EN 12972:2015

Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks

This European Standard specifies testing, inspection and marking for the type approval, initial inspection, periodic inspection, intermediate inspection and exceptional check of metallic tanks (shell and equipment) of fixed tanks (tank vehicles), demountable tanks, rail tank wagons, portable tanks and tank containers for the transport of dangerous goods.
This European Standard is not applicable to battery-vehicles and battery-wagons comprising cylinders, tubes, pressure drums, bundles of cylinders and multiple element gas containers (MEGCs), independent of whether the elements are receptacles or tanks.
It is essential that the requirements of the applicable regulations for the transport of dangerous goods prevail in all cases over those of this standard.

Tanks für die Beförderung gefährlicher Güter - Prüfung, Inspektion und Kennzeichnung von Metalltanks

Diese Europäische Norm legt die Prüfung, Inspektion und Kennzeichnung für die Baumusterprüfung, erst-malige Prüfung, wiederkehrende Prüfung, Zwischenprüfung und außerordentliche Prüfung von Metalltanks (Tankkörper und Ausrüstung) von fest verbundenen Tanks (Tankfahrzeugen), Aufsetztanks, Eisenbahn-kesselwagen, ortsbeweglichen Tanks und Tankcontainern für die Beförderung gefährlicher Güter fest.
Diese Europäische Norm gilt nicht für Batterie-Fahrzeuge und Batterie-Wagen, bestehend aus Flaschen, Großflaschen, Druckfässern, Flaschenbündeln, und Gascontainern mit mehreren Elementen (MEGCs), unab¬hängig davon, ob die Elemente Gefäße oder Tanks sind.
Es ist von grundlegender Bedeutung, dass die Anforderungen der geltenden Vorschriften für die Beförderung gefährlicher Güter immer Vorrang vor den Anforderungen der vorliegenden Norm haben.

Citernes destinées au transport des matières dangereuses - Épreuve, contrôle et marquage des citernes métalliques

La présente Norme européenne spécifie les épreuves, les contrôles et le marquage pour l’agrément de type, le contrôle initial, le contrôle périodique, le contrôle intermédiaire et le contrôle exceptionnel des citernes métalliques (réservoirs et équipements) des citernes fixes (véhicules-citernes), des citernes démontables, des wagons-citernes, des citernes mobiles et des conteneurs-citernes destinés au transport de matières dangereuses.
La présente Norme européenne n’est pas applicable aux véhicules-batteries et wagons-batteries composés de bouteilles, tubes, fûts à pression, cadres de bouteilles et aux conteneurs à gaz à éléments multiples (CGEM), qu’il s’agisse de récipients ou de citernes.
Il est essentiel que les prescriptions des réglementations applicables relatives au transport des marchandises dangereuses prévalent dans tous les cas sur celles de la présente norme.

Cisterne za prevoz nevarnega blaga - Preskušanje, pregled in označevanje kovinskih cistern

Ta evropski standard določa preskušanje, pregled in označevanje za homologacijo, prvi pregled, redne, vmesne in izredne preglede kovinskih (lupine in opreme), pritrjenih cistern (vozila s cisternami), snemljivih cistern, cistern železniških vagonov, premičnih cistern in cistern za prevoz nevarnega blaga. Ta evropski standard se ne uporablja za posode, kot so plinske jeklenke, akumulatorska vozila in akumulatorski vagoni, ki vsebujejo valje, cevi, tlačne valje, sklope jeklenk in plinske vsebnike iz več elementov (MEGC), ne glede na to, ali so elementi posode oz. rezervoarji in skladiščni rezervoarji srednje velikosti (IBC).

General Information

• Status: Withdrawn
• Publication Date: 17-Feb-2015
• Withdrawal Date: 03-Jul-2018
• ICS: 13.300 - Protection against dangerous goods
• ICS: 23.020.20 - Vessels and containers mounted on vehicles
• Technical Committee: CEN/TC 296 - Tanks for transport of dangerous goods
• Drafting Committee: CEN/TC 296/WG 5 - Testing, inspection and marking
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 04-Jul-2018
• Directive: 2008/68/EC - Directve 2008/68/EC of the European Parliament and of the council of 24 September 2008 on the inland transport of the dangerous goods
• Mandate: M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
• Ref Project: SIST EN 12972:2015 - Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks

Relations

• Replaces: EN 12972:2007 - Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks
• Effective Date: 08-Jun-2022
• Replaced By: EN 12972:2018 - Tanks for the transport of dangerous goods - Testing, inspection and marking of metallic tanks
• Effective Date: 15-Jul-2018

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.þHYDQMHTanks für die Beförderung gefährlicher Güter - Prüfung, Inspektion und
Kennzeichnung von MetalltanksCiternes destinées au transport de matières dangereuses - Epreuve, contrôle et marquage des citernes métalliquesTanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehicles13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 12972:2015SIST EN 12972:2015en,fr,de01-maj-2015SIST EN 12972:2015SLOVENSKI
STANDARDSIST EN 12972:20081DGRPHãþD



SIST EN 12972:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12972
February 2015 ICS 13.300; 23.020.20 Supersedes EN 12972:2007English Version
Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks
Citernes destinées au transport des matières dangereuses -Épreuve, contrôle et marquage des citernes métalliques
Tanks für die Beförderung gefährlicher Güter - Prüfung, Inspektion und Kennzeichnung von Metalltanks This European Standard was approved by CEN on 5 December 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12972:2015 ESIST EN 12972:2015



EN 12972:2015 (E) 2 Contents Page Foreword .3 Introduction .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .6 4 Inspections and tests .7 4.1 General .7 4.2 Inspection for type approval .7 4.3 Initial inspection.9 4.4 Periodic inspection .9 4.5 Intermediate inspection . 10 4.6 Exceptional checks . 10 5 Procedures and documentation for inspections and tests . 12 5.1 General . 12 5.2 Examination of documents . 12 5.3 Check of the design
...