EN 29775:1993

Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power (ISO 9775:1990)

Specifies requirements and test methods for remote push-pull cable steering systems and their major component items, used for small craft with a single outboard motor of 15 kW to 40 kW power. Includes definitions, installation, test requirements, as-installed tests, component tests and outboard motor requirements. Components and functional details are given in figures.

Kleine Wasserfahrzeuge - Steueranlagen für Einzel-Außenbordmotoren mit einer Leistung von 15 kW bis 40 kW (ISO 9775:1990)

Navires de plaisance - Appareils à gouverner commandés à distance pour moteurs hors-bord uniques de puissance comprise entre 15 kW et 40 kW (ISO 9775:1990)

La présente Norme internationale spécifie les caractéristiques exigées et prescrit les méthodes d'essai des appareils à gouverner commandés à distance, à transmission par câbles va-et-vient («push-pull»), et de leurs principaux éléments constitutifs, installés sur des navires de plaisance à un seul moteur hors-bord dont la puissance est comprise entre 15 kW et 40 kW.

Mala plovila - Daljinski sistemi krmiljenja za enojne izvenkrmne motorje z močjo od 15 kW do 40 kW (ISO 9775:1990)

General Information

• Status: Withdrawn
• Publication Date: 30-Aug-1993
• Withdrawal Date: 22-Aug-2017
• ICS: 47.020.20 - Marine engines and propulsion systems
• ICS: 47.080 - Small craft
• Technical Committee: CEN/SS T01 - Shipbuilding and maritime structures
• Drafting Committee: CEN/SS T01 - Shipbuilding and maritime structures
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 23-Aug-2017
• Directive: 2003/44/EC - Approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft
• Directive: 2013/53/EU - Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC
• Directive: 94/25/EC - Directive 94/25/EC of the European Parliament and of the Council of 16 June 1994 on the approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft
• Mandate: M/075 - Revised mandate to CEN for standardization in the field of recreational craft
• Ref Project: SIST EN 29775:2000 - Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power (ISO 9775:1990)

Relations

• Replaced By: EN ISO 9775:2017 - Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power (ISO 9775:1990)
• Effective Date: 15-Jun-2016
• Amended By: EN 29775:1993/A1:2000 - Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power (ISO 9775:1990)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kleine Wasserfahrzeuge - Steueranlagen für Einzel-Außenbordmotoren mit einer Leistung von 15 kW bis 40 kW (ISO 9775:1990)Navires de plaisance - Appareils a gouverner commandés a distance pour moteurs hors-bord uniques de puissance comprise entre 15 kW et 40 kW (ISO 9775:1990)Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power (ISO 9775:1990)47.080ýROQLSmall craft47.020.70Navigacijska in krmilna opremaNavigation and control equipmentICS:Ta slovenski standard je istoveten z:EN 29775:1993SIST EN 29775:2000en01-april-2000SIST EN 29775:2000SLOVENSKI
STANDARD



SIST EN 29775:2000



SIST EN 29775:2000



SIST EN 29775:2000



SIST EN 29775:2000



SIST EN 29775:2000



INTERNATIONAL STANDARD First edi tion 1990-12-15 Small traft - Remote steering Systems for Single outboard motors of 15 kW to 40 kW power Navires de plaisance - Appareils 6 gouverner commandes ZI distance pour moteurs hors-hord uniques de puissarice comprise entre 15 kW et 40 kW -- ---- ____-__-- -----.------------ P-e--.-____ Reference number ISO 9775: 199O(E) SIST EN 29775:2000



ISO 9775:1990(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of preparing international Standards is normally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, govern- mental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an Inter- national Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 9775 was prepared by Technical Committee ISO/TC 188, Small traft. NOTE 1 This International Standard specifies requirements and test methods for remote steering Systems as cited in clause 1. They are thus more speciaiized requirements than those given in a parallel document, ISO 8848, Smaii traft -- Remote steering Systems. 0 ISO 1990 All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronie or mechanical, including photocopying and microfilm, without Permission in writing from the publisher. International Organization for Standardiz ation Case Postale 56 l CH-121 1 Geneve 20 l Switzerland Printed in Switzerland ii SIST EN 29775:2000



_---- __ - INTERNATIONAL STANDARD ISO 9775:1996(E) Small traft - Remote steering Systems for Single outboard motors of 15 kW to 40 kW power 1 Scope This International Standard specifies requirements and test methods for remote push-pull cable steer- ing Systems and their major component items, used for small traft with a Single outboard motor of 15 kW to 40 kW power. 2 Definitions For the purposes of this International Standard, the following definitions apply. 2.1 steering System: Assembly including all com- ponents necessary to transmit remote manual effort to the outboard motor. 2,2 boat-mounted steering System: System in which an output ram guide tube is secured to the boat. 2.3 motor-mounted steering System: System in which an output ram guide tube is secured to the engine. 2.4 drag link: Device in a motor-mounted steering System by which the linear forte of the output ram is transmitted to the motor steering arm. 2.5 helm: Mechanism, exclusive of a steering- wheel or other means for manual application of controlling forte, by which controlling forte is fed into a steering System cable or other force- transmission means. 2.6 minimum retained System Performance: System capability after test(s) such that at least 90 % of the steering arc normally available each side of the mid-Position may be obtained by exertion of no more than 27 Nm of torque at the helm, through the wheel or other normal control. This criterion does not define steering System per- formante while a boat is underway but is intended to provide quantitative limits for design and test purposes. 3 General requirements 3.1 When steering Systems are factory-installed in the boat, the complete System shall be supplied. In outboard motor-boats, the System shall be supplied complete to the interface point at the ram output end as shown in figure 1. SIST EN 29775:2000



ISO 9775:1990(E) Dimensions in miilimetres 430 (at mid-travel Position) 300 min. C 12,7max. Fiat 10,7min. * L Tube0 15,75 + O,i3 Interface Point --/ \ Coupler nut 7/8-14 UNF-2B thread (optional for boat-mounted Systems) NOTE - Minimum travel : 100 mm each side of mid-travel Position; maximum travel : 115 mm each
...