FprEN ISO 19650-6

Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - Information management using building information modelling - Part 6: Health and safety information (ISO/FDIS 19650-6:2024)

This Document outlines the concepts and principles to ensure that Health and Safety information is developed, shared and managed collaboratively, ensuring the economic, environmental and social benefits are secured.
This Document;
1) specifies requirements for the collaborative sharing of structured H&S information throughout the asset life-cycle.
2) supports the progressive development of structured H&S information for all built assets.
3) provides guidance on how H&S information is produced, flows and can be used throughout the asset lifecycle. Whilst all H&S risk information can be included within an information model, this document requires the contextualization and filtering of hazards and risks to prioritize the elevated risks and aspects that are safety critical.
4) sets out a framework (risk information cycle) for the application of H&S information-use through BIM processes and applications.
This document specifies how to use H&S information in order to:
a)   provide a safer and healthier environment for end-users;
b)   mitigate the inherent hazards and risks across the asset lifecycle;
c)   result in improved H&S performance, fewer incidents and associated impacts;
d)   provide for clearer, more assured and relevant H&S information to the ‘right-people’ at the ‘right time’;
e)   reduce costs across the whole lifecycle of the asset.
The exchange and use of H&S information is intended to support:
1)   representation of the nature and characteristics of the project, site, built asset and associated activities;
2)   representation of H&S hazards, risks and associated factors;
3)   the generalization, dissemination and re-use of H&S knowledge and experience.
This document is applicable to individuals and organizations that contribute to and influence the definition of design, construction, use (including maintenance) and end of life of a built asset.
This standard is intended to address information management at a stage of maturity described as “building information modelling” (BIM according to the ISO 19650 series. However, the principles and requirements of this document can be applied equally to non-BIM projects.

Organisation und Digitalisierung von Informationen zu Bauwerken und Ingenieurleistungen, einschließlich Bauwerksinformationsmodellierung (BIM) - Informationsmanagement mit BIM - Teil 6: Gesundheit und Sicherheit (ISO/FDIS 19650‑6:2024)

Dieses Dokument legt Konzepte und Grundsätze für die Klassifizierung, das Teilen und die kollaborative Bereitstellung von Gesundheits- und Sicherheitsinformationen zur Sicherung wirtschaftlicher, umweltbezogener und sozialer Vorteile fest.
Dieses Dokument:
a)   legt Anforderungen an das kollaborative Teilen strukturierter Gesundheits- und Sicherheitsinformationen während der gesamten Lebensdauer von Projekten und Assets fest;
b)   unterstützt die Digitalisierung strukturierter Gesundheits- und Sicherheitsinformationen während des Lebenszyklusses von Projekten und Assets schrittweise von Beginn an;
c)   legt fest, wie Gesundheits- und Sicherheitsinformationen für die Verwendung während des gesamten Lebenszyklusses eines Projekts und Assets geteilt werden;
d)   legt ein Rahmenwerk für den Gesundheits- und Sicherheitsinformationszyklus für die Identifizierung, die Nutzung, das Teilen und die Generalisierung von Gesundheits- und Sicherheitsinformationen durch Informationsmanagement-Prozesse fest.
Dieses Dokument ist für einzelne Personen und Organisationen, die zu der Beschaffung, der Gestaltung, dem Bau und der Nutzung (einschließlich Wartung) und dem Ende des Lebenszyklus von Gebäude- und Infrastruktur-Assets beitragen und diesen beeinflussen.
Die in diesem Dokument enthaltenen Grundsätze und Anforderungen können gleichermaßen auf die Liefer- oder Gebrauchsphasen, in denen kein BIM zum Einsatz kommt, angewendet werden.

Organisation et numérisation des informations relatives aux bâtiments et ouvrages de génie civil, y compris modélisation des informations de la construction (BIM) - Gestion de l’information par la modélisation des informations de la construction - Partie 6: Informations relatives à la santé et à la sécurité (ISO/FDIS 19650-6:2024)

Organizacija in digitalizacija informacij v gradbeništvu - Upravljanje informacij z BIM - 6. del: Zdravstvene in varnostne informacije (ISO/DIS 19650-6:2023)

General Information

• Status: Not Published
• Publication Date: 02-Mar-2025
• ICS: 35.240.67 - IT applications in building and construction industry
• ICS: 91.010.01 - Construction industry in general
• ICS: 93.010 - Civil engineering in general
• Technical Committee: CEN/TC 442 - Building Information Modelling (BIM)
• Drafting Committee: CEN/TC 442/WG 3 - Information Delivery Specification
• Current Stage: 5020 - Submission to Vote - Formal Approval
• Start Date: 03-Oct-2024
• Due Date: 15-Oct-2023
• Completion Date: 03-Oct-2024
• Ref Project: oSIST prEN ISO 19650-6:2024 - Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - Information management using building information modelling - Part 6: Health and safety information (ISO/DIS 19650-6:2023)

