EN ISO 12947-2:2016

Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO 12947-2:2016)

ISO 12947-2:2016 specifies the procedure for the determination of specimen breakdown (end-point of test) by inspection at fixed intervals and is applicable to all textile fabrics including nonwovens apart from fabrics where the specifier indicates the end performance as having a low abrasion wear life.
It is not applicable to coated fabrics (including laminated fabrics). If the abrasion behaviour of the coated surface of a coated fabric is to be determined, use the methods described in the various parts of ISO 5470.

Textilien - Bestimmung der Scheuerbeständigkeit von textilen Flächengebilden mit dem Martindale-Verfahren - Teil 2: Bestimmung der Probenzerstörung (ISO 12947-2:2016)

Dieses Dokument legt das Verfahren für die Bestimmung der Probenzerstörung (Endpunkt der Prüfung) durch Untersuchung nach festgelegten Intervallen fest, wobei dieses Verfahren auf Proben aus allen textilen Flächengebilden einschließlich Vliesstoff anwendbar ist, ausgenommen sind jedoch die textilen Flächengebilde, für die deklariert wurde, dass sie nur bei geringer Scheuerbeanspruchung eingesetzt werden.
Dieses Dokument ist nicht auf beschichtete Flächengebilde anwendbar (einschließlich laminierten Flächen). Wenn das Abriebsverhalten der beschichteten Oberfläche eines beschichteten Flächengebildes bestimmt werden soll, sind die in den verschiedenen Teilen der ISO 5470 beschriebenen Verfahren anzuwenden.

Textiles - Détermination de la résistance à l'abrasion des étoffes par la méthode Martindale - Partie 2: Détermination de la détérioration de l'éprouvette (ISO 12947-2:2016)

L'ISO 12947-2 :2016 spécifie le mode opératoire à suivre pour déterminer la détérioration d'une éprouvette (point d'arrêt d'essai) par un contrôle à intervalles fixes. Elle s'applique à toutes les étoffes de textile y compris les nontissés, à l'exception des étoffes pour lesquelles le spécificateur indique une performance finale correspondant à une faible résistance à l'abrasion.
Elle ne s'applique pas aux supports textiles revêtus (y compris les étoffes laminées). Si le comportement à l'abrasion de l'enduction d'un support textile revêtu doit être déterminé, utiliser les méthodes décrites dans les différentes parties de l'ISO 5470.

Tekstilije - Ugotavljanje odpornosti tekstilij proti drgnjenju po Martindalovi metodi - 2. del: Ugotavljanje uničenja vzorca (ISO 12947-2:2016)

Ta dokument določa postopek za ugotavljanje uničenja vzorca (končna točka preskusa) s pregledi v fiksnih intervalih in se uporablja za vse tekstilije, vključno z netkanimi materiali, razen za tkanine, pri katerih določitelj označuje končno zmogljivost z nizko življenjsko dobo drgnjenja. Ta dokument se ne uporablja za prevlečene tkanine (vključno z laminiranimi tkaninami). Če je treba določiti obnašanje drgnjenja prevlečene površine prevlečene tkanine, uporabite metode, opisane v različnih delih standarda ISO 5470.

General Information

• Status: Published
• Publication Date: 13-Dec-2016
• Withdrawal Date: 29-Jun-2017
• ICS: 59.080.30 - Textile fabrics
• Technical Committee: CEN/TC 248 - Textiles and textile products
• Drafting Committee: CEN/TC 248 - Textiles and textile products
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 14-Dec-2016
• Completion Date: 14-Dec-2016
• Ref Project: SIST EN ISO 12947-2:2017 - Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO 12947-2:2016)

Relations

• Replaces: EN ISO 12947-2:1998 - Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO 12947-2:1998)
• Effective Date: 08-Jun-2022
• Replaces: EN ISO 12947-2:1998/AC:2006 - Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO 12947-2:1998/Cor.1:2002)
• Effective Date: 21-Dec-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12947-2:2017
01-marec-2017
1DGRPHãþD
SIST EN ISO 12947-2:1999
SIST EN ISO 12947-2:1999/AC:2006
7HNVWLOLMH8JRWDYOMDQMHRGSRUQRVWLWHNVWLOLMSURWLGUJQMHQMXSR0DUWLQGDORYLPHWRGL
GHO8JRWDYOMDQMHXQLþHQMDY]RUFD,62
Textiles - Determination of the abrasion resistance of fabrics by the Martindale method -
Part 2: Determination of specimen breakdown (ISO 12947-2:2016)
Textilien - Bestimmung der Scheuerbeständigkeit von textilen Flächengebilden mit dem
Martindale-Verfahren - Teil 2: Bestimmung der Probenzerstörung (ISO 12947-2:2016)
Textiles - Détermination de la résistance à l'abrasion des étoffes par la méthode
Martindale - Partie 2: Détermination de la détérioration de l'éprouvette (ISO 12947-
2:2016)
Ta slovenski standard je istoveten z: EN ISO 12947-2:2016
ICS:
59.080.30 Tkanine Textile fabrics
SIST EN ISO 12947-2:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 12947-2:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 12947-2:2017


EN ISO 12947-2
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2016
EUROPÄISCHE NORM
ICS 59.080.30 Supersedes EN ISO 12947-2:1998
English Version

Textiles - Determination of the abrasion resistance of
fabrics by the Martindale method - Part 2: Determination
of specimen breakdown (ISO 12947-2:2016)
Textiles - Détermination de la résistance à l'abrasion Textilien - Bestimmung der Scheuerbeständigkeit von
des étoffes par la méthode Martindale - Partie 2: textilen Flächengebilden mit dem Martindale-
Détermination de la détérioration de l'éprouvette (ISO Verfahren - Teil 2: Bestimmung der Probenzerstörung
12947-2:2016) (ISO 12947-2:2016)
This European Standard was approved by CEN on 21 November 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12947-2:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 12947-2:2017
EN ISO 12947-2:2016 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 12947-2:2017
EN ISO 12947-2:2016 (E)
European foreword
This document (EN ISO 12947-2:2016) has been prepared by Technical Committee ISO/TC 38
"Textiles" in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be
withdrawn at the latest by June 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 12947-2:1998.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United
...