EN ISO 10722:2007

Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (ISO 10722:2007)

ISO 10722:2007 describes an index test procedure for simulating mechanical damage to geosynthetics, caused by granular material, under repeated loading. The damage is assessed visually and by the loss of tensile strength.

Geokunststoffe - Indexprüfverfahren zur Bewertung von mechanischen Schäden bei wiederholter Belastung - Beschädigung durch körnige Materialien (ISO 10722:2007)

Diese Internationale Norm beschreibt ein Indexprüfverfahren zur Simulierung von mechanischen Beschädigungen von Geokunststoffen, hervorgerufen durch körnige Materialien unter wiederholter Belastung. Die Beschädigung wird durch Sichtprüfung und den Verlust der Zugfestigkeit bewertet.
Zur Beurteilung der bei dieser Prüfung hervorgerufenen Beschädigungen können weitere Vergleichs¬prüfungen herangezogen werden. Das beschriebene Prüfverfahren ist eine Indexprüfung unter Verwendung von körnigem Standardmaterial.

Géosynthétiques - Mode opératoire d'essai pour évaluer l'endommagement mécanique sous charge répétée - Endommagement causé par des matériaux granulaires (ISO 10722:2007)

L'ISO 10722:2007 décrit un mode opératoire d'essai permettant de simuler l'endommagement mécanique des géosynthétiques causé par les matériaux granulaires sous charge cyclique. L'endommagement est évalué visuellement et par détermination de la perte de résistance à la traction.

Geosintetika - Postopek indeksne ocene mehanskih poškodb pri ponavljajoči obremenitvi - Poškodba povzročena z zrnasto snovjo (ISO 10722:2007)

General Information

• Status: Withdrawn
• Publication Date: 14-May-2007
• Withdrawal Date: 03-Dec-2019
• ICS: 59.080.70 - Geotextiles
• Technical Committee: CEN/TC 189 - Geotextiles and geotextile-related products
• Drafting Committee: CEN/TC 189 - Geotextiles and geotextile-related products
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 04-Dec-2019
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN ISO 10722:2007 - Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (ISO 10722:2007)

Relations

• Replaces: ENV ISO 10722-1:1998 - Geotextiles and geotextile-related products - Procedure for simulating damage during installation - Part 1: Installation in granular materials (ISO 10722-1:1998)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 10722:2019 - Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (laboratory test method) (ISO 10722:2019)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10722:2007
01-julij-2007
*HRVLQWHWLND3RVWRSHNLQGHNVQHRFHQHPHKDQVNLKSRãNRGESULSRQDYOMDMRþL
REUHPHQLWYL3RãNRGEDSRY]URþHQD]]UQDVWRVQRYMR,62
Geosynthetics - Index test procedure for the evaluation of mechanical damage under
repeated loading - Damage caused by granular material (ISO 10722:2007)
Geokunststoffe - Indexprüfverfahren zur Bewertung von mechanischen Schäden bei
wiederholter Belastung - Beschädigung durch körnige Materialien (ISO 10722:2007)
Géosynthétiques - Mode opératoire d'essai pour évaluer l'endommagement mécanique
sous charge répétée - Endommagement causé par des matériaux granulaires (ISO
10722:2007)
Ta slovenski standard je istoveten z: EN ISO 10722:2007
ICS:
59.080.70 Geotekstilije Geotextiles
SIST EN ISO 10722:2007 en;fr;de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 10722
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2007
ICS 59.080.70 Supersedes ENV ISO 10722-1:1998
English Version
Geosynthetics - Index test procedure for the evaluation of
mechanical damage under repeated loading - Damage caused
by granular material (ISO 10722:2007)
Géosynthétiques - Mode opératoire d'essai pour évaluer Geokunststoffe - Indexprüfverfahren zur Bewertung von
l'endommagement mécanique sous charge répétée - mechanischen Schäden bei wiederholter Belastung -
Endommagement causé par des matériaux granulaires Beschädigung durch körnige Materialien (ISO 10722:2007)
(ISO 10722:2007)
This European Standard was approved by CEN on 14 May 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10722:2007: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 10722:2007 (E)







Foreword


This document (EN ISO 10722:2007) has been prepared by Technical Committee CEN/TC 189
"Geosynthetics", the secretariat of which is held by NBN, in collaboration with Technical
Committee ISO/TC 221 "Geosynthetics".

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by November 2007, and conflicting national
standards shall be withdrawn at the latest by November 2007.

This document supersedes ENV ISO 10722-1:1998.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
Kingdom.

2

---------------------- Page: 3 ----------------------

INTERNATIONAL ISO
STANDARD 10722
FIrst edition
2007-05-15


Geosynthetics — Index test procedure for
the evaluation of mechanical damage
under repeated loading — Damage
caused by granular material
Géosynthétiques — Mode opératoire d'essai pour évaluer
l'endommagement mécanique sous charge répétée —
Endommagement causé par des matériaux granulaires




Reference number
ISO 10722:2007(E)
©
ISO 2007

---------------------- Page: 4 ----------------------

ISO 10722:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing
...