Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012)

ISO 11148-6:2012 applies to hand-held non-electric power tools (hereinafter "assembly power tools for threaded fasteners") intended for tightening or installing of threaded fasteners. The assembly power tools for threaded fasteners can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended for use by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-6:2012 covers air-hydraulic impulse wrenches, impact wrenches, fastener installation tools, nutrunners, open-ended spanners (crow-foot with open-ended socket or tube nut wrench), ratchet wrenches and screwdrivers.
ISO 11148-6:2012 does not cover special requirements and modifications of assembly power tools for threaded fasteners for the purpose of mounting them in fixtures.
ISO 11148-6:2012 deals with all significant hazards, hazardous situations or hazardous events when the tools are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of assembly power tools for threaded fasteners in potentially explosive atmospheres.

Handgehaltene nicht elektrisch betriebene Maschinen - Sicherheitsanforderungen - Teil 6: Maschinen für Schraubverbindungen (ISO 11148-6:2012)

Der vorliegende Teil von ISO 11148 gilt für handgehaltene nicht elektrisch betriebene Maschinen (im Folgenden als Maschinen für Schraubverbindungen bezeichnet), zum Anziehen oder Einsetzen von Befestigungselementen mit Gewinde. Die Maschinen für Schraubverbindungen können von Druckluft, Hydraulikflüssigkeit oder einem Verbrennungsmotor angetrieben werden, sind zum Gebrauch durch einen einzelnen Bediener vorgesehen und werden vom Bediener in seiner Hand oder seinen Händen gehalten, mit oder ohne eine Aufhängung, z. B. eine Ausgleichseinrichtung.
Der vorliegende Teil von ISO 11148 ist anwendbar auf:
-   luft-hydraulische Schlagschrauber;
-   Schlagschrauber;
-   Maschinen zur Installation von Befestigungselementen;
-   Mutterndreher;
-   Winkelschrauber mit offenem Flachkopf (Flachkopfschrauber mit offener Fassung oder Rohrmutter-schrauber);
-   Ratschenschrauber;
-   Schraubendreher.
ANMERKUNG 1   Anhang B enthält Beispiele für Maschinen für Schraubverbindungen.
Der vorliegende Teil von ISO 11148 gilt nicht für die besonderen Anforderungen und Änderungen an Maschinen für Schraubverbindungen zum Zwecke des Spannens in eine Halterung.
Der vorliegende Teil von ISO 11148 behandelt alle signifikanten Gefährdungen, gefährliche Situationen oder Ereignisse, die beim vorgesehenen Gebrauch von Maschinen sowie unter Bedingungen vom Hersteller vor-hersehbaren Missbrauchs auftreten können; ausgenommen die Verwendung von Maschinen für Schraubver-bindungen in explosionsgefährdeten Atmosphären.
ANMERKUNG 2   EN 13463 1 enthält Anforderungen an nicht elektrisch betriebene Geräte für den Einsatz in explosionsgefährdeten Atmosphären.

Machines portatives à moteur non électrique - Exigences de sécurité - Partie 6: Machines d'assemblage pour éléments de fixation filetés (ISO 11148-6:2012)

L'ISO 11148-6:2012 s'applique aux machines portatives non électriques (appelées dans le reste du texte «machine portative d'assemblage pour éléments de fixation filetés» ou «machine portative d'assemblage») utilisées pour le serrage ou la mise en place d'éléments de fixation filetés. Les machines portatives d'assemblage pour éléments de fixation filetés peuvent être alimentées par air comprimé, fluide hydraulique ou moteurs à combustion interne et sont prévues pour être utilisées par un opérateur ou portées par la ou les mains de l'opérateur avec ou sans suspension, par exemple à l'aide d'un équilibreur.
L'ISO 11148-6:2012 couvre les clés à impulsion hydropneumatiques, les clés à choc, les machines pour mise en place d'éléments de fixation, les serreuses, les clés plates (serreuses à renvoi d'axe avec une noix de serrage ouverte ou clé de serrage pour tube), les clés à rochet et les visseuses.
L'ISO 11148-6:2012 ne couvre pas les exigences spécifiques et les modifications des machines portatives d'assemblage pour éléments de fixation filetés destinées à être montées sur un châssis.
L'ISO 11148-6:2012 traite de tous les phénomènes dangereux, situations dangereuses ou événements dangereux significatifs, à l'exception des machines portatives d'assemblage pour éléments de fixation filetés destinées à être utilisées dans une atmosphère potentiellement explosible, lorsqu'elles sont utilisées normalement et lorsqu'elles font l'objet d'un mauvais usage raisonnablement prévisible par le fabricant.

