iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

CR 12349:1996

(Main)

Mechanical vibration - Guide to the health effects of vibration on the human body

Mechanical vibration - Guide to the health effects of vibration on the human body

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

Mechanische Schwingungen - Leitfaden über die Wirkung von Schwingungen auf die Gesundheit des Menschen

Vibrations mécaniques - Guide concernant les effets des vibrations sur la santé du corps humain

Mechanical vibration - Guide to the health effects of vibration on the human body

General Information

Status
Withdrawn
Publication Date
18-Jun-1996
Withdrawal Date
01-Aug-2023
ICS
13.160 - Vibration and shock with respect to human beings
Technical Committee
CEN/TC 231 - Mechanical vibration and shock
Drafting Committee
CEN/TC 231/WG 5 - Vibration effects
Current Stage
Ref Project
SIST CR 12349:2000 - Mechanical vibration - Guide to the health effects of vibration on the human body

Relations

Replaced By
CEN/TR 12349:2023 - Mechanical vibration - Guide to the health effects of vibration on the human body
Effective Date
23-Feb-2022

Buy Standard

CR 12349:2000CR 12349:2000
PreviousNext
Standardization document
CR 12349:2000
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST CR 12349:2000
01-december-2000
Mechanical vibration - Guide to the health effects of vibration on the human body
Mechanical vibration - Guide to the health effects of vibration on the human body
Mechanische Schwingungen - Leitfaden über die Wirkung von Schwingungen auf die
Gesundheit des Menschen
Vibrations mécaniques - Guide concernant les effets des vibrations sur la santé du corps
humain
Ta slovenski standard je istoveten z: CR 12349:1996
ICS:
13.160 Vpliv vibracij in udarcev na Vibration and shock with
ljudi respect to human beings
SIST CR 12349:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST CR 12349:2000

---------------------- Page: 2 ----------------------

SIST CR 12349:2000

---------------------- Page: 3 ----------------------

SIST CR 12349:2000

---------------------- Page: 4 ----
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
SIST-TP CEN/TR 12349:2023

The aim of this document is to provide information on the possible adverse health effects caused by exposure to vibration at work. The report addresses manufacturers, companies which introduce machinery on the EU market as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.
This document is limited to the effects on health and does not cover the potential effects of vibration on comfort, human performance, or vibration perception. Most of the information on whole-body vibration in this document is based upon data available from research on human response to vibration of seated persons. There are only few data on the effects of vibration on persons in standing, reclining or recumbent positions.
The information on both hand-transmitted vibration and whole-body vibration is based upon data from laboratory research on acute effects as well as upon data from epidemiologic field-studies at workplaces.
Additional information can be obtained from the scientific literature.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10819:2013/A2:2022(Amendment)
Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand - Amendment 2 (ISO 10819:2013/Amd 2:2021)
SIST EN ISO 10819:2013/A2:2022

2021-10-04 - publication on hold - Received lack of compliance at Enquiry stage.
2021-08-24 - publication on hold - TC decision is missing to skip FV. 2021-10-04 decision received.

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 28927-13:2022(Main)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 13: Fastener driving tools (ISO 28927-13:2022)
SIST EN ISO 28927-13:2022

This document specifies a laboratory method for measuring the vibration at the handle of fastener driving tools. It is a type test procedure for establishing the vibration value on the handle of a hand-held power tool operating under a specified load.
This document is applicable to fastener driving tools driven pneumatically or by other means, using nails, staples or pins.
This document is applicable to tools with single sequential actuation, contact actuation, contact actuation with automatic reversion or continual contact actuation (see Figures 1 to 3).
This document is not applicable to tools operating in full sequential mode due to their much longer intervals in between individual actuations. However, to provide an indication for comparison of different tools of this type (see Figures 4 and 5), Annex C provides informative guidance.
NOTE       Today current knowledge does not allow any conclusions regarding physiological and pathological effects between isolated shocks and continuous shock sequences, and their repetition rates.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8041-2:2021(Main)
Human response to vibration - Measuring instrumentation - Part 2: Personal vibration exposure meters (ISO 8041-2:2021)
SIST EN ISO 8041-2:2021

