CEN ISO/TS 80004-1:2015
(Main)Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS 80004-1:2015)
Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS 80004-1:2015)
ISO/TS 80004-1:2015 lists terms and definitions related to core terms in the field of nanotechnologies. It is intended to facilitate communications between organizations and individuals in industry and those who interact with them.
Nanotechnologien - Fachwörterverzeichnis - Teil 1: Kernbegriffe (ISO/TS 80004-1:2015)
Nanotechnologies - Vocabulaire - Partie 1: Termes "coeur" (ISO/TS 80004-1:2015)
ISO/TS 80004-1:2015 donne une liste de termes et de définitions liés aux termes « c?ur » dans le domaine des nanotechnologies. Elle est destinée à faciliter la communication entre différents organismes et membres de l'industrie, et leurs interlocuteurs.
Nanotehnologije - Slovar - 1. del: Temeljni izrazi (ISO/TS 80004-1:2015)
Ta del tehnične specifikacije ISO/TS 80004 navaja izraze in definicije v zvezi s temeljnimi izrazi na področju nanotehnologij. Namenjen je lajšanju komuniciranja med organizacijami in posamezniki v industriji ter osebami, ki stopajo v stike z njimi.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2016
1DGRPHãþD
SIST-TS CEN ISO/TS 80004-1:2015
Nanotehnologije - Slovar - 1. del: Temeljni izrazi (ISO/TS 80004-1:2015)
Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS 80004-1:2015)
Nanotechnologien - Fachwörterverzeichnis - Teil 1: Kernbegriffe (ISO/TS 80004-1:2015)
Nanotechnologies - Vocabulaire - Partie 1: Termes "coeur" (ISO/TS 80004-1:2015)
Ta slovenski standard je istoveten z: CEN ISO/TS 80004-1:2015
ICS:
01.040.07 Naravoslovne in uporabne Natural and applied sciences
vede (Slovarji) (Vocabularies)
07.120 Nanotehnologije Nanotechnologies
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
CEN ISO/TS 80004-1
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
December 2015
TECHNISCHE SPEZIFIKATION
ICS 07.030; 01.040.07 Supersedes CEN ISO/TS 80004-1:2014
English Version
Nanotechnologies - Vocabulary - Part 1: Core terms
(ISO/TS 80004-1:2015)
Nanotechnologies - Vocabulaire - Partie 1: Termes Nanotechnologien - Fachwörterverzeichnis - Teil 1:
"coeur" (ISO/TS 80004-1:2015) Kernbegriffe (ISO/TS 80004-1:2015)
This Technical Specification (CEN/TS) was approved by CEN on 14 October 2015 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 80004-1:2015 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (CEN ISO/TS 80004-1:2015) has been prepared by Technical Committee ISO/TC 229
"Nanotechnologies" in collaboration with Technical Committee CEN/TC 352 “Nanotechnologies” the
secretariat of which is held by AFNOR.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes CEN ISO/TS 80004-1:2014.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO/TS 80004-1:2015 has been approved by CEN as CEN ISO/TS 80004-1:2015 without any
modification.
TECHNICAL ISO/TS
SPECIFICATION 80004-1
Second edition
2015-12-01
Nanotechnologies — Vocabulary —
Part 1:
Core terms
Nanotechnologies — Vocabulaire —
Partie 1: Termes “coeur”
Reference number
ISO/TS 80004-1:2015(E)
©
ISO 2015
ISO/TS 80004-1:2015(E)
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved
ISO/TS 80004-1:2015(E)
Contents Page
Foreword .iv
Introduction .vi
1 Scope . 1
2 Terms and definitions . 1
Bibliography . 3
ISO/TS 80004-1:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: http://www.iso.org/iso/home/standards_development/
resources-for-technical-work/foreword.htm
The committee responsible for this document is ISO/TC 229, Nanotechnologies, and Technical Committee
IEC/TC 113, Nanotechnology standardization for electrical and electronic products and systems.
This second edition cancels and replaces the first edition (ISO/TS 80004-1:2010), which has been
technically revised.
Documents in the 80000 to 89999 range of reference numbers are developed by collaboration
between ISO and IEC.
ISO/TS 80004 consists of the following parts, under the general title Nanotechnologies — Vocabulary:
— Part 1: Core terms
— Part 2: Nano-objects
— Part 3: Carbon nano-objects
— Part 4: Nanostructured materials
— Part 5: Nano/bio interface
— Part 6: Nano-object characterization
— Part 7: Diagnostics and therapeutics for healthcare
— Part 8: Nanomanufacturing processes
The following parts are under preparation:
— Part 9: Nano-enabled electrotechnical products and systems
— Part 10: Nano-enabled photonic components and systems
— Part 11: Nanolayer, nanocoating, nanofilm, and related terms
iv © ISO 2015 – All rights reserved
ISO/TS 80004-1:2015(E)
— Part 12: Quantum phenomena in nanotechnology
— Part 13: Graphene and other two-dimensio
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.