EN ISO 16000-11:2024
(Main)Indoor air - Part 11: Determination of the emission of volatile organic compounds from samples of building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2024)
Indoor air - Part 11: Determination of the emission of volatile organic compounds from samples of building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2024)
This document specifies the sampling procedures, transport conditions, storage and substrate used that can affect emissions of volatile organic compounds for three types of building products or furnishing: solid, liquid and combined. For individual products, the preparation of a test specimen for each type is specified.
Innenraumluftverunreinigungen - Teil 11: Bestimmung der Emission von flüchtigen organischen Verbindungen aus Proben von Bauprodukten und Einrichtungsgegenständen - Probenahme, Lagerung der Proben und Vorbereitung der Prüfstücke (ISO 16000-11:2024)
Dieses Dokument legt die Probenahmeverfahren, die Transportbedingungen, die Lagerung und die eingesetzten Trägermaterialien fest, die die Emissionen flüchtiger organischer Verbindungen für drei Arten von Bauprodukten oder Einrichtungsgegenständen beeinflussen können: feste, flüssige und kombinierte. Für einzelne Produkte wird die Vorbereitung eines Prüfstücks für jeden Produkttyp festgelegt.
Air intérieur - Partie 11: Dosage de l'émission de composés organiques volatils d'échantillons de produits de construction et d'objets d'équipement - Échantillonnage, conservation des échantillons et préparation des éprouvettes d'essais (ISO 16000-11:2024)
Le présent document spécifie les modes opératoires d’échantillonnage, les conditions de transport, le stockage et le support utilisés, susceptibles d’avoir une incidence sur les émissions de composés organiques volatils pour trois types de produit de construction ou objets d’équipement: solides, liquides et combinés. Pour les produits individuels, la préparation d’une éprouvette d’essai pour chaque type est spécifiée.
Notranji zrak - 11. del: Določanje emisije hlapnih organskih spojin iz vzorcev gradbenih proizvodov in opreme - Vzorčenje, shranjevanje vzorcev in priprava preskusnih vzorcev (ISO 16000-11:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 16000-11:2023
01-maj-2023
Notranji zrak - 11. del: Določevanje emisije hlapnih organskih spojin iz gradbenih
proizvodov in opreme - Vzorčenje, shranjevanje vzorcev in priprava preskusnih
vzorcev (ISO/DIS 16000-11:2023)
Indoor air - Part 11: Determination of the emission of volatile organic compounds from
building products and furnishing - Sampling, storage of samples and preparation of test
specimens (ISO/DIS 16000-11:2023)
Innenraumluftverunreinigungen - Teil 11: Bestimmung der Emission von flüchtigen
organischen Verbindungen aus Bauprodukten und Einrichtungsgegenständen -
Probenahme, Lagerung der Proben und Vorbereitung der Prüfstücke (ISO/DIS 16000-
11:2023)
Air intérieur - Partie 11: Dosage de l'émission de composés organiques volatils de
produits de construction et d'objets d'équipement - Échantillonnage, conservation des
échantillons et préparation d'échantillons pour essai (ISO/DIS 16000-11:2023)
Ta slovenski standard je istoveten z: prEN ISO 16000-11
ICS:
13.040.20 Kakovost okoljskega zraka Ambient atmospheres
oSIST prEN ISO 16000-11:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN ISO 16000-11:2023
oSIST prEN ISO 16000-11:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 16000-11
ISO/TC 146/SC 6 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-03-22 2023-06-14
Indoor air —
Part 11:
Determination of the emission of volatile organic
compounds from building products and furnishing —
Sampling, storage of samples and preparation of test
specimens
ICS: 13.040.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 16000-11:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
oSIST prEN ISO 16000-11:2023
ISO/DIS 16000-11:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 16000-11
ISO/TC 146/SC 6 Secretariat: DIN
Voting begins on: Voting terminates on:
Indoor air —
Part 11:
Determination of the emission of volatile organic
compounds from building products and furnishing —
Sampling, storage of samples and preparation of test
specimens
ICS: 13.040.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 16000-11:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
oSIST prEN ISO 16000-11:2023
ISO/DIS 16000-11:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviated terms.2
5 Sampling the product and transport and storage of sample . 2
5.1 Sampling of the product to be tested . 2
5.2 Sample packaging and transport . 2
5.3 Sample description . 3
5.4 Storage of the sample prior to starting the testing . 3
6 Preparation of test specimens . 3
Annex A (normative) Solid products — Procedure for sampling and test specimen
preparation . 4
Annex B (normative) Liquid products — Procedure for sampling and test specimen
preparation . 7
Annex C (informative) Combined products .11
Annex D (informative) Cut edges emission and underfloor heating (Ondol) test .13
Bibliography .15
iii
oSIST prEN ISO 16000-11:2023
ISO/DIS 16000-11:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 146, Air quality, Subcommittee SC 6,
Indoor air.