This document specifies minimum requirements for personal vibration exposure meters (PVEM).
This document is applicable to instruments designed for measurements of whole-body vibration in the context of industrial hygiene applications (according to ISO 2631-1, ISO 2631-2 and ISO 2631-4) and/or hand-arm vibration (according to ISO 5349-1) together with the associated exposure times.
This document provides specified design goals and permitted tolerances that define the minimum performance capabilities and functional requirements of instruments designed to measure personal daily vibration exposure.
This document does not apply to instruments designed to measure or log exposure times without also performing vibration measurement. Instrumentation of this type is described in ISO/TR 19664.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 15350:2020(Main)
Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery
SIST-TP CEN/TR 15350:2020

This document gives guidelines for estimating and documenting the daily vibration exposure due to the use of hand-held power tools and hand-guided machines, in relation to the requirements of the European Physical Agents Directive (vibration) 2002/44/EC. This document is addressed to competent services for the assessment of vibration exposure at the workplace and to national authorities and industrial organizations.
The methods in this document are based on the requirements and guidance given in EN ISO 5349 1 and EN ISO 5349 2 but instead of measuring the vibration magnitudes at the specific workplaces, the methods in this document use existing vibration values from other sources of information including those provided by the manufacturers of the machinery in relation to the requirements of the Machinery Directive 2006/42/EC.
This document gives guidance on how to estimate the exposure time and the daily vibration exposure A(8) as defined in EN ISO 5349 1. It also offers a simple method for estimating the daily vibration exposure by means of a table which indicates the vibration exposure as a function of the equivalent vibration total value and the associated exposure time. Both methods can be used even in cases of multiple exposures on the same day.

  • Technical report
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17506:2020(Main)
Guidance on databases for human vibration
SIST-TP CEN/TR 17506:2020

The purpose of this document is to give guidelines for elaborating databases on human vibration for different purposes (emission or immission) and types of exposure (hand-arm vibration or whole-body vibration).
This document is restricted to cases where vibration affects persons at work. It is mainly addressed to competent services for the assessment of vibration exposure at the workplace and to national authorities and industrial organizations.
It defines basic requirements to get databanks respecting quality criteria (information to be given regarding exposure, reference standards, machines, persons, key parts, data origin and traceability) taken into account the type of exposure (HAV, WBV).
Although this document has been mainly designed to facilitate the exchange of data between experts, a section explains the minimum information to be provided and precautions to be taken for databases opened to public. The way the data should be formatted to facilitate the exchange between developers of databases is covered.
Also this document provides proper terminology to qualify the different families of vibration sources e.g. tools, machines and working conditions (see Annex B). This document provides a method for classifying the quality of vibration data.

  • Technical report
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 28927-1:2019(Main)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2019)
SIST EN ISO 28927-1:2020

This document specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held power-driven angle and vertical grinders. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine fitted with a specified test wheel and run under no‑load conditions. The method has been established for surface grinding tasks only. Cutting and sanding generally create lower vibrations. It is intended that the results be used to compare different models of the same type of machine.
This document is applicable to hand-held machines (see Clause 5), driven pneumatically or by other means, intended for grinding, cutting-off and rough sanding, with bonded, coated and super-abrasive products and with wire brushes for use on all kinds of materials. It is not applicable to die grinders or straight grinders.
NOTE    To avoid confusion with the terms "power tool" and "inserted tool", machine is used for the former throughout this document.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 28927-8:2009/A2:2019(Amendment)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action - Amendment 2: Oscillating knives (vibrating screen removal tools) (ISO 28927-8:2009/Amd 2:2019)
SIST EN ISO 28927-8:2010/A2:2019
  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10819:2013/A1:2019(Amendment)
Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand - Amendment 1 (ISO 10819:2013/Amd 1:2019)
SIST EN ISO 10819:2013/A1:2019
  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 28927-4:2010/A1:2018(Amendment)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010/Amd 1:2017)
SIST EN ISO 28927-4:2011/A1:2019

2018-12-13 JF:Through Decision BT 177/2018, the BT approved the revised Annex ZA. CCMC will proceed with publication.
2017-08-28: publication on hold due to missing assessment
2018-03-23 JF: Annex ZA not in line with CEN Guide 414. CCMC is examining with the TC and the NAC  which actions are required
2018-07-02 JF: TC revised Annex ZA in line with the CEN Guide 414 and EC expectations. CCMC requested the Consutlant's assessment of the revised Annex ZA with the indicative deadline of 20180808.
2018-11-07 JF: positive Consultant's assessment on Annex ZA. CCMC is preparing a BT document for approval of a revised Annex ZA.
2018-08-08 JF: revised Annex ZA was positively assessed by the Consultant. CCMC is preparing a BT document  for decision about the incorporation of the Annex ZA into the draft standard and its publication,

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day