iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12007-3:2000

(Main)

Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional recommendations for steel

Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional recommendations for steel

This European Standard describes the specific functional recommendations for steel pipelines in addition to the general functional recommendations of prEN 12007-1 for maximum operating pressures up to and including 16 bar. The European Standard specifies common basic principles for gas supply systems. Users of this European Standard should be aware that more detailed national standards and/or codes of practice can exist in the CEN member countries.

Gasversorgungssysteme - Rohrleitungen mit einem maximal zulässigen Betriebsdruck bis einschließlich 16 bar - Teil 3: Besondere funktionale Empfehlungen für Stahl

Diese Norm beschreibt die besonderen funktionalen Empfehlungen fu(r Stahl- rohrleitungen in Erga(nzung zu den allgemeinen funktionalen Empfehlungen von prEN 12007-1 fu(r maximal zula(ssige Betriebsdru(cke bis einschließlich 16 bar. Diese Europa(ische Norm entha(lt allgemeine Grundsa(tze der Gasversorgung. Anwender dieser Europa(ischer Norm sollten sich dessen bewußt sein, daß detaillierte nationale Norm bzw. Arbeitsbla(tter in den CEN-Mitgliedsla(ndern existieren ko(nnen.

Systèmes d'alimentation en gaz - Canalisations pour pression maximale de service inférieure ou égale à 16 bar - Partie 3: Recommandations fonctionnelles spécifiques pour l'acier

La présente norme européenne décrit, en complément des recommandations fonctionnelles générales du prEN 12007-1, les recommandations fonctionnelles spécifiques applicables aux canalisations en acier pour les pressions maximales de service jusqu'` et y compris 16 bar. La présente norme européenne spécifie les principes de base communs pour les systèmes d'alimentation en gaz. Il convient que les utilisateurs de la présente norme gardent ` l'esprit l' existence éventuelle, dans les pays membres du CEN, de codes de pratique et/ou de normes nationales plus détaillés.

Sistemi oskrbe s plinom - Cevovodni sistemi za najvišji delovni tlak do vključno 16 bar - 3. del: Posebna funkcionalna priporočila za jekla

General Information

Status
Withdrawn
Publication Date
18-Jan-2000
Withdrawal Date
05-May-2015
ICS
23.040.10 - Iron and steel pipes
Technical Committee
CEN/TC 234 - Gas infrastructure
Drafting Committee
CEN/TC 234/WG 2 - Gas supply systems up to and including 16 bar and pressure testing
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
06-May-2015
Directive
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
Mandate
M/017 - Standardization mandate to CEN in the field of equipment and installation for the transmission and distribution of gas
Ref Project
SIST EN 12007-3:2000 - Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional recommendations for steel

Relations

Replaced By
EN 12007-3:2015 - Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel
Effective Date
11-May-2015

Buy Standard

EN 12007-3:2000EN 12007-3:2000
PreviousNext
Standard
EN 12007-3:2000
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gasversorgungssysteme - Rohrleitungen mit einem maximal zulässigen Betriebsdruck bis einschließlich 16 bar - Teil 3: Besondere funktionale Empfehlungen für StahlSystemes d'alimentation en gaz - Canalisations pour pression maximale de service inférieure ou égale a 16 bar - Partie 3: Recommandations fonctionnelles spécifiques pour l'acierGas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional recommendations for steel91.140.40Sistemi za oskrbo s plinom
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12007-3:2015(Main)
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel
SIST EN 12007-3:2015

