for feedstock and parts and the corresponding test procedures,
—     provides the specific procedures to build specimens using additive manufacturing process, and
—     recommends the scope and content of test and supply agreements.
This document is aimed at machine manufacturers, feedstock suppliers, AM system users, part providers, and customers to facilitate the communication on main quality characteristics. It applies wherever additive manufacturing processes are used.
NOTE            It is the intent to include, in future versions of this document, other characteristics such as thermal properties, electrical requirements and physical and physico-chemical properties based upon material types.

  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8362-2:2024(Main)
Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2024)
SIST EN ISO 8362-2:2024

This document specifies the shape, dimensions, material, performance requirements and labelling of closures for injection vials covered by ISO 8362-1 and ISO 8362-4.
The dimensional requirements are not applicable to barrier-coated closures.
Closures specified in this document are intended for single use only.
NOTE            The potency, purity, stability and safety of a medicinal product during its manufacture and storage can strongly be affected by the nature and performance of the primary packaging.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day