EN ISO 4063:2023
(Main)Welding, brazing, soldering and cutting - Nomenclature of processes and reference numbers (ISO 4063:2023)
Welding, brazing, soldering and cutting - Nomenclature of processes and reference numbers (ISO 4063:2023)
This document establishes a nomenclature for:
— welding;
— brazing, soldering and weld brazing;
— thermal cutting;
with each process identified by a reference number.
It covers the main processes (one digit), groups (two digits) and sub-groups (three digits). The reference number for any process has a maximum of three digits. This system is intended as an aid in computerization and the drafting of, for example, drawings, working papers and welding procedure specifications, and enables the uniform international designation of the processes.
This document does not cover all process variants. The process numbers can be supplemented with additional information for variants not listed.
Schweißen, Hartlöten, Weichlöten und Schneiden - Liste der Prozesse und Ordnungsnummern (ISO 4063:2023)
Dieses Dokument legt eine Nomenklatur fest für:
Schweißen,
Hartlöten, Weichlöten und Fugenlöten,
thermisches Schneiden,
wobei jedes Verfahren durch eine Ordnungsnummer gekennzeichnet ist.
Es umfasst die Hauptprozesse (einstellig), Gruppen (zweistellig) und Untergruppen (dreistellig). Die Ordnungsnummern für jeden Prozess sind höchstens dreistellig. Dieses System ist als Hilfsmittel für die Computerisierung und die Erstellung von z. B. Zeichnungen, Arbeitspapieren und Schweißanweisungen gedacht und ermöglicht eine einheitliche internationale Bezeichnung der Prozesse.
Dieses Dokument deckt nicht alle Prozessvarianten ab. Für nicht aufgeführte Varianten können die Ordnungsnummern mit zusätzlichen Informationen ergänzt werden.
Soudage, brasage et coupage - Nomenclature et numérotation des procédés (ISO 4063:2023)
Le présent document établit une nomenclature, pour:
— le soudage;
— le brasage fort, le brasage tendre et le soudobrasage;
— le coupage thermique;
chaque procédé étant identifié par un numéro de référence.
Il couvre les groupes principaux procédés (un chiffre), les groupes (deux chiffres) et les sous-groupes (trois chiffres). Le numéro de référence pour un procédé donné au maximum trois chiffres.
Ce système est prévu pour faciliter l'informatisation et la rédaction, par exemple de dessins, de documents de travail, de descriptifs de modes opératoires de soudage, et permet une désignation internationale uniforme des procédés.
Le présent document ne couvre pas toutes les variantes de procédés. Les numéros de procédés peuvent être complétés par des informations supplémentaires pour les variantes non énumérées.
Varjenje, trdo in mehko spajkanje ter rezanje - Seznam postopkov in številčne oznake (ISO 4063:2023)
V tem dokumentu je določen seznam za:
– varjenje;
– mehko spajkanje, trdo spajkanje in spajkanje zvarov;
– toplotno rezanje;
pri čemer je vsak postopek identificiran z referenčno številko.
Zajema glavne postopke (enomestna številka), skupine (dvomestna številka) in podskupine (trimestna številka). Referenčna številka za posamezni proces je lahko največ trimestna. Ta sistem je namenjen za pomoč pri računalniški obdelavi in pripravi dokumentov (npr. skic, delovne dokumentacije in specifikacij za varilne postopke) ter omogoča enotno mednarodno označevanje postopkov.
