EN 492:2004

Fibre-cement slates and fittings - Product specification and test methods

This document specifies the technical requirements and establishes methods of control and test as well as acceptance conditions for fibre-cement slates and their fibre-cement fittings for one or more of the following uses:
-   roofing,
-   internal wall finishes,
-   external wall and ceiling finishes.
It applies to fibre-cement slates with a height dimension h (see Clause 4) not exceeding 850 mm for overlapping assembly. For the purpose of this standard, fibre-cement slates have been classified according to their bending moment.
This document covers fibre-cement slates reinforced with fibres of different types as specified in 5.1.1.
This standard does not include calculations with regard to works, design requirements, installation techniques, wind uplift or rain proofing of the installed products.

Faserzement-Dachplatten und dazugehörige Formteile - Produktspezifikation und Prüfverfahren

Diese Norm legt die technischen Anforderungen an und die Verfahren zur Kontrolle und Prüfung sowie die Abnahmebedingungen für Faserzement-Dachplatten und dazugehörige Faserzement-Formteile für einen oder mehrere der folgenden Verwendungszwecke fest:
¾ Bedachungen;
¾ Innenwandverkleidungen;
¾ Außenwand- und Deckenverkleidungen.
Sie gilt für Faserzement-Dachplatten bis zu einer maximale Höhe h von 850 mm (siehe Abschnitt 4) für eine überlappende Verlegung. Für die Anwendung dieser Norm werden Faserzement-Dachplatten nach ihrem Biegemoment klassifiziert.
Diese Norm erstreckt sich auf Faserzement-Dachplatten, die mit Fasern unterschiedlicher Art, wie in 5.1.1 festgelegt, bewehrt sind.
Diese Norm enthält keine Berechnungen zu Bauleistungen, Anforderungen an die Ausführung, Verlege-verfahren, Windsogsicherheit oder Regensicherheit der verlegten Produkte.

Ardoises en fibres-ciment et leurs accessoires en fibres-ciment - Spécification du produit et méthodes d'essai

Le présent document spécifie les exigences techniques et établit les méthodes de contrôle et d�essai ainsi
que les conditions de réception des ardoises en fibres-ciment et de leurs accessoires en fibres-ciment utilisés
pour un ou plusieurs des usages suivants :
- la toiture ,
- la finition des murs intérieurs ,
- la finition des murs extérieurs et des plafonds.
Il s�applique aux ardoises en fibres -ciment dont la hauteur h (voir en 4) ne dépasse pas 850 mm pour une
pose avec recouvrement. Pour les besoins du présent document, les ardoises en fibres-ciment ont été
classées en fonction de leur moment de flexion.
Le présent document s�applique aux ardoises en fibres -ciment renforcées à l�aide de fibres de types
différents, comme spécifié en 5.1.1.
Le présent document n�inclut pas les calculs relatifs aux travaux, aux exigences de conception, aux
techniques de pose, aux soulèvements par le vent ou à l�étanchéité à la pluie des produits déjà posés.

Vlaknato-cementne strešne plošče in fazonski kosi - Specifikacija za izdelek in preskusne metode

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-2004
• Withdrawal Date: 09-Oct-2012
• ICS: 91.100.40 - Products in fibre-reinforced cement
• Technical Committee: CEN/TC 128 - Roof covering products for discontinuous laying and products for wall cladding
• Drafting Committee: CEN/TC 128/SC 4 - Fibre cement products for roofing
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 10-Oct-2012
• Completion Date: 10-Oct-2012
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/121 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on internal and external wall and ceiling finishes
• Mandate: M/122 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on roof coverings, rooflights, roof windows and ancillary products
• Ref Project: SIST EN 492:2005 - Fibre-cement slates and fittings - Product specification and test methods

Relations

• Replaces: EN 492:1994/A1:1999 - Fibre-cement slates and their fittings for roofing - Product specification and test methods
• Effective Date: 22-Dec-2008
• Replaces: EN 492:1994/AC:1995 - Fibre-cement slates and their fittings for roofing - Product specification and test methods
• Effective Date: 22-Dec-2008
• Replaces: EN 492:1994 - Fibre-cement slates and their fittings for roofing - Product specification and test methods
• Effective Date: 22-Dec-2008
• Replaces: EN 492:1994/AC:1996 - Fibre-cement slates and their fittings for roofing - Productspecification and test methods
• Effective Date: 22-Dec-2008
• Replaced By: EN 492:2012 - Fibre-cement slates and fittings - Product specification and test methods
• Effective Date: 24-Jul-2010
• Amended By: EN 492:2004/A2:2006 - Fibre-cement slates and fittings - Product specification and test methods
• Effective Date: 08-Jun-2022
• Amended By: EN 492:2004/A1:2005 - Fibre-cement slates and fittings - Product specification and test methods
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fibre-cement slates and fittings - Product specification and test methodsArdoises en fibres-ciment et leurs accessoires en fibres-ciment - Spécification du produit et méthodes d'essaiFaserzement-Dachplatten und dazugehörige Formteile - Produktspezifikation und PrüfverfahrenTa slovenski standard je istoveten z:EN 492:2004SIST EN 492:2005en91.100.4091.060.20ICS:SIST EN 492:1998/AC:2000SIST EN 492:1998/A1:2000SIST EN 492:19981DGRPHãþDSLOVENSKI
STANDARDSIST EN 492:200501-marec-2005







EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 492
December 2004 ICS 91.100.40
Supersedes EN 492:1994
English version
Fibre-cement slates and fittings - Product specification and test methods
Ardoises en fibres-ciment et leurs accessoires en fibres-ciment - Spécification du produit et méthodes d'essai
Faserzement-Dachplatten und dazugehörige Formteile - Produktspezifikation und Prüfverfahren This European Standard was approved by CEN on 3 March 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 492:2004: E



EN 492:2004 (E) 2 Contents Page Foreword.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Symbols and abbreviations.6 5 Product requirements.7 5.1 General.7 5.1.1 Composition.7 5.1.2 Appearance and finish.7 5.2 Dimensions and tolerance.8 5.2.1 General.8 5.2.2 Thicknesses.8 5.2.3 Tolerances on nominal dimensions.8 5.3 Physical requirements and characteristics for fibre-cement slates.8 5.3.1 General.8 5.3.2 Apparent density.8 5.3.3 Mechanical characteristics.9 5.3.4 Water impermeability.
...