Safety requirements for lifting tables

1.1   This document specifies the safety requirements for lifting tables for raising and/or lowering goods and/or persons associated with the movement of goods carried by the lifting table (i.e. not for passenger use), for a vertical travel of up to 3,0 m.
1.2   This European Standard deals with all significant hazards pertinent to lifting tables when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
1.3   Both power operated and manually operated lifting tables are included whether stationary or mobile.
1.4   This document does not apply to the following equipment:
-   permanently installed lifting tables, serving specific levels of a building and fitted with a car;
-   permanently installed lifting tables, serving specific levels of a building, not fitted with a car but with a vertical travel of more than 2,0 m;
-   power operated lifting platforms for persons with impaired mobility;
-   lifting tables for airport ground equipment;
-   lifting tables for marine use;
-   mobile elevating work platforms;
-   vehicle lifts for maintenance;
-   mobile lifting tables used for fire fighting;
-   mobile lifting tables used as fork lift trucks, pallet trucks and order pickers;
-   mobile lifting tables with a travelling speed of more than 1,6 m/s;
-   rail dependent storage and retrieval equipment;
-   theatre stage lifts.
1.5   This standard does not consider the Power Supply to the lifting table by Internal Combustion Engine.
This standard does not establish the additional requirements for:
-   Operation in severe conditions (e.g. extreme climates, freezer applications, strong magnetic fields);
-   Operation subject to special rules (e.g. potentially explosive atmospheres, mines);
-   Handling of loads, the nature of which could lead to dangerous situations (e.g. molten metal, acids, radiating materials, esp

Sicherheitsanforderungen an Hubtische

1.1 !Dieses Dokument beschreibt Sicherheitsanforderungen für Hubtische zum Heben und/oder Senken von Gütern und/oder Personen in Zusammenhang mit der Bewegung der vom Hubtisch gehobenen Güter (d. h. nicht für die Benutzung von Personen allein) bis zu einem vertikalen Hub von 3,0 m."
1.2   Diese Europäische Norm behandelt von Hubtischen ausgehende signifikante Gefährdungen, wenn diese bestimmungsgemäß unter den vom Hersteller vorgesehenen Bedingungen (siehe Abschnitt 4) benutzt werden. Diese Europäische Norm beschreibt die geeigneten technischen Maßnahmen zur Vermeidung oder Verminderung der Risiken, die sich aus den zutreffenden Gefährdungen ergeben.
1.3   Sowohl kraftbetriebene als auch handbetriebene Hubtische, die ortsfest oder ortsveränderlich sein können, werden erfasst.
1.4   !Dieses Dokument findet keine Anwendung auf folgende Geräte:
-   dauerhaft eingebaute Hubtische, die eine Kabine besitzen und festgelegte Ebenen eines Gebäudes anfahren;
-   dauerhaft eingebaute Hubtische mit einem vertikalen Hub über 2,0 m, die keine Kabine besitzen und festgelegte Ebenen eines Gebäudes anfahren;
-   kraftbetriebene Hubplattformen für Behinderte;
-   Hubtische als Bodengeräte der Luftfahrt;
-   Hubtische für die Verwendung auf Schiffen;
-   fahrbare Hubarbeitsbühnen;
-   Fahrzeug-Hebebühnen für die Instandhaltung;
-   fahrbare Hubtische zur Feuerbekämpfung;
-   fahrbare Hubtische, die als Gabelstapler, Gabelhubwagen und Kommissionierhubwagen verwendet werden;
-   fahrbare Hubwagen mit mehr als 1,6 m/s Fahrgeschwindigkeit;
-   Regalbediengeräte;
-   Versenk- und Hebevorrichtungen von Theaterbühnen."
1.5   Diese Norm berücksichtigt keinen verbrennungsmotorischen Antrieb des Hubtisches.
Diese Norm legt keine zusätzlichen Anforderungen fest für:
-   Betrieb unter erschwerten Bedingungen (z. B. extremes Klima, Anwendungen im Gefrierbereich, starke Magnetfelder);
-   Betrieb, der besonderen Regelungen unterliegt (z. B. explosive Atmosphäre, Bergwerk);
-   (....)

Prescriptions de sécurité des tables élévatrices

1.1 !Le présent document définit les prescriptions de sécurité relatives aux tables élévatrices destinées à lever
et/ou à descendre des charges et/ou des personnes associées au déplacement des charges transportées par la table
élévatrice (c'est-à-dire pas pour le déplacement de passagers), avec une course verticale ne dépassant pas 3,0 m."
1.2 La présente norme européenne traite de tous les phénomènes dangereux significatifs relatifs aux tables
élévatrices utilisées selon les conditions prévues par le fabricant (voir article 4). La présente norme européenne
spécifie les mesures techniques appropriées pour réduire et éliminer les risques émanant des phénomènes
dangereux significatifs.
1.3 Elle vise à la fois les tables élévatrices motorisées et manuelles, qu'elles soient fixes ou mobiles.
1.4 !La présente Norme européenne ne concerne pas les matériels suivants :
- tables élévatrices installées de façon permanente, desservant des niveaux spécifiques d'une construction, et
équipées d'une nacelle ;
- tables élévatrices installées de façon permanente, desservant des niveaux spécifiques d'une construction, non
équipées d'une nacelle mais avec une course verticale de plus de 2,0 m ;
- tables élévatrices motorisées pour les personnes à mobilité réduire ;
- tables élévatrices pour l'équipement au sol des aéroports ;
- tables élévatrices à usage maritime ;
- plates-formes de travail élévatrices mobiles ;
- élévateurs de véhicules pour la maintenance ;
- tables élévatrices mobiles utilisées pour lutter contre les incendies ;
- tables élévatrices mobiles utilisées comme chariots élévateurs à fourche, chariots à palettes et préparateurs de
commande ;
- tables élévatrices mobiles dont la vitesse de translation est supérieure à 1,6 m/s ;
- transtockeur ;
- ascenseurs/élévateurs de théâtre."

