Small craft - Hull construction and scantlings - Part 4: Workshop and manufacturing (ISO 12215-4:2002)

This part of ISO 12215 specifies workshop conditions, material storage and handling, and requirements for the manufacturing of the craft. It applies to small craft with a hull length ( LH) according to ISO 8666 of up to 24 m.
This part of ISO 12215 does not cover health and safety requirements.

Kleine Wasserfahrzeuge - Rumpfbauweise und Dimensionierung - Teil 4: Werkstatt und Fertigung (ISO 12215-4:2002)

Dieser Teil der Internationalen Norm betrifft Werkstattbedingungen, Lagerhaltung und Handhabung der Werkstoffe und die Verarbeitungsbedingungen bei der Bootsfertigung. Die Norm gilt für Boote mit einer Rumpflänge (LH) entsprechend ISO 8666 bis 24 m.
Diese Norm behandelt nicht Gesundheits- und Arbeitsschutz-Gesichtspunkte.
ANMERKUNG   Der Grund für die Erarbeitung dieser Internationalen Norm liegt darin, dass die Verarbeitungsbedingungen einen erheblichen Einfluss auf das Kurz- und Langzeitverhalten von kleinen Wasserfahrzeugen haben. Ferner basiert die Dimensionierung nach ISO 12215-5 darauf, das die Werkstatt- und Verarbeitungsbedingungen für die Fertigung angemessen sind.

Petits navires - Construction de coques et échantillons - Partie 4: Ateliers de construction et fabrication (ISO 12215-4:2002)

La présente partie de l'ISO 12215 spécifie, dans les ateliers de construction, les conditions de stockage et de maniement des matériaux, ainsi que des exigences relatives à la fabrication du bateau. Elle est applicable aux petits navires de longueur de coque ( LH ) inférieure ou égale à 24 m, conformément à l'ISO 8666.
La présente partie de l'ISO 12215 ne traite pas des exigences d'hygiène et de sécurité.

Mala plovila – Konstrukcija trupa in zahtevane lastnosti – 4. del:Izdelava (ISO 12215-4:2002)

General Information

Status
Withdrawn
Publication Date
30-Apr-2002
Withdrawal Date
25-Sep-2018
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
26-Sep-2018

Relations

Buy Standard

Standard
EN ISO 12215-4:2002
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12215-4:2002
01-december-2002
Mala plovila – Konstrukcija trupa in zahtevane lastnosti – 4. del:Izdelava (ISO
12215-4:2002)
Small craft - Hull construction and scantlings - Part 4: Workshop and manufacturing (ISO
12215-4:2002)
Kleine Wasserfahrzeuge - Rumpfbauweise und Dimensionierung - Teil 4: Werkstatt und
Fertigung (ISO 12215-4:2002)
Petits navires - Construction de coques et échantillons - Partie 4: Ateliers de construction
et fabrication (ISO 12215-4:2002)
Ta slovenski standard je istoveten z: EN ISO 12215-4:2002
ICS:
47.020.10 Ladijski trupi in njihovi Hulls and their structure
konstrukcijski elementi elements
47.080 ýROQL Small craft
SIST EN ISO 12215-4:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 12215-4:2002

---------------------- Page: 2 ----------------------

SIST EN ISO 12215-4:2002
EUROPEAN STANDARD
EN ISO 12215-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2002
ICS 47.080
English version
Small craft - Hull construction and scantlings - Part 4: Workshop
and manufacturing (ISO 12215-4:2002)
Petits navires - Construction de coques et échantillons - Kleine Wasserfahrzeuge - Rumpfbauweise und
Partie 4: Ateliers de construction et fabrication (ISO 12215- Dimensionierung - Teil 4: Werkstatt und Fertigung (ISO
4:2002) 12215-4:2002)
This European Standard was approved by CEN on 1 May 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12215-4:2002 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 12215-4:2002
EN ISO 12215-4:2002 (E)
CORRECTED  2002-07-10
Foreword
This document (ISO 12215-4:2002) has been prepared by Technical Committee ISO/TC 188
"Small craft", the secretariat of which is held by CMC.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by November 2002, and conflicting
national standards shall be withdrawn at the latest by November 2002.
This document has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements
of EU Directive(s).
For relationship with EU Directive(s), see informative annex ZB, which is an integral part of
this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the
United Kingdom.
Endorsement notice
The text of the International Standard ISO 12215-4:2002 has been approved by CEN as a
European Standard without any modifications.
NOTE Normative references to International Standards are listed in annex ZA (normative).
2

---------------------- Page: 4 ----------------------

SIST EN ISO 12215-4:2002
EN ISO 12215-4:2002 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions
of any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications,
indicated by (mod.), the relevant EN/HD applies.
Publication Year
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.