Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material (ISO 3233-3:2015)

ISO 3233-3:2015 a simple practical method for calculating the non-volatile matter by volume, NVV, of a coating material from the non-volatile-matter content, NV, the density of the coating material, and the density of the solvents. Using the non-volatile matter by volume results and the density obtained in accordance with this part of ISO 3233, it is possible to calculate the theoretical spreading rate of a coating material.
ISO 3233-3:2015 is not applicable to coating materials which exceed the critical pigment volume concentration (CPVC).

Beschichtungsstoffe - Bestimmung des Volumens nichtflüchtiger Anteile - Teil 3: Bestimmung durch Berechnung des nach ISO 3251 bestimmten Gehaltes an nichtflüchtigen Anteilen, der Dichte des Beschichtungsstoffes und der Dichte des Lösemittels im Beschichtungsstoff (ISO 3233-3:2015)

Dieser Teil von ISO 3233 legt ein einfaches praxisnahes Verfahren zum Berechnen des Volumens nichtflüchtiger Anteile, VnfA, eines Beschichtungsstoffes aus dem Gehalt an nichtflüchtigen Anteilen, nfA, der Dichte des Beschichtungsstoffes und der Dichte der Lösemittel fest. Mit dem Ergebnis der Bestimmung des Volumens nichtflüchtiger Anteile und der nach diesem Teil von ISO 3233 Norm bestimmten Dichte ist es möglich, die theoretische Ergiebigkeit eines Beschichtungsstoffes zu berechnen.
Dieser Teil von ISO 3233 ist nicht anwendbar für Beschichtungsstoffe, die die kritische Pigmentvolumen¬kon¬zen-tration (KPVK) überschreiten.

Peintures et vernis - Détermination du pourcentage en volume de matière non volatile - Partie 3: Détermination par calcul à partir de la teneur en matière non volatile déterminée conformément à l'ISO 3251, de la masse volumique du produit de peinture et de la masse volumique du solvant du produit de peinture (ISO 3233-3:2015)

ISO 3233-3:2015 spécifie une méthode pratique et simple de calcul du pourcentage en volume de matières non volatiles, NVV, dans un produit de peinture à partir de la teneur en matières non volatiles, NV, de la masse volumique du produit de peinture et de la masse volumique des solvants. Les valeurs de pourcentage en volume de matières non volatiles et de masse volumique obtenues par la présente partie de l'ISO 3233 permettent de calculer le rendement d'application théorique du produit de peinture.
ISO 3233-3:2015 n'est pas applicable aux produits de peinture dépassant la concentration pigmentaire volumique critique (CPVC).

Barve in laki - Določevanje prostorninskega deleža nehlapnih snovi - 3. del: Določevanje z računanjem iz deleža nehlapnih snovi, določenih v skladu z ISO 3251, gostote premazov ter gostote topila v premazih (ISO 3233-3:2015)

Ta del standarda ISO 3233 predstavlja preprosto praktično metodo za izračun prostorninskega deleža nehlapnih snovi, NVV, premazov iz deleža nehlapnih snovi, NV, gostote premaza in gostote topila. Z gostoto in rezultati prostorninskega deleža nehlapnih snovi, ki so pridobljeni v skladu s tem delom standarda ISO 3233, je mogoče izračunati teoretično hitrost nanašanja premaza.
Ta del standarda ISO 3233 se ne uporablja za premaze, v katerih je presežena kritična koncentracija prostornine pigmenta (CPVC).

General Information

Status
Published
Publication Date
26-May-2015
Withdrawal Date
29-Nov-2015
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
27-May-2015
Completion Date
27-May-2015

Relations

Buy Standard

Standard
EN ISO 3233-3:2015
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3233-3:2015
01-september-2015
1DGRPHãþD
SIST EN ISO 23811:2009
%DUYHLQODNL'RORþHYDQMHSURVWRUQLQVNHJDGHOHåDQHKODSQLKVQRYLGHO
'RORþHYDQMH]UDþXQDQMHPL]GHOHåDQHKODSQLKVQRYLGRORþHQLKYVNODGX],62
JRVWRWHSUHPD]RYWHUJRVWRWHWRSLODYSUHPD]LK ,62
Paints and varnishes - Determination of the percentage volume of non-volatile matter -
Part 3: Determination by calculation from the non-volatile-matter content determined in
accordance with ISO 3251, the density of the coating material and the density of the
solvent in the coating material (ISO 3233-3:2015)
Beschichtungsstoffe - Bestimmung des Volumens nichtflüchtiger Anteile - Teil 3:
Bestimmung durch Berechnung des nach ISO 3251 bestimmten Gehaltes an
nichtflüchtigen Anteilen, der Dichte des Beschichtungsstoffes und der Dichte des
Lösemittels im Beschichtungsstoff (ISO 3233-3:2015)
Peintures et vernis - Détermination du pourcentage en volume de matière non volatile -
Partie 3: Détermination par calcul à partir de la teneur en matière non volatile déterminée
conformément à l'ISO 3251, de la masse volumique du produit de peinture et de la
masse volumique du solvant du produit de peinture (ISO 3233-3:2015)
Ta slovenski standard je istoveten z: EN ISO 3233-3:2015
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 3233-3:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3233-3:2015

---------------------- Page: 2 ----------------------

SIST EN ISO 3233-3:2015

EUROPEAN STANDARD
EN ISO 3233-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2015
ICS 87.040 Supersedes EN ISO 23811:2009
English Version
Paints and varnishes - Determination of the percentage volume
of non-volatile matter - Part 3: Determination by calculation from
the non-volatile-matter content determined in accordance with
ISO 3251, the density of the coating material and the density of
the solvent in the coating material (ISO 3233-3:2015)
Peintures et vernis - Détermination du pourcentage en Beschichtungsstoffe - Bestimmung des Volumens
volume de matière non volatile - Partie 3: Détermination par nichtflüchtiger Anteile - Teil 3: Bestimmung durch
calcul à partir de la teneur en matière non volatile Berechnung des nach ISO 3251 bestimmten Gehaltes an
déterminée conformément à l'ISO 3251, de la masse nichtflüchtigen Anteilen, der Dichte des
volumique du produit de peinture et de la masse volumique Beschichtungsstoffes und der Dichte des Lösemittels im
du solvant du produit de peinture (ISO 3233-3:2015) Beschichtungsstoff (ISO 3233-3:2015)
This European Standard was approved by CEN on 24 January 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3233-3:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 3233-3:2015
EN ISO 3233:2015 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 3233-3:2015
EN ISO 3233:2015 (E)
Foreword
This document (EN ISO 3233-3:2015) has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at th
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.