Varnostne zahteve za dvižne mize

Ta dokument določa varnostne zahteve za dvižne mize za dvigovanje in/ali spuščanje blaga in/ali oseb, povezanih s premikom blaga, ki ga dvižna miza prenaša (tj. ne za potnike), za navpični hod do 3,0 m. Ta evropski standard obravnava vse velike nevarnosti, ki se nanašajo na dvižne mize, kadar se namensko uporabljajo, in pod pogoji, ki jih je predvidel proizvajalec (glej Klavzulo 4). Ta evropski standard določa primerne tehnične ukrepe za odpravo ali zmanjšanje tveganj, ki se pojavijo zaradi znatnih nevarnosti.  Gnane in ročno vodene mize so vključene, tako nepremične kot premične. Ta dokument ne velja za naslednjo opremo: stalno nameščene dvižne mize, ki služijo določenim nivojem zgradbe in so opremljene za avtomobile; stalno nameščene dvižne mize, ki služijo določenim nivojem zgradbe in niso opremljene za avtomobile, ampak z navpičnim hodom večjim od 2,0 m; gnano vodene dvižne ploščadi za osebe, ki imajo težave z gibanjem; dvižne mize za opremo na letališču; dvižne mize za uporabo v pomorstvu; EN 1570:1998+A2:2009 (E) 6 premične dvižne delovne ploščadi; dvigovanje vozil za vzdrževanje; premične dvižne mize uporabljene pri gašenju požarov; premične dvižne mize uporabljene kot viličarji, vozički za premeščanje palet in ostali pobiralniki; premične dvižne mize s potovalno hitrostjo višjo od 1,6 m/s; oprema za shranjevanje ali razkladanje, ki je odvisna od tirov; dvigala gledaliških odrov. Ta standard ne obravnava napajalne enote dvižne mize z motorjem z notranjim zgorevanjem. Ta standard ne določa dodatnih zahtev za: delovanje v skrajnih pogojih (npr. ekstremna podnebja, uporaba v zamrzovalnikih, močnih elektromagnetnih poljih); delovanje ob upoštevanju posebnih pravil (npr. potencialno eksplozivne atmosfere, rudniki); ravnanje z bremeni, katerih lastnosti bi lahko privedle do nevarnih situacij (npr. staljena kovina, kisline, sevalni materiali, posebno krhka bremena); nevarnosti, ki se lahko pripetijo med postavitvijo, transportom ali odstranjevanjem; nameščanje opreme na nakladalni ploščadi ali njena zamenjava; povezovanje v sisteme drugih strojev, upravljanje iz več kot ene kontrolne postaje itd.; brezžične kontrole; dvižne mize, kjer hidravlični pritisk izvira neposredno iz plinskega tlaka.

General Information

Status
Withdrawn
Publication Date
14-Jul-2009
Withdrawal Date
25-Oct-2011
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
26-Oct-2011
Completion Date
26-Oct-2011

Relations

Effective Date
30-May-2009

Buy Standard

Standard
EN 1570:1999+A2:2010
English language
45 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Varnostne zahteve za dvižne mizeSicherheitsanforderungen an HubtischePrescriptions de sécurité des tables élévatricesSafety requirements for lifting tables53.020.99Druga dvigalna opremaOther lifting equipmentICS:Ta slovenski standard je istoveten z:EN 1570:1998+A2:2009SIST EN 1570:1999+A2:2010en,fr,de01-februar-2010SIST EN 1570:1999+A2:2010SLOVENSKI
STANDARD



SIST EN 1570:1999+A2:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1570:1998+A2
July 2009 ICS 53.020.99 Supersedes EN 1570:1998English Version
Safety requirements for lifting tables
Prescriptions de sécurité des tables élévatrices
Sicherheitsanforderungen an Hubtische This European Standard was approved by CEN on 7 May 1998 and includes Amendment 1 approved by CEN on 7 June 2004 and Amendment 2 approved by CEN on 19 June 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1570:1998+A2:2009: ESIST EN 1570:1999+A2:2010



EN 1570:1998+A2:2009 (E) 2 Contents Page Foreword .4Introduction .51 Scope .52 Normative references .63 Definitions .74 List of hazards .95 Safety requirements . 145.1 Calculations . 145.1.1 Stress . 145.1.2 Stability . 155.2 Safeguarding . 155.3 Speeds . 185.4 Platform . 195.5 Operator control position . 195.6 Mobile lifting tables . 205.7 Mechanical driving system . 225.8 Hydraulic system . 245.9 Pneumatic system .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.