EN 12697-2:2015

Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution

This European Standard specifies a procedure for the determination of the particle size distribution of the aggregates of bituminous mixtures by sieving. The test is applicable to aggregates recovered after binder extraction in accordance with EN 12697-1 or EN 12697-39.
The applicability of this European Standard is described in the product standards for bituminous mixtures.
NOTE   Fibres, solid (non-soluble during extraction) additives and (some) binder modifiers influence the test result.

Asphalt - Prüfverfahren - Teil 2: Korngrößenverteilung

Diese Europäische Norm legt ein Verfahren für die Bestimmung der Korngrößenverteilung der Gesteinskör-nungen in Asphalt mittels Siebanalyse fest. Die Prüfung ist für Gesteinskörnungen, die nach Extraktion des Bindemittels nach EN 12697-1 oder EN 12697-39 rückgewonnen wurden, anwendbar.
Die Anwendbarkeit dieser Europäischen Norm ist in den Produktnormen für Asphalt beschrieben.
ANMERKUNG   Fasern, feste Zusatzstoffe (die bei der Extraktion nicht in Lösung gehen) und (einige) Modifizierungs-mittel für Bindemittel beeinflussen das Prüfergebnis.

Mélanges bitumineux - Méthode d'essai - Partie 2: Granulométrie

La présente Norme européenne spécifie un mode opératoire pour la détermination de la composition granulométrique des granulats dans les mélanges bitumineux, par tamisage. L'essai s'applique aux granulats récupérés après extraction du liant selon l'EN 12697-1 ou l'EN 12697-39.
L'applicabilité de la présente Norme européenne est décrite dans les normes de produits relatives aux mélanges bitumineux.
NOTE   Les fibres, additifs solides (non solubles durant l'extraction) et (certains) modificateurs de liants influencent le résultat de l'essai.

Bitumenske zmesi - Preskusne metode - 2. del: Ugotavljanje zrnavosti

General Information

• Status: Withdrawn
• Publication Date: 28-Apr-2015
• Withdrawal Date: 13-Aug-2019
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 1 - Bituminous mixtures
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 14-Aug-2019
• Ref Project: SIST EN 12697-2:2015 - Bituminous mixtures - Test method - Part 2: Determination of particle size distribution

Relations

• Replaces: EN 12697-2:2002+A1:2007 - Bituminous mixtures - Test method for hot mix asphalt - Part 2: Determination of particle size distribution
• Effective Date: 06-May-2015
• Merged Into: EN 12697-2:2015+A1:2019 - Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution
• Effective Date: 19-Jan-2023
• Amended By: EN 12697-2:2015/prA1 - Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution
• Effective Date: 12-Jul-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumenske zmesi - Preskusne metode - 2. del: Ugotavljanje zrnavostiAsphalt - Prüfverfahren - Teil 2: KorngrößenverteilungMélanges bitumineux - Méthode d'essai - Partie 2: GranulométrieBituminous mixtures - Test method - Part 2: Determination of particle size distribution93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 12697-2:2015SIST EN 12697-2:2015en,fr,de01-julij-2015SIST EN 12697-2:2015SLOVENSKI
STANDARDSIST EN 12697-2:2004+A1:20071DGRPHãþD



SIST EN 12697-2:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12697-2
April 2015 ICS 93.080.20 Supersedes EN 12697-2:2002+A1:2007English Version
Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution
Mélanges bitumineux - Méthode d'essai - Partie 2: Granulométrie
Asphalt - Prüfverfahren - Teil 2: Korngrößenverteilung This European Standard was approved by CEN on 19 March 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12697-2:2015 ESIST EN 12697-2:2015



EN 12697-2:2015 (E) 2 Contents Page Foreword .3 1 Scope .7 2 Normative references .7 3 Terms and definitions .7 4 Significance and use .7 5 Principle .8 6 Apparatus .8 7 Sample preparation .8 8 Procedure .8 9 Calculation .9 10 Report .9 11 Precision .9 Bibliography . 11
SIST EN 12697-2:2015



EN 12697-2:2015 (E) 3 Foreword This document (EN 12697-2:2015) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2015 and conflicting national standards shall be withdrawn at the latest by October 2015. Attention is drawn to the poss
...