CR 13908:2000
(Main)Logistics Performance Measures - Requirements and Measuring Methods
- BACK
- 23-May-2000
- 16-Jun-2020
- 03.100.10
- CEN/TC 273
Logistics Performance Measures - Requirements and Measuring Methods
A performance measure or indicator is information about a process that is: - defined and recorded in a prescribed way; - supportive to the management of an enterprise; - related to standards or other information. Processes may be measured by a suitable set of performance measures e.g. variables indicating effectiveness, efficiency or productivity. Alternative definitions exist elsewhere for the term "performance measurement" or "performance indicator".
Merila za ocenjevanje logističnih storitev - Zahteve in ocenjevalni postopki
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Logistics Performance Measures - Requirements and Measuring Methods03.100.10Nabava. Dobava. LogistikaPurchasing. Procurement. Management of stockICS:Ta slovenski standard je istoveten z:CR 13908:2000SIST CR 13908:2001en01-maj-2001SIST CR 13908:2001SLOVENSKI
STANDARD
...
This May Also Interest You
This choreographies document specify ordering between Buyer and Seller where the Buyer wants to reach an agreement with the Seller about an order. It specifies a series of activities that govern communication between the parties and refers to the specifications where information and rules that apply are specified.
The various possible behaviours of the Seller and Buyer subsequent to the first order communication are conveyed by variants of this choreography that are specified in 5.2.
Previous activities (e.g. cataloguing) and subsequent activities (e.g. invoicing) are outside the scope of this document. If performed electronically, their implementation is covered by other choreographies.
The identifier of this choreographies document is EN 17016-1:2024.
How to claim compliance to this choreography is specified in 5.2.3.
- Standard81 pagesEnglish languagesale 10% offe-Library read for×1 day
- 02-Apr-2024
- 03.100.10
- 35.240.20
- 35.240.63
- CEN/TC 440
This document specifies requirements and guidance for buyer organizations, with regards to integrity and accountability in public procurement processes from the identification of needs throughout the delivering of goods, services or work contracts.
This document is applicable to use by:
a) buyer organizations;
b) contributors;
c) decision makers and their staff.
This document can have an impact on:
- individuals;
- suppliers and individuals acting in support of or on behalf of suppliers, including subcontractors; the official bodies of the member states and of the European organizations which intervene, directly or indirectly, in the public procurement process;
- organizations representing suppliers at the member state or European levels.
NOTE Further guidance for the interpretation and application of the scope and requirements of this document is provided in Annex A.
- Standard40 pagesEnglish languagesale 10% offe-Library read for×1 day
This document provides guidance for the assessment of the capacity of service providers and the evaluation of service proposals in order to improve and facilitate the process of procuring services.
This document is applicable to:
a) Service buyers and service providers regardless of type, size or the nature of the services;
b) Service providers who may be inside or outside the service buyers' organization; and
c) Any interested parties who are directly or indirectly involved in or affected by a procurement process.
This document is not applicable to business-to-consumer (B2C) service contracts or for works contracts.
NOTE 1 "Works contracts" are contracts that have as their object the execution, or both the design and execution, of a work are not covered in this document. Contracts having as their object only the design of a work are covered.
NOTE 2 "Work" means the outcome of building or civil engineering works taken as a whole which is sufficient in itself to fulfil an economic or technical function.
- Standard32 pagesEnglish languagesale 10% offe-Library read for×1 day
- 30-Mar-2021
- 29-Sep-2021
- 03.080.20
- 03.100.10
- M/517
- CEN/TC 447
This document provides an overview of standards in the set Business Interoperability Interfaces (BII) for public procurement. It covers the first part of the e- procurement chain. BII focus on exchange of information between business partners. This brings in scope all electronic communication between a contracting authority and an economic operator. Back-office information processing is out of scope.
To ensure interoperability each electronic communication will be described as follows:
- A choreography describes the sequence of transactions;
- A transaction describes all information elements exchanged between business partners;
- A syntax implementation guideline (SIG) provides the syntax bindings needed to implement the transaction
- A procurement procedure guideline identifies the position of the transactions in a procedure.
- Technical report13 pagesEnglish languagesale 10% offe-Library read for×1 day
- 03-Jul-2018
- 03.100.10
- 35.240.20
- 35.240.63
- CEN/TC 440
This document provides an overview of e-ordering standards in the set Business Interoperability Inter-
faces (BII) for public procurement. E-ordering covers the e-sourcing and e-ordering business areas of the
e-procurement chain, starting from the awarding of the contract or the receiving of a quotation to the receipt of a despatch advise or a receiving advice for the goods or services that have been ordered.
- Technical report15 pagesEnglish languagesale 10% offe-Library read for×1 day
- 03-Jul-2018
- 03.100.10
- 35.240.20
- 35.240.63
- CEN/TC 440
This document provides an overview of eTendering standards in the set Business Interoperability Interfaces (BII) for public procurement. BII eTendering covers the tendering part of the e-procurement chain, starting from subscribing interest in a business opportunity till concluding the contract.
