Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles - Amendment 1 (ISO 1628-1:2009/Amd 1:2012)

2012-02-23 EMA: Draft for // vote received in ISO/CS (see notification of 2012-02-22 in dataservice).
2011-01-24 EMA: // ENQ draft received in ISO/CS (see notification from 2011-01-21 in dataservice).
DOR should have been 2012-07-13

Kunststoffe - Bestimmung der Viskosität von Polymeren in verdünnter Lösung durch ein Kapillarviskosimeter - Teil 1: Allgemeine Grundlagen - Änderung 1 (ISO 1628-1:2009/Amd 1:2012)

Plastiques - Détermination de la viscosité des polymères en solution diluée à l'aide de viscosimètres à capillaires - Partie 1: Principes généraux - Amendement 1 (ISO 1628-1:2009/Amd 1:2012)

Polimerni materiali - Določanje viskoznosti polimerov v razredčenih raztopinah s kapilarnimi viskozimetri - 1. del: Splošna načela - Dopolnilo 1 (ISO 1628-1:2009/Amd 1:2012)1:2011)

Ta del standarda ISO 1628 določa splošne pogoje za določanje zmanjšane viskoznosti, lastne viskoznosti in vrednosti K polimerov v razredčenih raztopinah. Določa standardne parametre, ki se uporabljajo pri merjenju viskoznosti, in se lahko uporablja za pripravo standardov za merjenje viskoznosti v raztopinah posameznih vrst polimerov. Uporabi se lahko tudi za merjenje in sporočanje viskoznosti polimerov v raztopini, za katero niso na voljo posebni standardi.

General Information

Status
Withdrawn
Publication Date
30-Jun-2012
Withdrawal Date
16-Mar-2021
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
17-Mar-2021

Relations

Buy Standard

Amendment
EN ISO 1628-1:2009/oprA1:2011
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Amendment
EN ISO 1628-1:2009/A1:2012
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1628-1:2009/oprA1:2011
01-junij-2011
3ROLPHUQLPDWHULDOL'RORþDQMHYLVNR]QRVWLSROLPHURYYUD]UHGþHQLKUD]WRSLQDKV
NDSLODUQLPLYLVNR]LPHWULGHO6SORãQDQDþHOD ,62'$0
Plastics - Determination of the viscosity of polymers in dilute solution using capillary
viscometers - Part 1: General principles (ISO 1628-1:2009/DAM 1:2011)
Kunststoffe - Bestimmung der Viskosität von Polymeren in verdünnter Lösung durch ein
Kapillarviskosimeter - Teil 1: Allgemeine Grundlagen (ISO 1628-1:2009/DAM 1:2011)
Plastiques - Détermination de la viscosité des polymères en solution diluée à l'aide de
viscosimètres à capillaires - Partie 1: Principes généraux (ISO 1628-1:2009/DAM
1:2011)
Ta slovenski standard je istoveten z: EN ISO 1628-1:2009/prA1
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
SIST EN ISO 1628-1:2009/oprA1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1628-1:2009/oprA1:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 1628-1:2009/oprA1:2011


EUROPEAN STANDARD
DRAFT
EN ISO 1628-1:2009
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
February 2011
ICS 83.080.01
English Version
Plastics - Determination of the viscosity of polymers in dilute
solution using capillary viscometers - Part 1: General principles
(ISO 1628-1:2009/DAM 1:2011)
Plastiques - Détermination de la viscosité des polymères
en solution diluée à l'aide de viscosimètres à capillaires -
Partie 1: Principes généraux (ISO 1628-1:2009/DAM
1:2011)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 249.

This draft amendment A1, if approved, will modify the European Standard EN ISO 1628-1:2009. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1628-1:2009/prA1:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 1628-1:2009/oprA1:2011
EN ISO 1628-1:2009/prA1:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 1628-1:2009/oprA1:2011
EN ISO 1628-1:2009/prA1:2011 (E)
Foreword
This document (EN ISO 1628-1:2009/prA1:2011) has been prepared by Technical Committee ISO/TC 61
"Plastics" in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by
NBN.
This document is currently submitted to the parallel Enquiry.
Endorsement notice
The text of ISO 1628-1:2009/DAM 1:2011 has been approved by CEN as a EN ISO 1628-1:2009/prA1:2011
without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 1628-1:2009/oprA1:2011

---------------------- Page: 6 ----------------------

SIST EN ISO 1628-1:2009/oprA1:2011

DRAFT AMENDMENT ISO 1628-1:2009/DAM 1
ISO/TC 61/SC 5 Secretariat: DIN
Voting begins on Voting terminates on

2011-02-10 2011-07-10
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION  •  МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ  •  ORGANISATION INTERNATIONALE DE NORMALISATION


Plastics — Determination of the viscosity of polymers in dilute
solution using capillary viscometers —
Par
...

SLOVENSKI STANDARD
SIST EN ISO 1628-1:2009/A1:2012
01-september-2012
3ROLPHUQLPDWHULDOL'RORþDQMHYLVNR]QRVWLSROLPHURYYUD]UHGþHQLKUD]WRSLQDKV
NDSLODUQLPLYLVNR]LPHWULGHO6SORãQDQDþHOD'RSROQLOR ,62
$PG 
Plastics - Determination of the viscosity of polymers in dilute solution using capillary
viscometers - Part 1: General principles - Amendment 1 (ISO 1628-1:2009/Amd 1:2012)
Kunststoffe - Bestimmung der Viskosität von Polymeren in verdünnter Lösung durch ein
Kapillarviskosimeter - Teil 1: Allgemeine Grundlagen - Änderung 1 (ISO 1628-
1:2009/Amd 1:2012)
Plastiques - Détermination de la viscosité des polymères en solution diluée à l'aide de
viscosimètres à capillaires - Partie 1: Principes généraux - Amendement 1 (ISO 1628-
1:2009/Amd 1:2012)
Ta slovenski standard je istoveten z: EN ISO 1628-1:2009/A1:2012
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
SIST EN ISO 1628-1:2009/A1:2012 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1628-1:2009/A1:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 1628-1:2009/A1:2012


EUROPEAN STANDARD
EN ISO 1628-1:2009/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2012
ICS 83.080.01
English Version
Plastics - Determination of the viscosity of polymers in dilute
solution using capillary viscometers - Part 1: General principles -
Amendment 1 (ISO 1628-1:2009/Amd 1:2012)
Plastiques - Détermination de la viscosité des polymères Kunststoffe - Bestimmung der Viskosität von Polymeren in
en solution diluée à l'aide de viscosimètres à capillaires - verdünnter Lösung durch ein Kapillarviskosimeter - Teil 1:
Partie 1: Principes généraux - Amendement 1 (ISO 1628- Allgemeine Grundlagen - Änderung 1 (ISO 1628-
1:2009/Amd 1:2012) 1:2009/Amd 1:2012)
This amendment A1 modifies the European Standard EN ISO 1628-1:2009; it was approved by CEN on 13 July 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1628-1:2009/A1:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 1628-1:2009/A1:2012
EN ISO 1628-1:2009/A1:2012 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 1628-1:2009/A1:2012
EN ISO 1628-1:2009/A1:2012 (E)
Foreword
This document (EN ISO 1628-1:2009/A1:2012) has been prepared by Technical Committee ISO/TC 61
"Plastics" in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by
NBN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2013, and conflicting national standards shall be withdrawn at
the latest by January 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.