EN ISO 16147:2018

Small craft - Inboard diesel engines - Engine-mounted fuel, oil and electrical components (ISO 16147:2018)

This document establishes requirements for the design and installation of engine-mounted fuel, oil and electrical components on diesel inboard-mounted engines for minimizing fuel leakage, risk of electric shock and the risk of and/or the spread of fire on small craft of hull length up to 24 m.

Kleine Wasserfahrzeuge - Eingebaute Dieselmotoren - Am Motor befestigte Kraftstoff-, Öl- und Elektrikbauteile (ISO 16147:2018)

Dieses Dokument legt Anforderungen für Konstruktion und Montage von am Motor befestigten Kraftstoff-, Öl- und Elektrikbauteile von Innenbord Dieselmotoren fest, um die Leckage von Kraftstoff, das Risiko eines Stromschlags und das Risiko und/oder die Ausbreitung eines Feuers auf kleinen Wasserfahrzeugen bis zu einer Rumpflänge von 24 m zu minimieren.

Petits navires - Moteurs intérieurs diesels - Éléments des circuits d'alimentation, des systèmes de lubrification et des systèmes électriques fixés sur le moteur (ISO 16147:2018)

Le présent document spécifie les exigences relatives à la conception et à la pose des éléments des circuits d'alimentation, des systèmes de lubrification et des systèmes électriques fixés sur des moteurs intérieurs diesels, afin de réduire le plus possible les fuites de carburant, les risques de choc électrique et les risques d'incendie et/ou la propagation du feu sur les petits navires d'une longueur de coque maximale de 24 m.

Mala plovila - Vgrajeni dizelski motorji - Nameščene komponente za gorivo, olje in elektriko (ISO 16147:2018)

Ta dokument določa zahteve za načrtovanje in namestitev komponent za gorivo, olje in elektriko, nameščenih v vgrajenih dizelskih motorjih, za zmanjševanje uhajanja goriva, tveganja za električni udar, tveganja za požar in/ali širjenje požara na malih plovilih z dolžino trupa do 24 m.

General Information

• Status: Withdrawn
• Publication Date: 12-Jun-2018
• Withdrawal Date: 26-Jan-2021
• ICS: 47.020.20 - Marine engines and propulsion systems
• ICS: 47.080 - Small craft
• Technical Committee: CEN/SS T01 - Shipbuilding and maritime structures
• Drafting Committee: CEN/SS T01 - Shipbuilding and maritime structures
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 27-Jan-2021
• Directive: 2003/44/EC - Approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft
• Directive: 2013/53/EU - Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC
• Directive: 94/25/EC - Directive 94/25/EC of the European Parliament and of the Council of 16 June 1994 on the approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft
• Mandate: M/075 - Revised mandate to CEN for standardization in the field of recreational craft
• Mandate: M/542 - [C(2015)8736] Standardisation Request to the European Committee for Standardisation and the European Committee for Electro-technical Standardisation as regards recreational craft and personal watercraft in support of Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC.
• Ref Project: SIST EN ISO 16147:2018 - Small craft - Inboard diesel engines - Engine-mounted fuel, oil and electrical components (ISO 16147:2018)

Relations

• Replaces: EN ISO 16147:2017 - Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components (ISO 16147:2002, including Amd 1:2013)
• Effective Date: 15-Jun-2016
• Replaced By: EN ISO 16147:2021 - Small craft - Inboard diesel engines - Engine-mounted fuel, oil and electrical components (ISO 16147:2020)
• Effective Date: 01-Apr-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 16147:2018
01-september-2018
1DGRPHãþD
SIST EN ISO 16147:2017
0DODSORYLOD9JUDMHQLGL]HOVNLPRWRUML1DPHãþHQHNRPSRQHQWH]DJRULYRROMHLQ
HOHNWULNR,62
Small craft - Inboard diesel engines - Engine-mounted fuel, oil and electrical components
(ISO 16147:2018)
Kleine Wasserfahrzeuge - Eingebaute Dieselmotoren - Am Motor befestigte Kraftstoff-,
Öl- und Elektrikbauteile (ISO 16147:2018)
Petits navires - Moteurs intérieurs diesels - Éléments des circuits d'alimentation et des
systèmes électriques fixés sur le moteur (ISO 16147:2018)
Ta slovenski standard je istoveten z: EN ISO 16147:2018
ICS:
47.020.20 Ladijski motorji Marine engines and
propulsion systems
47.080 ýROQL Small craft
SIST EN ISO 16147:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 16147:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 16147:2018


EN ISO 16147
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2018
EUROPÄISCHE NORM
ICS 47.080 Supersedes EN ISO 16147:2017
English Version

Small craft - Inboard diesel engines - Engine-mounted fuel,
oil and electrical components (ISO 16147:2018)
Petits navires - Moteurs intérieurs diesels - Éléments Kleine Wasserfahrzeuge - Eingebaute Dieselmotoren -
des circuits d'alimentation, des systèmes de Am Motor befestigte Kraftstoff-, Öl- und
lubrification et des systèmes électriques fixés sur le Elektrikbauteile (ISO 16147:2018)
moteur (ISO 16147:2018)
This European Standard was approved by CEN on 2 April 2018.

This European Standard was corrected and reissued by the CEN-CENELEC Management Centre on 18 July 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

E U R O P Ä I SC H E S KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16147:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 16147:2018
EN ISO 16147:2018 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of Directive 2013/53/EU aimed to be covered . 4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 16147:2018
EN ISO 16147:2018 (E)
European foreword
This document (EN ISO 16147:2018) has been prepared by Technical Committee ISO/TC 188 "Small
craft" in collaboration with CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2018, and conflicting national standards
shall be withdrawn at the latest by December 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 16147:2017.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and t
...