This second edition cancels and replaces the first edition (ISO 16000-11:2006), which has been
technically revised.
The main changes compared to the previous edition are as follows:
— More detailed description for the preparation of samples of board and solid samples like paints,
varnishes and impregnating primers.
— Recommending the wet layer thickness instead of the dry film thickness for preparing liquid
samples.
— Preparing samples for determing the cut edge emissions and emissions from under floor heating.
A list of all parts in the ISO 16000 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
oSIST prEN ISO 16000-11:2023
ISO/DIS 16000-11:2023(E)
Introduction
The determination of volatile organic compounds (VOCs) emitted from building products using emission
test chambers in conjunction with the standardised sampling, storage of samples and preparation of
test specimens has objectives such as:
— to provide manufacturers, builders, and end users with emission data useful for the evaluation of
the impact of building products on the indoor air quality;
— to promote the development of improved products.
The method can in principle be used for most building products used indoors.
v
oSIST prEN ISO 16000-11:2023
oSIST prEN ISO 16000-11:2023
DRAFT INTERNATIONAL STANDARD ISO/DIS 16000-11:2023(E)
Indoor air —
Part 11:
Determination of the emission of volatile organic
compounds from building products and furnishing —
Sampling, storage of samples and preparation of test
specimens
1 Scope
Studies of the emission of volatile organic compounds from unused building products or furnishing in
test chambers or cells require proper handling of the product prior to testing, and during the testing
period.
This document defines three types of building products or furnishing: solid, liquid and combined. For
each type, specifications are given for the sampling procedures, transport conditions, storage, and
substrate used that can affect emissions of volatile organic compounds. For individual products, the
preparation of a test specimen for each type is prescribed.
NOTE Depending on the non-homogeneity of the product, it can be necessary to make measurements on
different test specimens to determine the specific emission rate.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 196-1, Methods of testing cement — Part 1: Determination of strength
EN 1937, Test method for hydraulic setting floor smoothing and/or levelling compounds — Standard mixing
procedures
EN 13892-1, Methods of test for screed materials — Part 1: Sampling, making and curing specimens for test
ISO 16000-9, Indoor air — Part 9: Determination of the emission of volatile organic compounds from
building products and furnishing — Emission test chamber method
ISO 16000-10, Indoor air — Part 10: Determination of the emission of volatile organic compounds from
building products and furnishing — Emission test cell method
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
oSIST prEN ISO 16000-11:2023
ISO/DIS 16000-11:2023(E)
3.1
solid product
〈building product or furnishing〉 resilient or rigid product whose properties meet user-specifications
directly without a transition phase, e.g. curing or drying
EXAMPLE 1 Examples of resilient products are several insulation products, flexible flooring and wall
coverings.
EXAMPLE 2 Examples of rigid products are tiles, parquets, laminated floorings, wall construction products,
such as chip- and gypsum boards, wood panels, ceiling materials, acoustic panels, and doors etc.
3.2
liquid product
〈building product or furnishing〉 product whose properties meet the user-specifications after a
transitio
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.