EN 16285:2013
(Main)Packaging - Flexible aluminium tubes - Test method to measure the deformation of the aluminium tube body (Guillotine test)
Packaging - Flexible aluminium tubes - Test method to measure the deformation of the aluminium tube body (Guillotine test)
This European Standard specifies a method to measure the deformation of the aluminium tube body.
It is applicable to cylindrical aluminium tubes used for packing pharmaceutical, cosmetic, hygiene, food and other domestic and industrial products.
Packmittel - Aluminiumtuben - Prüfverfahren zur Messung der Verformung des Mantels von Aluminiumtuben (Guillotine-Prüfung)
Diese Europäische Norm legt ein Verfahren zur Messung der Verformung des Mantels von Aluminiumtuben fest.
Sie gilt für zylindrische Aluminiumtuben zum Verpacken von Produkten der Pharmazie, der Kosmetik, der Hygiene sowie von Lebensmitteln und anderen Haushalts- und Industrieprodukten.
Emballage - Tubes souples en aluminium - Méthode d'essai pour mesurer la déformation du corps du tube en aluminium (test Guillotine)
La présente Norme européenne spécifie une méthode pour mesurer la déformation du corps d'un tube en aluminium.
Elle s'applique aux tubes en aluminium utilisés pour l'emballage des produits pharmaceutiques, cosmétiques, hygiéniques, alimentaires et autres produits domestiques et industriels.
Embalaža - Prožne aluminijaste tube - Preskusne metode za merjenje deformacije telesa aluminijaste tube (preskus z giljotino)
Ta standard določa metodo za merjenje deformacije telesa aluminijaste tube. Uporablja se za prožne aluminijaste tube, namenjene pakiranju farmacevtskih, kozmetičnih, higienskih, prehrambenih ter drugih gospodinjskih in industrijskih izdelkov.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Embalaža - Prožne aluminijaste tube - Preskusne metode za merjenje deformacije telesa aluminijaste tube (preskus z giljotino)Packmittel - Aluminiumtuben - Prüfverfahren zur Messung der Verformung des Mantels von Aluminiumtuben (Guillotine-Prüfung)Emballage - Tubes souples en aluminium - Méthode d'essai pour mesurer la déformation du corps du tube en aluminium (test Guillotine)Packaging - Flexible aluminium tubes - Test method to measure the deformation of the aluminium tube body (Guillotine test)77.150.10Aluminijski izdelkiAluminium products55.120Cans. Tins. TubesICS:Ta slovenski standard je istoveten z:EN 16285:2013SIST EN 16285:2013en,fr,de01-maj-2013SIST EN 16285:2013SLOVENSKI
STANDARD
SIST EN 16285:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16285
February 2013 ICS 55.120 English Version
Packaging - Flexible aluminium tubes - Test method to measure the deformation of the aluminium tube body (Guillotine test)
Emballage - Tubes souples en aluminium - Méthode d'essai pour mesurer la déformation du corps du tube en aluminium (essai Guillotine)
Packmittel - Aluminiumtuben - Prüfverfahren zur Messung der Verformung des Mantels von Aluminiumtuben (Guillotine-Prüfung) This European Standard was approved by CEN on 21 December 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16285:2013: ESIST EN 16285:2013
EN 16285:2013 (E) 2 Contents Page Foreword . 3 1Scope . 42Testing equipment . 43Requirements . 54Execution . 55Test report . 6
SIST EN 16285:2013
EN 16285:2013 (E) 3 Foreword This document (EN 16285:2013) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2013, and conflicting national standards shall be withdrawn at the latest by August 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 16285:2013
EN 16285:2013 (E) 4 1 Scope This European Standard specif
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.