iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 10265:1995

(Main)

Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability

Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability

This European standard defines the grades of steel and strip with specified mechanical properties and magnetic permeability. In particular it gives the technological, mechanical and magnetic properties, the dimensional tolerances as well as the conditions of acceptance. This European Standard applies to material used for the poles and rims of rotating electrical machines. These materials correspond to clause D2 of IEC 404-1.

Magnetische Werkstoffe - Anforderungen an Blech und Band aus Stahl mit festgelegten mechanischen und magnetischen Eigenschaften

Die vorliegende Norm enthält die Anforderungen für Band und Blech aus Stahl mit festgelegten mechanischen und magnetischen Eigenschaften. Im einzelnen sind die technologischen, mechanischen und magnetischen Eigenschaften, die Grenzabmaße sowie die Annahmekriterien festgelegt. Die vorliegende Norm gilt für Erzeugnisse, die für die Pole und Einfassungen von rotierenden elektrischen Maschinen bestimmt sind. Diese Erzeugnisse entsprechen dem Abschnitt D2 von IEC 404-1.

Matériaux magnétiques - Spécification des tôles en acier à caractéristiques mécaniques et perméabilité magnétique garanties

La présente norme européenne a pour objet de définir les qualités des tôles en acier à caractéristiques mécaniques et perméabilité magnétique garanties. Elle donne également les caractéristiques technologiques, mécaniques et magnétiques, les tolérances dimensionnelles ainsi que les conditions de réception. La présente norme s'applique aux produits utilisés pour les pôles et jantes des machines électriques. Ces produits correspondent à l'article D2 de la CEI 404-1.

Magnetni materiali - Specifikacija jeklenih pločevin in trakov s specifičnimi mehanskimi lastnostmi in magnetno permeabilnostjo

General Information

Status
Withdrawn
Publication Date
12-Dec-1995
Withdrawal Date
26-Nov-2024
ICS
29.030 - Magnetic materials
Technical Committee
ECISS/TC 108 - Steel sheet and strip for electrical applications
Drafting Committee
ECISS/TC 24 - Electrical steel and strip qualities - Qualities, dimensions, tolerances and specific tests
Current Stage
9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
Start Date
04-Sep-2023
Completion Date
04-Sep-2023
Ref Project
SIST EN 10265:1997 - Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability

Relations

Replaced By
EN 10265:2024 - Magnetics materials - Specification for electrical steel strip and sheet with specified mechanical properties and magnetic polarisation
Effective Date
26-Jul-2023

Buy Standard

EN 10265:1997EN 10265:1997
PreviousNext
Standard
EN 10265:1997
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VSHFLILþQLPLMagnetische Werkstoffe - Anforderungen an Blech und Band aus Stahl mit festgelegten mechanischen und magnetischen EigenschaftenMatériaux magnétiques - Spécification des tôles en acier a caractéristiques mécaniques et perméabilité magnétique garantiesMagnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability77.140.50SROL]GHONLFlat steel products and semi-products29.030Magnetni mat
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 10251:2024(Main)
Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip
SIST EN 10251:2024

This European Standard is intended to define the test methods used for the determination of the following geometrical characteristics of electrical steel sheet and strip:
—   edge wave (wave factor);
—   residual curvature;
—   edge camber;
—   deviation from the shearing line due to internal stresses;
—   burr height of cut edges.
This European Standard applies to electrical steel sheet and strip intended for the construction of magnetic circuits and corresponding to Clauses B2, C21 and C22 of IEC 60404-1:2000.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10342:2005(Main)
Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations
SIST EN 10342:2005

This document establishes a classification of surface insulations for electrical steel sheet, strip and laminations according to their general composition, relative insulating ability and function.
These surface insulations are either oxide layers or applied coatings.
The purpose of this classification is to create a nomenclature for the various types of surface insulations and to assist users of surface insulations by providing general information about the chemical nature and use of the surface insulations.
It is not the intent of this classification to specify insulation requirements in terms of specific values of surface insulation resistance. Such requirements are to be agreed between the purchaser and the steel producer, where applicable.
The classification is to be used in conjunction with the various specifications for cold rolled electrical steels (see the European Standards listed in Clause 2).