This European Standard describes the specific functional requirements for steel pipelines in addition to the general functional requirements of EN 12007-1 for maximum operating pressures up to and including 16 bar. This European Standard specifies common basic principles for gas infrastructure. Users of this European Standard should be aware that more detailed national standards and/or codes of practice may exist in the CEN member countries.
This European Standard is intended to be applied in association with these national standards and/or codes of practice setting out the above-mentioned basic principles.
In the event of conflicts in terms of more restrictive requirements in national legislation/regulation with the requirements of this standard, national legislation/regulation takes precedence as illustrated in CEN/TR 13737 (all parts).
CEN/TR 13737 (all parts) gives:
-   clarification of all legislation/regulations applicable in a member state;
-   if appropriate, more restrictive national requirements;
-   a national contact point for the latest information.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17970:2024(Main)
Ductile iron pipes - Push-in joints for ductile iron pipe systems - Resistance against root penetration - Requirements and test methods
SIST EN 17970:2024

This document is applicable to diffusion-tight pipes, accessories and fittings in ductile cast iron to EN 598 and to cast iron pipe systems.
The document gives requirements on the contact pressure based on a risk assessment and gives a test method that simulates the penetration of a root tip into the sealing gap.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17996:2024(Main)
Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Guidelines for Pipelines Installation
SIST-TP CEN/TR 17996:2024

This European Standard is a complementary document for the installation of ductile iron pipes, fittings, accessories and their joints, covered by EN 598:2009 harmonized standard. It is intended to describe, in a wider perspective, installation technologies, tools and pipelines particular examples, applicable for the construction, outside buildings, of:
-   Drainage pipeline systems;
-   Raw water pipeline systems;
-   Sewage pipeline systems;
-   Pipeline systems conveying surface water (e.g. rainwater), domestic waste water and/or certain types of industrial effluents, either in separate systems or in combined systems;
-   Operating without pressure (gravity sewers) or with positive or negative pressure;
-   Below or above ground installation types.
It also gives some site operation/site instructions for the application of fittings, intended to be used for the connection of ductile iron drains and sewers to other materials as plastic, concrete, vitrified clay, etc.
This European Standard is not intended to cover:
-   Hydraulic design of drains and sewers systems outside buildings. For this purpose, EN 16933-2 applies.
-   Construction and site testing of drains and sewers. For this purpose, EN 1610 applies.
-   Trenchless construction and testing of drains and sewers. For this purpose, EN 12889:2000 applies

  • Technical report
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 253:2019+A1:2023(Main)
District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made pipe assembly of steel service pipe, polyurethane thermal insulation and a casing of polyethylene
SIST EN 253:2019+A1:2024

This document specifies requirements and test methods for straight lengths of factory made thermally insulated bonded single pipe assemblies for hot water networks in accordance with EN 13941-1, comprising a steel service pipe, polyurethane foam thermal insulation and a casing of polyethylene.
The pipe assembly can also include the following additional elements: measuring wires, spacers and diffusion barriers.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10357:2022(Main)
Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
SIST EN 10357:2022

This document specifies dimensions, tolerances, materials, internal and external surface characteristics, and marking of stainless steels longitudinally fusion welded tubes for the food and chemical industry.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13941-1:2019+A1:2021(Main)
District heating pipes - Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks - Part 1: Design
SIST EN 13941-1:2019+A1:2022

This European Standard specifies requirements for design, calculation and installation of factory made thermal insulated bonded single and twin pipe systems for directly buried hot water networks for continuous operation with treated hot water at various temperatures up to 120 ºC and occasionally with peak temperatures up to 140 ºC and maximum internal pressure 2,5 MPa. Flexible pipe systems according to EN 15632 are not under the scope of this standard.
The standard EN 13941, Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks consists of two parts:
a)   prEN 13941-1: Design;
b)   prEN 13941-2: Installation.
The requirements and stipulations in this part: EN 13941-1, form an unbreakable unity with those of prEN 13941-2. This part shall therefore exclusively be used in combination with prEN 13941-2.
The principles of the standard may be applied to thermal insulated pipe systems with pressures higher than 2,5 MPa, provided that special attention is paid to the effects of pressure.
Adjacent pipes, not buried, but belonging to the network (e. g. pipes in ducts, valve chambers, road crossings above ground etc.) may be designed and installed according to this standard.
This standard presupposes the use of treated water, which by softening, demineralisation, de-aeration, adding of chemicals, or otherwise has been treated to effectively prevent internal corrosion and deposits in the pipes.
NOTE   For further information on water qualities to be used in district heating pipe systems see also [1].
This standard is not applicable for such units as:
a)   pumps;
b)   heat exchangers;
c)   boilers, tanks;
d)   systems behind domestic substations.