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2024
Organizacija in digitalizacija informacij v gradbeništvu - Upravljanje informacij z
BIM - 6. del: Zdravstvene in varnostne informacije (ISO/DIS 19650-6:2023)
Organization and digitization of information about buildings and civil engineering works,
including building information modelling (BIM) - Information management using building
information modelling - Part 6: Health and safety information (ISO/DIS 19650-6:2023)
Organisation und Digitalisierung von Informationen zu Bauwerken und
Ingenieurleistungen, einschließlich Bauwerksinformationsmodellierung (BIM) -
Informationsmanagement mit BIM - Teil 6: Gesundheit und Sicherheit (ISO/DIS 19650-
6:2023)
Organisation et numérisation des informations relatives aux bâtiments et ouvrages de
génie civil, y compris modélisation des informations de la construction (BIM) - Gestion de
l’information par la modélisation des informations de la construction - Partie 6:
Informations relatives à la santé et à la sécurité (ISO/DIS 19650-6:2023)
Ta slovenski standard je istoveten z: prEN ISO 19650-6
ICS:
35.240.67 Uporabniške rešitve IT v IT applications in building
gradbeništvu and construction industry
91.010.01 Gradbeništvo na splošno Construction industry in
general
93.010 Nizke gradnje na splošno Civil engineering in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT INTERNATIONAL STANDARD
ISO/DIS 19650-6
ISO/TC 59/SC 13 Secretariat: SN
Voting begins on: Voting terminates on:
2023-11-28 2024-02-20
Organization and digitization of information about
buildings and civil engineering works, including building
information modelling (BIM) — Information management
using building information modelling —
Part 6:
Health and safety information
ICS: 91.010.01; 93.010; 35.240.67
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 19650-6:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

ISO/DIS 19650-6:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19650-6
ISO/TC 59/SC 13 Secretariat: SN
Voting begins on: Voting terminates on:

Organization and digitization of information about
buildings and civil engineering works, including building
information modelling (BIM) — Information management
using building information modelling —
Part 6:
Health and safety information
ICS: 91.010.01; 93.010; 35.240.67
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 19650-6:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

ISO/DIS 19650-6:2023(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 2
4 Health and safety information .3
4.1 Objective. 3
4.2 Health and safety information . 3
4.2.1 Types of health and safety risk . 3
4.2.2 Context . 3
4.2.3 Health and safety risk prioritization . 4
4.2.4 Risk treatment . 4
4.2.5 Incidents . 4
4.2.6 Overview . 4
4.3 Schema . 5
4.3.1 Health and safety risk schema . 5
4.3.2 Risk treatment schema . 7
4.3.3 Incident sub-schema . 9
4.3.4 Context sub-schema. 10
4.3.5 Properties . 10
4.3.6 Categorization . 11
4.3.7 Level of risk . 11
4.4 Health and safety risk, risk treatment and incident identifiers . 11
4.4.1 Risk identifier, risk treatment, and incident identifier . 11
4.4.2 Context identifier .12
4.5 Using Information .12
4.5.1 Sharing information .12
4.5.2 Presenting Information .12
4.5.3 Learning . 12
5 Information Requirements .13
5.1 Organizational Information Requirements . 13
5.2 Asset Information Requirements . 13
5.3 Project Information Requirements . 13
5.4 Exchange Information Requirements . 14
5.4.1 Information about health and safety risk management . 14
5.4.2 Information about the asset . 14
5.4.3 Supporting evidence . 15
5.4.4 Re-usable information . 15
5.5 Review of information deliverables . 15
6 Process . .15
6.1 Process overview . 15
6.2 Assessment and Need .15
6.2.1 Incorporate health and safety information management into information
management functions . 15
6.2.2 Establish the health and safety information requirements . .15
6.2.3 Establishing health and safety information exchange protocols . 16
6.2.4 Provision of existing health and safety information. 16
6.3 Invitation to tender . 16
6.4 Tender response . 16
6.4.1 Risk management . 17
6.4.2 Risk associations . 17
6.4.3 Risk methods . 17
iii
ISO/DIS 19650-6:2023(E)
6.5 Appointment . 17
6.6 Mobilization . 18
...