EN ISO 11146-1:2021

Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams (ISO 11146-1:2021)

This document specifies methods for measuring beam widths (diameter), divergence angles and beam propagation ratios of laser beams. This document is only applicable for stigmatic and simple astigmatic beams. If the type of the beam is unknown, and for general astigmatic beams, ISO 11146‑2 is applicable.

Laser und Laseranlagen - Prüfverfahren für Laserstrahlabmessungen, Divergenzwinkel und Beugungsmaßzahlen - Teil 1: Stigmatische und einfach astigmatische Strahlen (ISO 11146-1:2021)

Dieses Dokument legt Verfahren zur Messung von Strahlabmessungen (Strahldurchmesser), Divergenz-winkeln und Beugungsmaßzahlen von Laserstrahlen fest. Dieses Dokument ist nur für stigmatische und einfach astigmatische Strahlen anzuwenden. Wenn die Art des Strahles unbekannt ist und bei allgemein astigmatischen Strahlen, ist ISO 11146 2 anzuwenden.

Lasers et équipements associés aux lasers - Méthodes d'essai des largeurs du faisceau, angles de divergence et facteurs de limite de diffraction - Partie 1: Faisceaux stigmatiques et astigmatiques simples (ISO 11146-1:2021)

Le présent document spécifie les méthodes pour mesurer les largeurs (diamètres) du faisceau, les angles de divergence et les facteurs de limite de diffraction. Le présent document s'applique uniquement aux faisceaux stigmatiques et astigmatiques simples. Si le type de faisceau est inconnu et pour les faisceaux astigmatiques généraux, l'ISO 11146‑2 s'applique.

Laserji in laserska oprema - Preskusne metode za širine laserskega žarka, kota divergence in faktorja širjenja žarkov - 1. del: Stigmatični in enostavni astigmatični žarki (ISO 11146-1:2021)

General Information

• Status: Published
• Publication Date: 20-Jul-2021
• Withdrawal Date: 30-Jan-2022
• ICS: 31.260 - Optoelectronics. Laser equipment
• Technical Committee: CEN/TC 123 - Lasers and photonics
• Drafting Committee: CEN/TC 123 - Lasers and photonics
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 21-Jul-2021
• Completion Date: 21-Jul-2021
• Ref Project: SIST EN ISO 11146-1:2021 - Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams (ISO 11146-1:2021)

Relations

• Replaces: EN ISO 11146-1:2005 - Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams (ISO 11146-1:2005)
• Effective Date: 30-Jan-2019

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2021
Nadomešča:
SIST EN ISO 11146-1:2005
Laserji in laserska oprema - Preskusne metode za širine laserskega žarka, kota
divergence in faktorja širjenja žarkov - 1. del: Stigmatični in enostavni astigmatični
žarki (ISO 11146-1:2021)
Lasers and laser-related equipment - Test methods for laser beam widths, divergence
angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams
(ISO 11146-1:2021)
Laser und Laseranlagen - Prüfverfahren für Laserstrahlabmessungen, Divergenzwinkel
und Beugungsmaßzahlen - Teil 1: Stigmatische und einfach astigmatische Strahlen (ISO
11146-1:2021)
Lasers et équipements associés aux lasers - Méthodes d'essai des largeurs du faisceau,
angles de divergence et facteurs de limite de diffraction - Partie 1: Faisceaux
stigmatiques et astigmatiques simples (ISO 11146-1:2021)
Ta slovenski standard je istoveten z: EN ISO 11146-1:2021
ICS:
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 11146-1
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2021
EUROPÄISCHE NORM
ICS 31.260 Supersedes EN ISO 11146-1:2005
English Version
Lasers and laser-related equipment - Test methods for
laser beam widths, divergence angles and beam
propagation ratios - Part 1: Stigmatic and simple
astigmatic beams (ISO 11146-1:2021)
Lasers et équipements associés aux lasers - Méthodes Laser und Laseranlagen - Prüfverfahren für
d'essai des largeurs du faisceau, angles de divergence Laserstrahlabmessungen, Divergenzwinkel und
et facteurs de limite de diffraction - Partie 1: Faisceaux Beugungsmaßzahlen - Teil 1: Stigmatische und einfach
stigmatiques et astigmatiques simples (ISO 11146- astigmatische Strahlen (ISO 11146-1:2021)
1:2021)
This European Standard was approved by CEN on 4 July 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11146-1:2021 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 11146-1:2021) has been prepared by Technical Committee ISO/TC 172 "Optics
and photonics" in collaboration with Technical Committee CEN/TC 123 “Lasers and photonics” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2022, and conflicting national standards shall
be withdrawn at the latest by January 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11146-1:2005.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN websites.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 11146-1:2021 has been approved by CEN as EN ISO 11146-1:2021 without any
modification.
INTERNATIONAL ISO
STANDARD 11146-1
Second edition
2021-07
Lasers and laser-related equipment —
Test methods for laser beam
widths, divergence angles and beam
propagation ratios —
Part 1:
Stigmatic and simple astigmatic
beams
Lasers et équipements associés aux lasers — Méthodes d'essai des
largeurs du faisceau, angles de divergence et facteurs de limite de
diffraction —
Partie 1: Faisceaux stigmatiques et astigmatiques simples
Reference number
ISO 11146-1:2021(E)
©
ISO 2021
ISO 11146-1:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

ISO 11146-1:2021(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Coordinate systems . 7
5 Test principles . 7
5.1 Applicability . 7
5.2 Beam widths and beam diameter . 7
5.3 Beam divergence angles . 8
5.4 Beam propagation ratios . 8
5.5 Combined measurement of beam waist locations, beam widths, beam divergence
angles and beam propagation ratios . 8
6 Measurement arrangement and test equipment . 8
6.1 General . 8
6.2 Preparation . 8
6.3 Control of environment . 9
6.4 Detector system . 9
6.5 Beam-forming optics and optical attenuators . 9
6.6 Focusing system .10
7 Beam widths and beam diameter measurement .10
7.1 Test procedure .10
7.2 Evaluation .10
8 Measurement of divergence angles .12
8.1 Test procedure .12
8.2 Evaluation .12
9 Combined determination of beam waist locations, beam widths, divergence angles
and beam propagation ratios .12
10 Test report .14
Bibliography .17
ISO 11146-1:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This docume
...