prEN 12976-1
(Main)Thermal solar systems and components - Factory made systems - Part 1: General requirements
Thermal solar systems and components - Factory made systems - Part 1: General requirements
This European Standard specifies requirements on durability, reliability and safety for Factory Made thermal solar heating systems. The standard also includes provisions for evaluation of conformity to these requirements.
The requirements in this standard apply to Factory Made solar systems as products. The installation of these systems itself is not considered, but requirements are given for the documentation for the installer and the user which is delivered with the system (see also 4.6).
Thermische Solaranlagen und ihre Bauteile - Vorgefertigte Anlagen - Teil 1: Allgemeine Anforderungen
Diese Europäische Norm legt Anforderungen hinsichtlich Dauerhaftigkeit, Zuverlässigkeit und Sicherheit für vorgefertigte Solaranlagen fest. Die Norm enthält auch Vorgaben für die Bewertung der Konformität mit diesen Anforderungen. Die Anforderungen in dieser Norm gelten für vorgefertigte Solaranlagen als Produkte. Der Einbau dieser Anlagen wird nicht berücksichtigt, es sind jedoch Anforderungen hinsichtlich der Dokumentation für den Installateur und für den Anwender, der mit diesen Anlagen beliefert wird, angegeben (siehe auch 4.6).
Installations solaires thermiques et leurs composants - Installations préfabriquées en usine - Partie 1 : Exigences générales
La présente Norme européenne spécifie les exigences de durabilité, de fiabilité et de sécurité requises des
installations solaires thermiques de chauffage préfabriquées en usine. Elle contient également des
dispositions relatives à l’évaluation de la conformité à ces exigences.
Les exigences de la présente norme s’appliquent aux installations solaires préfabriquées en usine en tant que
produits. Leur montage n’est pas pris en considération, mais des exigences relatives à la documentation
fournie avec l’installation et à destination de l’installateur et de l’utilisateur sont indiquées (voir également 4.6).
Toplotni sončni sistemi in sestavni deli - Industrijsko izdelani sistemi - 1. del: Splošne zahteve
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 12976-1:2012
01-april-2012
7RSORWQLVRQþQLVLVWHPLLQVHVWDYQLGHOL,QGXVWULMVNRL]GHODQLVLVWHPLGHO
6SORãQH]DKWHYH
Thermal solar systems and components - Factory made systems - Part 1: General
requirements
Thermische Solaranlagen und ihre Bauteile - Vorgefertigte Anlagen - Teil 1: Allgemeine
Anforderungen
Installations solaires thermiques et leurs composants - Installations préfabriquées en
usine - Partie 1 : Exigences générales
Ta slovenski standard je istoveten z: prEN 12976-1
ICS:
27.160 6RQþQDHQHUJLMD Solar energy engineering
oSIST prEN 12976-1:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 12976-1:2012
---------------------- Page: 2 ----------------------
oSIST prEN 12976-1:2012
EUROPEAN STANDARD
DRAFT
prEN 12976-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2012
ICS 27.160 Will supersede EN 12976-1:2006
English Version
Thermal solar systems and components - Factory made
systems - Part 1: General requirements
Installations solaires thermiques et leurs composants - Thermische Solaranlagen und ihre Bauteile - Vorgefertigte
Installations préfabriquées en usine - Partie 1 : Exigences Anlagen - Teil 1: Allgemeine Anforderungen
générales
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 312.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12976-1:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 12976-1:2012
prEN 12976-1:2012 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .6
2 Normative references .6
3 Terms and definitions .7
4 Requirements .7
4.1 General .7
4.1.1 Safety .7
4.1.2 Suitability for drinking water .7
4.1.3 Water contamination .7
4.1.4 Freeze resistance .8
4.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.