Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-3:2011)

ISO 10893-3:2011 specifies requirements for automated full peripheral magnetic flux leakage testing of seamless and welded ferromagnetic steel tubes, with the exception of submerged arc-welded (SAW) tubes, for the detection of imperfections.
Unless otherwise specified in the purchase order, ISO 10893-3:2010 is applicable to the detection of predominantly longitudinal imperfections.
ISO 10893-3:2010 is applicable to the inspection of tubes with an outside diameter equal to or greater than 10 mm.
It can also be applicable to the testing of hollow sections.

Zerstörungsfreie Prüfung von Stahlrohren - Teil 3: Automatisierte Streuflussprüfung nahtloser und geschweißter (ausgenommen unterpulvergeschweißter) ferromagnetischer Stahlrohre über den gesamten Rohrumfang zum Nachweis von Unvollkommenheiten in Längs- und/oder Querrichtung (ISO 10893-3:2011)

Dieser Teil der ISO 10893 Norm legt die Anforderungen an die automatisierte Streuflussprüfung nahtloser und
geschweißter ferromagnetischer Stahlrohre — mit Ausnahme unterpulvergeschweißter (SAW-) Rohre — über
den gesamten Rohrumfang zum Nachweis von Unvollkommenheiten fest.
Wenn bei der Anfrage und Bestellung nichts anderes festgelegt wurde, gilt das Prüfverfahren für den
Nachweis vorwiegend in Längsrichtung orientierter Unvollkommenheiten.
Dieser Teil der ISO 10893 ist anwendbar für die Prüfung von Rohren mit einem Außendurchmesser ab
10 mm.
Dieses Dokument kann auch für die Prüfung von Hohlprofilen angewendet werden.

Essais non destructifs des tubes en acier - Partie 3: Contrôle automatisé par flux de fuite sur toute la circonférence des tubes en acier ferromagnétique sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) pour la détection des imperfections longitudinales et/ou transversales (ISO 10893-3:2011)

L'ISO 10893-3:2011 spécifie les exigences relatives au contrôle automatisé par flux magnétique de fuite sur toute la circonférence des tubes en aciers ferromagnétiques sans soudure et soudés, à l'exception des tubes soudés à l'arc immergé sous flux en poudre (SAW), pour la détection d'imperfections.
Sauf spécification contraire dans la commande, l'ISO 10893-3:2011 est applicable pour la détection des imperfections principalement longitudinales.
L'ISO 10893-3:2011 est applicable au contrôle de tubes dont le diamètre extérieur est égal ou supérieur à 10 mm.
Elle est également applicable au contrôle des profils creux.

Neporušitveno preskušanje jeklenih cevi - 3. del: Ugotavljanje prečnih/vzdolžnih napak po celotnem obodu feromagnetnih jeklenih cevi, nevarjenih in varjenih (razen obločno varjenih pod praškom), z avtomatsko preiskavo z magnetno sondo (ISO 10893-3:2011)

Ta del ISO 10893 določa zahteve za ugotavljanje prečnih/vzdolžnih napak po celotnem obodu feromagnetnih jeklenih cevi, nevarjenih in varjenih, razen cevi, obločno varjenih pod praškom (SAW), z avtomatsko preiskavo z magnetno sondo. Razen če je v dobavnici določeno drugače, ta del ISO 10893 velja predvsem za odkrivanje vzdolžnih napak. Velja za pregled cevi z zunanjim premerom, večjim ali enakim 10 mm. Ta del ISO 10893 lahko velja tudi za preskušanje votlih delov.

General Information

Status
Published
Publication Date
31-Mar-2011
Withdrawal Date
30-Oct-2011
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
01-Apr-2011
Completion Date
01-Apr-2011

Relations

Buy Standard

Standard
EN ISO 10893-3:2011
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10893-3:2011
01-november-2011
1DGRPHãþD
SIST EN 10246-4:2000
SIST EN 10246-5:2000
1HSRUXãLWYHQRSUHVNXãDQMHMHNOHQLKFHYLGHO8JRWDYOMDQMHSUHþQLKY]GROåQLK
QDSDNSRFHORWQHPRERGXIHURPDJQHWQLKMHNOHQLKFHYLQHYDUMHQLKLQYDUMHQLK
UD]HQREORþQRYDUMHQLKSRGSUDãNRP ]DYWRPDWVNRSUHLVNDYR]PDJQHWQRVRQGR
,62
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage
testing of seamless and welded (except submerged arc-welded) ferromagnetic steel
tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-
3:2011)
Zerstörungsfreie Prüfung von Stahlrohren - Teil 3: Automatisierte Streuflussprüfung
nahtloser und geschweißter (ausgenommen unterpulvergeschweißter) ferromagnetischer
Stahlrohre über den gesamten Rohrumfang zum Nachweis von Unvollkommenheiten in
Längs- und/oder Querrichtung (ISO 10893-3:2011)
Essais non destructifs des tubes en acier - Partie 3: Contrôle automatisé par flux de fuite
sur toute la circonférence des tubes en acier ferromagnétique sans soudure et soudés
(sauf à l'arc immergé sous flux en poudre) pour la détection des imperfections
longitudinales et/ou transversales (ISO 10893-3:2011)
Ta slovenski standard je istoveten z: EN ISO 10893-3:2011
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.040.20 Neporušitveno preskušanje Non-destructive testing of
kovin metals
SIST EN ISO 10893-3:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10893-3:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 10893-3:2011


EUROPEAN STANDARD
EN ISO 10893-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2011
ICS 23.040.10; 77.040.20; 77.140.75 Supersedes EN 10246-4:1999, EN 10246-5:1999
English Version
Non-destructive testing of steel tubes - Part 3: Automated full
peripheral flux leakage testing of seamless and welded (except
submerged arc-welded) ferromagnetic steel tubes for the
detection of longitudinal and/or transverse imperfections (ISO
10893-3:2011)
Essais non destructifs des tubes en acier - Partie 3: Zerstörungsfreie Prüfung von Stahlrohren - Teil 3:
Contrôle automatisé par flux de fuite sur toute la
Automatisierte Streuflussprüfung nahtloser und
circonférence des tubes en acier ferromagnétique sans geschweißter (ausgenommen unterpulvergeschweißter)
soudure et soudés (sauf à l'arc immergé sous flux en ferromagnetischer Stahlrohre über den gesamten
poudre) pour la détection des imperfections longitudinales Rohrumfang zum Nachweis von Unvollkommenheiten in
et/ou transversales (ISO 10893-3:2011) Längs- und/oder Querrichtung (ISO 10893-3:2011)
This European Standard was approved by CEN on 10 December 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10893-3:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10893-3:2011
EN ISO 10893-3:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10893-3:2011
EN ISO 10893-3:2011 (E)
Foreword
This document (EN ISO 10893-3:2011) has been prepared by Technical Committee ISO/TC 17 "Steel" in
collaboration with Technical Committee ECISS/TC 110 “Steel tubes, and iron and steel fittings” the secretariat
of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an ident
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.