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10331:2003(Main)
Magnetic materials - Specification for sintered soft magnetic materials
SIST EN 10331:2003

This European Standard specifies some magnetic and mechanical properties of sintered soft magnetic metals which are used for components made by a powder metallurgical process only.
This standard does not apply to magnetically soft castings or to semi-finished products.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 10342(Main)
Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations
oSIST prEN 10342:2024

This document establishes a classification of surface insulations for electrical steel sheet, strip and laminations according to their general composition, relative insulating ability and function.
These surface insulations are either oxide layers or applied coatings.
The purpose of this classification is to create a nomenclature for the various types of surface insulations and to assist users of surface insulations by providing general information about the chemical nature and use of the surface insulations.
It is not the intent of this classification to specify insulation requirements in terms of specific values of surface insulation resistance. Such requirements are to be agreed between the purchaser and the steel producer, where applicable.
The classification is to be used in conjunction with the various specifications for cold rolled electrical steels (see Clause 2).

  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10251:2024(Main)
Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip
SIST EN 10251:2024

This European Standard is intended to define the test methods used for the determination of the following geometrical characteristics of electrical steel sheet and strip:
—   edge wave (wave factor);
—   residual curvature;
—   edge camber;
—   deviation from the shearing line due to internal stresses;
—   burr height of cut edges.
This European Standard applies to electrical steel sheet and strip intended for the construction of magnetic circuits and corresponding to Clauses B2, C21 and C22 of IEC 60404-1:2000.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10342:2005(Main)
Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations
SIST EN 10342:2005

This document establishes a classification of surface insulations for electrical steel sheet, strip and laminations according to their general composition, relative insulating ability and function.
These surface insulations are either oxide layers or applied coatings.
The purpose of this classification is to create a nomenclature for the various types of surface insulations and to assist users of surface insulations by providing general information about the chemical nature and use of the surface insulations.
It is not the intent of this classification to specify insulation requirements in terms of specific values of surface insulation resistance. Such requirements are to be agreed between the purchaser and the steel producer, where applicable.
The classification is to be used in conjunction with the various specifications for cold rolled electrical steels (see the European Standards listed in Clause 2).

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10331:2003(Main)
Magnetic materials - Specification for sintered soft magnetic materials
SIST EN 10331:2003

This European Standard specifies some magnetic and mechanical properties of sintered soft magnetic metals which are used for components made by a powder metallurgical process only.
This standard does not apply to magnetically soft castings or to semi-finished products.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 10342(Main)
Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations
oSIST prEN 10342:2024

This document establishes a classification of surface insulations for electrical steel sheet, strip and laminations according to their general composition, relative insulating ability and function.
These surface insulations are either oxide layers or applied coatings.
The purpose of this classification is to create a nomenclature for the various types of surface insulations and to assist users of surface insulations by providing general information about the chemical nature and use of the surface insulations.
It is not the intent of this classification to specify insulation requirements in terms of specific values of surface insulation resistance. Such requirements are to be agreed between the purchaser and the steel producer, where applicable.
The classification is to be used in conjunction with the various specifications for cold rolled electrical steels (see Clause 2).

  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13947:2024(Main)
Metallic powders - Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen (ISO 13947:2024)
kSIST FprEN ISO 13947:2024

This document specifies a metallographic test method for determining the non-metallic inclusion level in metal powders using a powder-forged specimen. This test method is applicable to repress powder-forged test specimens in which there has been minimal lateral flow (<1 %). The core region of the powder-forged test specimen must not contain porosity detectable at 100x magnification.
This test method can also be applied to determine the non-metallic inclusion content of powder-forged steel parts. However, in parts where there has been a significant amount of material flow, the near-neighbour separation distance needs to be changed, or the inclusion sizes agreed between the parties need to be adjusted.
This test method is not applicable for determining the non-metallic inclusion level of parts that have been forged such that the core region contains porosity. At the magnification used for this test method, residual porosity is hard to distinguish from inclusions. Too much residual porosity makes a meaningful assessment of the inclusion population impossible.
This test method can also be applied to materials that contain manganese sulphide (admixed or prealloyed), provided the near-neighbour separation distance is changed from 30 µm to 15 µm.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 18034:2024(Main)
Algae and algae products - Methods of sampling and analysis - Determination of chlorophyll a content
kSIST FprEN 18034:2024

This document specifies a laboratory method for the determination of chlorophyll a content in algae. The method was initially tested and evaluated on the microalgae species Nannochloropsis sp. and a heat treated algal product tomato soup with Nannochloropsis sp. supplement, and the macro algae species Ulva sp., Furcellaria lumbricalis, and Saccharina latissima. During an Interlaboratory Trial the method was tested on the microalgae species Nannochloropsis sp. and the macro algae species Saccharina latissima. The microalgae species Nannochloropsis sp. and Phaodactlylum sp. and the macro algae species Ulva sp. and Saccharina latissima were tested in a Round Robin test. This document is only validated for chlorophyll a, but it can be used for other chlorophylls as well.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day