Neelektrična ročna orodja - Varnostne zahteve - 6. del: Orodja za vijačne zveze (ISO 11148-6:2012)

Ta del standarda ISO 11148 se uporablja za ročna neelektrična orodja (v nadaljnjem besedilu: orodja za vijačne zveze), namenjena stiskanju ali pritrjevanju navojev. Orodja za vijačne zveze lahko napaja stisnjen zrak, hidravlična tekočina ali motorji z notranjim zgorevanjem; uporabljal naj bi jih upravljavec in jih držal z eno ali obema rokama z ali brez vzmetenja, npr. z balanserjem. Ta del standarda ISO 11148 zajema – zračne hidravlične udarne vijačnike; – udarne vijačnike; – orodja za pritrjevanje/zabijanje; – izvijače; – odprte vijačne ključe (odprti univerzalni viličasti ključ ali vijačnik za cevne matice); – vijačnike z zaskočko; – privijala. Ta del standarda ISO 11148 ne obravnava posebnih zahtev in prilagoditev orodij za vijačne zveze za namestitev na stojalo. Ta del standarda ISO 11148 opisuje vsa večja tveganja, nevarne situacije ali nevarne dogodke, kadar se orodja uporabljajo v skladu z njihovim namenom in pod pogoji pričakovane nepravilne uporabe, ki jih določa proizvajalec, razen uporabe orodij za vijačne zveze v potencialno eksplozivnih okoljih.

General Information

Status
Published
Publication Date
18-Dec-2012
Withdrawal Date
29-Jun-2013
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
19-Dec-2012
Completion Date
19-Dec-2012

Relations

Buy Standard

Standard
EN ISO 11148-6:2013
English language
39 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11148-6:2013
01-maj-2013
1DGRPHãþD
SIST EN ISO 11148-6:2011
1HHOHNWULþQDURþQDRURGMD9DUQRVWQH]DKWHYHGHO2URGMD]DYLMDþQH]YH]H
,62
Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools
for threaded fasteners (ISO 11148-6:2012)
Handgehaltene nicht elektrisch betriebene Maschinen - Sicherheitsanforderungen - Teil
6: Maschinen für Schraubverbindungen (ISO 11148-6:2012)
Machines portatives à moteur non électrique - Exigences de sécurité - Partie 6:
Machines d'assemblage pour éléments de fixation filetés (ISO 11148-6:2012)
Ta slovenski standard je istoveten z: EN ISO 11148-6:2012
ICS:
25.140.10 3QHYPDWLþQDRURGMD Pneumatic tools
SIST EN ISO 11148-6:2013 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11148-6:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 11148-6:2013


EUROPEAN STANDARD
EN ISO 11148-6

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2012
ICS 25.140.10 Supersedes EN ISO 11148-6:2010
English Version
Hand-held non-electric power tools - Safety requirements - Part
6: Assembly power tools for threaded fasteners (ISO 11148-
6:2012)
Machines portatives à moteur non électrique - Exigences Handgehaltene nicht elektrisch betriebene Maschinen -
de sécurité - Partie 6: Machines d'assemblage pour Sicherheitsanforderungen - Teil 6: Maschinen für
éléments de fixation filetés (ISO 11148-6:2012) Schraubverbindungen (ISO 11148-6:2012)
This European Standard was approved by CEN on 17 December 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11148-6:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11148-6:2013
EN ISO 11148-6:2012 (E)
Contents Page
Foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC . 4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 11148-6:2013
EN ISO 11148-6:2012 (E)
Foreword
This document (EN ISO 11148-6:2012) has been prepared by Technical Committee ISO/TC 118
"Compressors and pneumatic tools, machines and equipment" in collaboration with Technical Committee
CEN/TC 255 “Hand-held, non-electric power tools - Safety” the secretariat of which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at
the latest by June 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11148-6:2010.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austri
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.