Ta dokument ne zajema vseh različic postopkov. Za različice, ki niso navedene, je mogoče številke postopkov dopolniti z dodatnimi informacijami.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2023
Nadomešča:
SIST EN ISO 4063:2011
Varjenje, trdo in mehko spajkanje ter rezanje - Seznam postopkov in številčne
oznake (ISO 4063:2023)
Welding, brazing, soldering and cutting - Nomenclature of processes and reference
numbers (ISO 4063:2023)
Schweißen, Hartlöten, Weichlöten und Schneiden - Liste der Prozesse und
Ordnungsnummern (ISO 4063:2023)
Soudage, brasage et coupage - Nomenclature et numérotation des procédés (ISO
4063:2023)
Ta slovenski standard je istoveten z: EN ISO 4063:2023
ICS:
01.040.25 Izdelavna tehnika (Slovarji) Manufacturing engineering
(Vocabularies)
25.160.01 Varjenje, trdo in mehko Welding, brazing and
spajkanje na splošno soldering in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 4063
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2023
EUROPÄISCHE NORM
ICS 01.040.25; 25.160.01 Supersedes EN ISO 4063:2010
English Version
Welding, brazing, soldering and cutting - Nomenclature of
processes and reference numbers (ISO 4063:2023)
Soudage, brasage et coupage - Nomenclature et Schweißen, Hartlöten, Weichlöten und Schneiden -
numérotation des procédés (ISO 4063:2023) Liste der Prozesse und Ordnungsnummern (ISO
4063:2023)
This European Standard was approved by CEN on 14 March 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4063:2023 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 4063:2023) has been prepared by Technical Committee ISO/TC 44 "Welding
and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2023, and conflicting national standards shall
be withdrawn at the latest by October 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4063:2010.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 4063:2023 has been approved by CEN as EN ISO 4063:2023 without any modification.
INTERNATIONAL ISO
STANDARD 4063
Fifth edition
2023-03
Welding, brazing, soldering and
cutting — Nomenclature of processes
and reference numbers
Soudage, brasage et coupage — Nomenclature et numérotation des
procédés
Reference number
ISO 4063:2023(E)
ISO 4063:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 4063:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Designation . 1
4.1 General . 1
4.2 Hybrid joining processes . 2
5 List of processes and reference numbers . 2
5.1 General . 2
5.2 Welding . . 2
5.3 Thermal cutting . 7
5.4 Brazing and soldering . 8
Annex A (informative) Process variants .11
Annex B (informative) Replaced and obsolete processes .13
Annex C (informative) Acronyms for welding and allied processes used in the United States
of America .14
Bibliography .18
iii
ISO 4063:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 44, Welding and allied processes,
Subcommittee SC 7, Representation and terms, in collaboration with the European Committee for
Standardization (CEN) Technical Committee CEN/TC 121, Welding and allied processes, in accordance
with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This fifth edition cancels and replaces the fourth edition (ISO 4063:2009), which has been technically
revised.
The main changes are as follows:
— incorporation of processes and reference numbers for welding and thermal joining of plastics.
Any feedback or questions on this document should be directed to the user’s national standards
body. A complete listing of these bodies can be found at www.iso.org/members.html. Official
interpretations of ISO/TC 44 documents, where they exist, are available from this page:
https://committee.iso.org/sites/tc44/home/interpretation.html.
iv
INTERNATIONAL STANDARD ISO 4063:2023(E)
Welding, brazing, soldering and cutting — Nomenclature of
processes and reference numbers
1 Scope
This document establishes a nomenclature for:
— welding;
— brazing, soldering and weld brazing;
— thermal cutting;
with each process identified by a reference number.
It covers the main processes (one digit), groups (two digits) and sub-groups (three digits). The
reference number for any process has a maximum of three digits. This system is intended as an aid in
computerization and the drafting of, for example, drawings, working papers and welding procedure
specifications, and enables the uniform international designation of the processes.
This document does not cover all process variants. The process numbers can be supplemented with
additional information for variants not listed.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
4 Designation
4.1 General
Where a full designation is required for a joining process, it shall have the following structure: the
number of this document (i.e. “ISO 4063”), separated by a dash from the reference number of the
process, as shown in these examples.
EXAMPLE 1 Process “Cold pressure welding” with reference number 48 is designated as:
ISO 4063 – 48
EXAMPLE 2 Process “Radio frequency welding” with reference number 62 is designated as:
ISO 4063 – 62
EXAMPLE 3 Process “Heated wedge welding with hot gas” with reference number 662-A is designated as:
ISO 4063:2023(E)
ISO 4063 – 662-A
4.2 Hybrid joining processes
When multiple processes are used simultaneously in one process area, the processes shall be described
using the designations for each process separated by the symbol “+”.
EXAMPLE Process “Gas laser welding” (reference nu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.