iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1504-10:2003

(Main)

Products and systems for the protection and repair of concrete structures - Definitions - Requirements - Quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works

Products and systems for the protection and repair of concrete structures - Definitions - Requirements - Quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works

This part of EN 1504 gives requirements for substrate condition before and during application including structural stability, storage, the preparation and application of products and systems for the protection and repair of concrete structures including quality control, maintenance, health and safety, and the environment.

Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Definitionen, Anforderungen, Qualitätsüberwachung und Beuteilung der Konformität - Teil 10: Anwendung von Produkten und Systemen auf der Baustelle, Qualitätsüberwachung der Ausführung

Diese Europäische Norm enthält Anforderungen an den Zustand des Substrats vor und während des Aufbringens einschließlich der Stabilität der Konstrutkion, die Lagerung, Vorbereitung und Aufbringung der Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken einschließlich Qualitätsüberwachung, Instandhaltung, Gesundheit, Sicherheit und Umweltschutz.

Produits et systèmes pour la protection et la réparation de structures en béton - Définitions, prescriptions, maîtrise de la qualité et évaluation de la conformité - Partie 10: Application sur site des produits et systèmes et contrôle de la qualité des travaux

La présente norme européenne définit les exigences relatives à l'état du support avant et pendant l'application, y compris la stabilité de la structure, le stockage, la préparation et l'application des produits et systèmes de protection et de réparation des structures en béton, ainsi que le contrôle de la qualité, la maintenance, la santé et la sécurité, et l'environnement.

Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij – Definicije – Zahteve - Kontrola kakovosti in ovrednotenje skladnosti – 10. del: Uporaba proizvodov in sistemov na terenu in kontrola kakovosti del

General Information

Status
Withdrawn
Publication Date
16-Dec-2003
Withdrawal Date
10-Oct-2017
ICS
01.040.91 - Construction materials and building (Vocabularies)
91.080.40 - Concrete structures
Technical Committee
CEN/TC 104 - Concrete ( performance, production, placing and compliance criteria )
Drafting Committee
CEN/TC 104/SC 8/WG 9 - Site application of products and systems for the protection and repair of concrete structures
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
11-Oct-2017
Ref Project
SIST EN 1504-10:2004 - Products and systems for the protection and repair of concrete structures - Definitions - Requirements - Quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works

Relations

Replaced By
EN 1504-10:2017 - Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works
Effective Date
18-Oct-2017
Corrected By
EN 1504-10:2003/AC:2005 - Products and systems for the protection and repair of concrete structures - Definitions - Requirements - Quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works
Effective Date
08-Jun-2022

Buy Standard

EN 1504-10:2004EN 1504-10:2004
PreviousNext
Standard
EN 1504-10:2004
English language
61 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Definitionen, Anforderungen, Qualitätsüberwachung und Beuteilung der Konformität - Teil 10: Anwendung von Produkten und Systemen auf der Baustelle, Qualitätsüberwachung der AusführungProduits et systemes pour la protection et la réparation de structures en béton - Définitions, prescriptions, maîtrise de la qualité et évaluation de la conformité - Partie 10: Application sur site des produits et systemes et contrôle de la qualité des travauxProducts and systems for the protection and repair of concrete structures - Definitions - Requirements - Quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works91.080.40Betonske konstrukcijeConcrete structures01.040.91Gradbeni materiali in gradnja (Slovarji)Construction materials and building (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 1504-10:2003SIST EN 1504-10:2004en01-april-2004SIST EN 1504-10:2004SLOVENSKI
STANDARD



SIST EN 1504-10:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1504-10December 2003ICS 91.080.40; 01.040.91English versionProducts and systems for the protection and repair of concretestructures - Definitions - Requirements - Quality control andevaluation of conformity - Part 10: Site application of productsand systems and quality control of the worksProduits et systèmes pour la protection et la réparation destructures en béton - Définitions, prescriptions, maîtrise dela qualité et évaluation de la conformité - Partie 10:Application sur site des produits et systèmes et contrôle dela qualité des travauxProdukte und Systeme für den Schutz und dieInstandsetzung von Betontragwerken - Definitionen,Anforderungen, Qualitätsüberwachung und Beuteilung derKonformität - Teil 10: Anwendung von Produkten undSystemen auf der Baustelle, Qualitätsüberwachung derAusführungThis European Standard was approved by CEN on 28 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1504-10:2003: ESIST EN 1504-10:2004



EN 1504-10:2003 (E)2ContentsPage1Scope.62Normative references.63Terms and definitions.94Structural stability during preparation, protection and repair.125General requirements.126Methods of protection and repair.127Preparation of substrate.217.1General.217.2Preparation of concrete.237.2.1General.237.2.2Cleaning.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1504-9:2008(Main)
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems
SIST EN 1504-9:2008

This Part of EN 1504 sets out basic considerations for specification of protection and repair of reinforced and unreinforced concrete structures (including, for example, pavements, runways, floor slabs and pre-stressed structures) using products and systems specified in other Parts of the EN 1504 series or any other relevant European Standard or European Technical Approval. This European Standard covers atmospherically exposed, buried and submerged structures.
This European Standard includes:
a)   the need for inspection, testing and assessment before and after repair;
b)   protection from causes of defects and their repair in concrete structures. Causes of such defects may include:
1)   mechanical actions, e.g. impact, overloading, movement caused by settlement, blast, vibration and seismic actions;
2)   chemical and biological actions from environments, e.g. sulphate attack, alkali aggregate reaction;
3)   physical actions, e.g. freeze-thaw, thermal cracking, moisture movement, salt crystallisation and erosion;
4)   fire damage;
5)   reinforcement corrosion resulting from:
i)   physical loss of the protective concrete cover;
ii)   chemical loss of alkalinity in the protective concrete cover as a result of reaction with atmospheric carbon dioxide (carbonation);
iii)   chloride (or other chemical) contamination of the concrete;
iv)   stray electrical currents conducted or induced in the reinforcement from neighbouring electrical installations.
c)   repair of defects caused by inadequate design, specification or construction or use of unsuitable construction materials;
d)   providing the required structural capacity by:
1)   replacement or addition of embedded or external reinforcement;
2)   filling of cracks and voids within or between elements to ensure structural continuity;
3)   replacement or addition of concrete or whole elements;
e)   waterproofing as an integral part of protection and repair;
[...].

