EN ISO 7053:2019
(Main)Fasteners - Hexagon washer head tapping screws (ISO 7053:2019)
Fasteners - Hexagon washer head tapping screws (ISO 7053:2019)
This document specifies the characteristics of hexagon washer head tapping screws, made of steel and stainless steel, with thread sizes ST2,2 to ST8, and with product grade A.
Mechanische Verbindungselemente - Sechskant-Blechschrauben mit Bund (ISO 7053:2019)
Dieses Dokument legt Eigenschaften für Sechskant-Blechschrauben mit Bund aus Stahl und nichtrostendem Stahl mit den Gewindegrößen ST2,2 bis ST8 und der Produktklasse A fest.
Fixations - Vis à tôle à tête hexagonale à embase plate (ISO 7053:2019)
Le présent document spécifie les caractéristiques des vis à tôle à tête hexagonale à embase plate, en acier et en acier inoxydable, de dimensions de filetage de ST2,2 à ST8, et de grade A.
Vezni elementi - Samorezni vijak s šestrobo glavo s podložko (ISO 7053:2019)
Ta dokument določa značilnosti vrtalnih vijakov s šestrobo glavo s podložko in samoreznim navojem
iz jekla, z velikostmi navojev od ST2,9 do ST6,3 in razredom izdelave A.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 7053:2019
01-oktober-2019
Nadomešča:
SIST EN ISO 7053:2011
Vezni elementi - Samorezni vijak s šestrobo glavo s podložko (ISO 7053:2019)
Fasteners - Hexagon washer head tapping screws (ISO 7053:2019)
Sechskant-Blechschrauben mit Bund (ISO 7053:2019)
Fixations - Vis à tôle à tête hexagonale à embase plate (ISO 7053:2019)
Ta slovenski standard je istoveten z: EN ISO 7053:2019
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN ISO 7053:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 7053:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 7053:2019
EN ISO 7053
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2019
EUROPÄISCHE NORM
ICS 21.060.10 Supersedes EN ISO 7053:2011
English Version
Fasteners - Hexagon washer head tapping screws (ISO
7053:2019)
Fixations - Vis à tôle à tête hexagonale à embase plate Mechanische Verbindungselemente - Sechskant-
(ISO 7053:2019) Blechschrauben mit Bund (ISO 7053:2019)
This European Standard was approved by CEN on 2 June 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7053:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 7053:2019
EN ISO 7053:2019 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 7053:2019
EN ISO 7053:2019 (E)
European foreword
This document (EN ISO 7053:2019) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2020, and conflicting national standards shall
be withdrawn at the latest by January 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 7053:2011.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 7053:2019 has been approved by CEN as EN ISO 7053:2019 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 7053:2019
---------------------- Page: 6 ----------------------
SIST EN ISO 7053:2019
INTERNATIONAL ISO
STANDARD 7053
Third edition
2019-06
Fasteners — Hexagon washer head
tapping screws
Fixations — Vis à tôle à tête hexagonale à embase plate
Reference number
ISO 7053:2019(E)
©
ISO 2019
---------------------- Page: 7 ----------------------
SIST EN ISO 7053:2019
ISO 7053:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.