  • Standard
    161 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13941-2:2019+A1:2021(Main)
District heating pipes - Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks - Part 2: Installation
SIST EN 13941-2:2019+A1:2022

This European Standard specifies requirements for design, calculation and installation of factory made thermal insulated bonded single and twin pipe systems for directly buried networks for continuous operation with treated hot water at various temperatures up to 120 ºC and occasionally with peak temperatures up to 140 ºC and maximum internal pressure 2,5 MPA. Flexible pipe systems according to EN 15632 are not under the scope of this standard.
The standard EN 13941, Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks consists of two parts:
a)   EN 13941-1: Design;
b)   EN 13941-2: Installation.
The requirements and stipulations in this part: prEN 13941-2, form an unbreakable unity with those of prEN 13941-1. This part shall therefore exclusively be used in combination with prEN 13941-1.
The principles of the standard may be applied to thermal insulated pipe systems with pressures higher than 2,5 MPa, provided that special attention is paid to the effects of pressure.
Adjacent pipes, not buried, but belonging to the network (e. g. pipes in ducts, valve chambers, road crossings above ground etc.) may be designed and installed according to this standard.
This standard presupposes the use of treated water, which by softening, demineralisation, de-aeration, adding of chemicals, or otherwise has been treated to effectively prevent internal corrosion and deposits in the pipes.
This standard is not applicable for such units as:
a)   pumps;
b)   heat exchangers;
c)   boilers, tanks;
d)   systems behind domestic substations.

  • Standard
    96 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10217-7:2021(Main)
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
SIST EN 10217-7:2021

This document specifies the technical delivery conditions in two test categories for welded tubes of circular cross-section made of austenitic and austenitic-ferritic stainless steel which are intended for pressure and corrosion resisting purposes at room temperature, at low temperatures or at elevated temperatures.
NOTE   Once the reference of this document is published in the Official Journal of the European Union (OJEU) under Directive 2014/68/EU, pressure equipment directive, presumption of conformity to the Essential Safety Requirements (ESR) of Directive 2014/68/EU is limited to technical data of materials in this document and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of the Pressure Equipment Directive are satisfied, needs to be done by the designer of the pressure equipment, taking also into account the subsequent manufacturing processes which could affect properties of the base materials.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10216-5:2021(Main)
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
SIST EN 10216-5:2021

This document specifies the technical delivery conditions in two test categories for seamless tubes of a circular cross section made of austenitic (including creep resisting steel) and austenitic-ferritic stainless steel which are intended for pressure and corrosion resisting purposes at room temperature, at low temperatures or at elevated temperatures.
NOTE   Once this document is published in the Official Journal of the European Union (OJEU) under Directive 2014/68/EC, presumption of conformity to the Essential Safety Requirements (ESR) of Directive 2014/68/EC is limited to technical data of materials in this document and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of the Pressure Equipment Directive are satisfied will be done by the designer or manufacturer of the pressure equipment, taking also into account the subsequent manufacturing processes which could affect properties of the base materials.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15655-2:2020(Main)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes
SIST EN 15655-2:2021

This document specifies the requirements and test methods applicable to factory applied internal lining made of thermoplastic acid modified polyolefin (TMPO) for the heavy duty corrosion protection of ductile iron pipes conforming to EN 545, EN 598 and EN 969. This document also applies to pipes with only socket and spigot ends coated with TMPO. Fittings and accessories are covered separately by EN 14901-2.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day