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1504-3:2005(Main)
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair
SIST EN 1504-3:2006

This European Standard specifies requirements for the identification, performance (including durability) and safety of products and systems to be used for the structural and non-structural repair of concrete structures.
This European Standard covers repair mortars and concretes, possibly used in conjunction with other products and systems, to restore and/or to replace defective concrete and to protect reinforcement, necessary to extend the service life of a concrete structure exhibiting deterioration. The fields of application covered are in accordance with ENV 1504-9 as follows:

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1504-1:2005(Main)
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions
SIST EN 1504-1:2005

This European Standard defines terms relating to products and systems for repair, for use in maintenance and protection, restoration and strengthening of concrete structures.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    9 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1504-2:2004(Main)
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
SIST EN 1504-2:2004

This Part of prEN 1504 specifies requirements for the identification, performance (including durability aspects), safety and evaluation of conformity of products and systems to be used for surface protection of concrete, to increase the durability of concrete and reinforced concrete structures, as well as for new concrete and for maintenance and repair work.
The surface protective methods covered by this standard are the following:
-   hydrophobic impregnation;
-   impregnation;
-   coating.
Flooring systems in buildings which are not intended to protect or reinstate the integrity of a concrete structure are standardised in EN 13813.
When products and systems complying with this standard are used in flooring applications that involve substantial mechanical loading , they should also satisfy the requirements of EN 13813.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 1504-3(Main)
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair
oSIST prEN 1504-3:2015

Characteristics relevant to mechanical resistance and stability are: shrinkage, permeability to gases, capillarity absorption, diffusion of chloride ions, resistance to carbonation, thermal compatibility, adhesion. Characteristics relevant to safety in case of fire.

  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1504-9:2008(Main)
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems
SIST EN 1504-9:2008

This Part of EN 1504 sets out basic considerations for specification of protection and repair of reinforced and unreinforced concrete structures (including, for example, pavements, runways, floor slabs and pre-stressed structures) using products and systems specified in other Parts of the EN 1504 series or any other relevant European Standard or European Technical Approval. This European Standard covers atmospherically exposed, buried and submerged structures.
This European Standard includes:
a)   the need for inspection, testing and assessment before and after repair;
b)   protection from causes of defects and their repair in concrete structures. Causes of such defects may include:
1)   mechanical actions, e.g. impact, overloading, movement caused by settlement, blast, vibration and seismic actions;
2)   chemical and biological actions from environments, e.g. sulphate attack, alkali aggregate reaction;
3)   physical actions, e.g. freeze-thaw, thermal cracking, moisture movement, salt crystallisation and erosion;
4)   fire damage;
5)   reinforcement corrosion resulting from:
i)   physical loss of the protective concrete cover;
ii)   chemical loss of alkalinity in the protective concrete cover as a result of reaction with atmospheric carbon dioxide (carbonation);
iii)   chloride (or other chemical) contamination of the concrete;
iv)   stray electrical currents conducted or induced in the reinforcement from neighbouring electrical installations.
c)   repair of defects caused by inadequate design, specification or construction or use of unsuitable construction materials;
d)   providing the required structural capacity by:
1)   replacement or addition of embedded or external reinforcement;
2)   filling of cracks and voids within or between elements to ensure structural continuity;
3)   replacement or addition of concrete or whole elements;
e)   waterproofing as an integral part of protection and repair;
[...].

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1504-3:2005(Main)
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair
SIST EN 1504-3:2006

This European Standard specifies requirements for the identification, performance (including durability) and safety of products and systems to be used for the structural and non-structural repair of concrete structures.
This European Standard covers repair mortars and concretes, possibly used in conjunction with other products and systems, to restore and/or to replace defective concrete and to protect reinforcement, necessary to extend the service life of a concrete structure exhibiting deterioration. The fields of application covered are in accordance with ENV 1504-9 as follows:

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1504-1:2005(Main)
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions
SIST EN 1504-1:2005

This European Standard defines terms relating to products and systems for repair, for use in maintenance and protection, restoration and strengthening of concrete structures.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    9 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1504-2:2004(Main)
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
SIST EN 1504-2:2004

This Part of prEN 1504 specifies requirements for the identification, performance (including durability aspects), safety and evaluation of conformity of products and systems to be used for surface protection of concrete, to increase the durability of concrete and reinforced concrete structures, as well as for new concrete and for maintenance and repair work.
The surface protective methods covered by this standard are the following:
-   hydrophobic impregnation;
-   impregnation;
-   coating.
Flooring systems in buildings which are not intended to protect or reinstate the integrity of a concrete structure are standardised in EN 13813.
When products and systems complying with this standard are used in flooring applications that involve substantial mechanical loading , they should also satisfy the requirements of EN 13813.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 1504-3(Main)
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair
oSIST prEN 1504-3:2015

Characteristics relevant to mechanical resistance and stability are: shrinkage, permeability to gases, capillarity absorption, diffusion of chloride ions, resistance to carbonation, thermal compatibility, adhesion. Characteristics relevant to safety in case of fire.

  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day