EN 492:2012

Fibre-cement slates and fittings - Product specification and test methods

This European Standard specifies the technical requirements and establishes methods of control and test as well as acceptance conditions for fibre-cement slates and their fibre-cement fittings for one or more of the following uses:
-   roofing;
-   internal wall finishes;
-   external wall and ceiling finishes.
This European Standard applies to fibre-cement slates with a height dimension h (see Clause 4) not exceeding 850 mm for overlapping assembly. For the purpose of this European Standard, fibre-cement slates have been classified according to their bending moment.
This European Standard covers fibre-cement slates reinforced with fibres of different types as specified in 5.1.1.
This European Standard does not include calculations with regard to works, design requirements, installation techniques, wind uplift or rain proofing of the installed products.

Faserzement-Dachplatten und dazugehörige Formteile - Produktspezifikation und Prüfverfahren

Dieses Dokument legt die technischen Anforderungen an und die Verfahren zur Kontrolle und Prüfung sowie die Abnahmebedingungen für Faserzement Dachplatten und dazugehörige Faserzement-Formteile für einen oder mehrere der folgenden Verwendungszwecke fest:
   Dachdeckungen;
   Innenwandbekleidungen;
   Außenwand  und Deckenbekleidungen.
Diese Europäische Norm gilt für Faserzement Dachplatten bis zu einer maximalen Höhe h von 850 mm (siehe Abschnitt 4) für eine überlappende Verlegung. Für die Anwendung dieser Norm werden Faserzement Dachplatten nach ihrem Biegemoment klassifiziert.
Dieses Dokument erstreckt sich auf Faserzement Dachplatten, die mit Fasern unterschiedlicher Art, wie in 5.1.1 festgelegt, bewehrt sind.
Diese Norm enthält keine Berechnungen zu Bauleistungen, Anforderungen an die Ausführung, Verlegever-fahren, Windsogsicherheit oder Regensicherheit der verlegten Produkte.

Ardoises en fibres-ciment et leurs accessoires en fibres-ciment - Spécification du produit et méthodes d'essai

La présente Norme européenne spécifie les exigences techniques et établit les méthodes de contrôle et d'essai ainsi que les conditions de réception des ardoises en fibres-ciment et de leurs accessoires en fibres-ciment utilisés pour un ou plusieurs des usages suivants :
-   la toiture ;
-   la finition des murs intérieurs ;
-   les revêtements extérieurs pour murs et plafonds.
Il s'applique aux ardoises en fibres-ciment dont la hauteur h (voir Article 4) ne dépasse pas 850 mm pour une pose avec recouvrement. Pour les besoins de la présente Norme européenne, les ardoises en fibres-ciment ont été classées en fonction de leur moment de flexion.
La présente Norme européenne s'applique aux ardoises en fibres-ciment renforcées à l'aide de fibres de types différents, comme spécifié en 5.1.1.
La présente Norme européenne n'inclut pas les calculs relatifs aux travaux, aux exigences de conception, aux techniques de pose, aux soulèvements par le vent ou à l'étanchéité à la pluie des produits déjà posés.

Vlaknato-cementne strešne plošče in fazonski kosi - Specifikacija za izdelek in preskusne metode

Ta dokument določa tehnične zahteve in metode za nadzor ter preskusne metode in pogoje za sprejem za vlaknato-cementne strešne plošče ter njihove vlaknato-cementne fazonske kose za eno ali več navedenih vrst uporabe: – prekrivanje streh; – zaključke notranjih sten; – zaključke zunanjih sten in stropov.

General Information

• Status: Withdrawn
• Publication Date: 09-Oct-2012
• Withdrawal Date: 05-Jul-2016
• ICS: 91.100.40 - Products in fibre-reinforced cement
• Technical Committee: CEN/TC 128 - Roof covering products for discontinuous laying and products for wall cladding
• Drafting Committee: CEN/TC 128/SC 4 - Fibre cement products for roofing
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 06-Jul-2016
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/121 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on internal and external wall and ceiling finishes
• Mandate: M/122 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on roof coverings, rooflights, roof windows and ancillary products
• Ref Project: SIST EN 492:2013 - Fibre-cement slates and fittings - Product specification and test methods

Relations

• Replaces: EN 492:2004/A2:2006 - Fibre-cement slates and fittings - Product specification and test methods
• Effective Date: 17-Oct-2012
• Replaces: EN 492:2004/A1:2005 - Fibre-cement slates and fittings - Product specification and test methods
• Effective Date: 17-Oct-2012
• Replaces: EN 492:2004 - Fibre-cement slates and fittings - Product specification and test methods
• Effective Date: 24-Jul-2010
• Merged Into: EN 492:2012+A1:2016 - Fibre-cement slates and fittings - Product specification and test methods
• Effective Date: 19-Jan-2023
• Amended By: EN 492:2012/FprA1:2015 - Fibre-cement slates and fittings - Product specification and test methods
• Effective Date: 16-Jul-2014

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Faserzement-Dachplatten und dazugehörige Formteile - Produktspezifikation und PrüfverfahrenArdoises en fibres-ciment et leurs accessoires en fibres-ciment - Spécification du produit et méthodes d'essaiFibre-cement slates and fittings - Product specification and test methods91.100.40YODNQLProducts in fibre-reinforced cement91.060.20StreheRoofsICS:Ta slovenski standard je istoveten z:EN 492:2012SIST EN 492:2013en,fr,de01-april-2013SIST EN 492:2013SLOVENSKI
STANDARDSIST EN 492:2005/A2:2006SIST EN 492:2005/A1:2006SIST EN 492:20051DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 492
October 2012 ICS 91.100.40 Supersedes EN 492:2004English Version
Fibre-cement slates and fittings - Product specification and test methods
Ardoises en fibres-ciment et leurs accessoires en fibres-ciment - Spécification du produit et méthodes d'essai
Faserzement-Dachplatten und dazugehörige Formteile - Produktspezifikation und Prüfverfahren This European Standard was approved by CEN on 4 August 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 492:2012: ESIST EN 492:2013

Consignment inspection sampling . 32Annex B (normative)
Statistical method for determining the corresponding wet values or revised dry specifications for the bending moment when carrying out the dry method of test for quality control purposes . 33B.1Procedure . 33B.2Determination of the correlation between the results of testing wet and dry specimens . 33B.3Determination of the regression line . 34B.4Determination of a value for wet testing from an obtained value for dry testing . 34B.5Determination of the minimum value specified for dry testing xstd corresponding to the minimum value specified for wet testing in this standard ystd . 35Annex C (informative)
Examples . 37C.1Examples of dimension h . 37C.2Examples of fibre-cement slates installed showing lines of fixing . 39Annex D (normative)
Requirements of Decision 2001/671/EC regarding the external fire performance of roof coverings expressed following the classes defined in EN 13501-5 . 40Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 41ZA.1Scope and relevant characteristics . 41ZA.2Procedure for the attestation of conformity of fibre cement slates and fittings . 43ZA.2.1Systems of attestation of conformity . 43ZA.2.2EC Declaration of conformity . 45ZA.3CE marking . 47Bibliography . 49 SIST EN 492:2013
...