BII focus on exchange of information between business partners. This brings in scope all electronic communication between a contracting authority and an economic operator. Back-office information processing, like the evaluation of tenders, is out of scope.
To ensure interoperability each electronic communication will be described as follows:
- A procurement procedure guideline identifies the position of the transactions in a procedure;
- A choreography describes the sequence of transactions;
- A transaction describes all information elements exchanged between business partners;
- A syntax implementation guideline (SIG) provides the syntax bindings needed to implement the transaction.
- Technical report23 pagesEnglish languagesale 10% offe-Library read for×1 day
- 20-Feb-2018
- 03.100.10
- 35.240.20
- 35.240.63
- CEN/TC 440
The CEN/TC 440/WG5 has developed a set of deliverables to support interoperability in the pre- and post-award areas of public procurement. In particular, the deliverables cover the exchange of electronic product catalogues and related documents between contracting bodies and economic operators respectively buyers and sellers. An electronic product catalogue contains specifications of products (goods and services) with their pricing. A catalogue is used to serve as a basis for ordering and all other following post-award processes. To ensure interoperability each electronic communication will be described as follows:
• A choreography describes the sequence of transactions;
• A transaction describes all information elements exchanged between business partners;
• A syntax implementation guideline (SIG) provides the syntax bindings needed to implement the transaction.
- Technical report15 pagesEnglish languagesale 10% offe-Library read for×1 day
- 20-Feb-2018
- 03.100.10
- 35.240.20
- 35.240.63
- CEN/TC 440
This European Standard specifies a model for reporting crime incidents related to transport services.
This European Standard specifies common rules for incident reporting data, data collection and securing process independently whether the reporter/collector is a private company, association or public authority.
- Standard11 pagesEnglish languagesale 10% offe-Library read for×1 day
- 19-Mar-2013
- 29-Sep-2013
- 03.100.10
- 35.240.60
- M/419
- CEN/TC 379
This European Standard is a tool to be used by any partner wishing to draft and make use of the reference of any need to be satisfied. In light of this purpose, it:
a) states the interests and fields of application of the Functional Need Analysis, Functional Need Expression and Functional Performance Specification concepts;
b) determines the contents requirements of the functional need expression structured in four main bodies:
1) global definition of the need;
2) definition of the strategic elements and the consolidation of needs;
3) highlighting of principles, and concepts chosen beforehand, if any;
4) description of the functions to be provided and of the constraints to be complied with.
c) determines the requirements on the composition and contents of a functional performance specification and those used to assess its quality, i.e. requirements concerning:
1) its contents and structure;
2) the assessment of the characteristics which define its quality.
d) precisely specifies, in the form of requirements:
1) the conditions for a successful Functional Need Analysis (FNA) action producing a deliverable called Functional Need Expression (FNE);
2) the conditions for drawing up a successful functional performance specification (FPS) based on the available functional need expression (FNE);
3) the conditions of use of the FPS by the inquirer and the various partners involved (the provider for example);
e) specifies the various conditions of use of these concepts.
This European Standard is applicable in principle to all product types and dimensions (from the elementary tangible object to the definition of an organisation and its strategy, including the systems or processes and activities implemented by an organisation) and to all sectors of activity (including the service sector). Lastly it is applicable within the framework of relationships between external partners (between a customer and its providers) or internally (between two entities of the same organisation for example).
- Standard36 pagesEnglish languagesale 10% offe-Library read for×1 day
- 18-Dec-2012
- 29-Jun-2013
- 03.100.10
- CEN/TC 279
This Technical Report aims to provide Small and Medium sized Enterprises (SMEs) basic knowledge about how to manage and mitigate the risk of criminal and terrorist activities. This is a shared objective for the private and public sector*. For the private sector, companies have gained experience on measures, which can assist in preventing security breaches from happening, to protect against supply chain interruption. Also some business standards have been developed identifying measures, which companies can execute in order to obtain labels which certify business operations and reward them with a security quality label. The public sector has developed security legislation which companies should either mandatory or voluntary apply into their business operations.
This Guide provides an easy-to-read overview on:
1) How SMEs can apply a supply chain security approach to their operations (Clause 2).
2) The main crime types in the supply chain including some measures to fight these crime types from occurring (Clause 3).
3) Supply chain security legislation and programs, with their respective compliance requirements (Clause 4).
*In the context of this guide, "supply chain security" covers risk management, crime prevention, security procedures and technologies, as well as security regulations and programs. The overview and examples in this book are based on recent academic work and interviews with experts in the field, including CEN SCS Feasibility Study (2010); EU FP7-LOGSEC Roadmap (2011) and interviews with CEN TC/379 experts.
- Technical report22 pagesEnglish languagesale 10% offe-Library read for×1 day
- 04-Sep-2012
- 03.100.10
- M/419
- CEN/TC 379
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.