EN 10245-1:2011
(Main)Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
This European Standard specifies the requirements for the characteristics and testing methods for organic coatings made of organic coating material suitable for the application on to steel wire and wire products of circular or other sections.
Other organic materials which are applied intentionally or otherwise such as oils, greases, waxes and temporary finishes which do not become integral or a permanent part of the finished wire product are excluded from this standard
This European Standard is divided in a number of parts, with Part 1 covering the requirements of a general nature and applies to organic coatings and coating material for which no specific requirements have been established in the subsequent parts of prEN 10245.
Stahldraht und Drahterzeugnisse - Organische Beschichtungen auf Stahldraht - Teil 1: Allgemeine Regeln
Diese Europäische Norm legt die Anforderungen an die Eigenschaften und die Prüfverfahren von organischen Beschichtungen aus organischen Beschichtungsstoffen auf Stahldraht und Drahterzeugnissen mit rundem oder anderem Querschnitt fest.
Andere absichtlich oder unabsichtlich aufgebrachten organischen Beschichtungsstoffe, wie Öle, Fette, Wachse und temporäre Oberflächenausführungen, die keinen dauerhaften, integralen Teil des beschichteten Drahterzeugnisses bilden, sind nicht Gegenstand dieser Norm.
Diese Europäische Norm besteht aus mehreren Teilen, von denen Teil 1 die Anforderungen allgemeiner Art erfasst und für organische Beschichtungen und Beschichtungsstoffe gilt, für die in den nachfolgenden Teilen von EN 10245 keine besonderen Anforderungen festgelegt sind.
Fils et produits tréfilés en acier - Revêtements organiques sur fils d'acier - Partie 1: Principes généraux
Cette norme européenne spécifie les prescriptions en matière de caractéristiques et les méthodes d'essai applicables aux revêtements en matériaux organiques adaptés à l'application sur des fils et produits tréfilés en acier de section circulaire ou autre.
D'autres matériaux organiques appliqués de façon intentionnelle ou non, telles que huiles, graisses, cires, finitions temporaires, ne relèvent pas de la présente norme car ils ne font pas partie intégrante du produit tréfilé fini ou ils n’en font pas partie de manière définitive.
Cette norme européenne se compose de plusieurs parties ; la partie 1 couvre les prescriptions de caractère général et s'applique aux revêtements organiques et aux matériaux de revêtement pour lesquels aucune prescription spécifique n'a été établie dans les autres parties de l'EN 10245.
Jeklena žica in žični izdelki - Organske prevleke na jekleni žici - 1. del: Splošna pravila
Ta evropski standard določa zahteve za karakteristike in preskusne metode za organske prevleke, narejene iz organskega materiala, primernega za nanos na jekleno žico in žične izdelke krožnih ali drugačnih prerezov. Ta standard ne vključuje drugih organskih materialov, nanesenih namenoma ali kako drugače, kot so olja, maziva, voski in začasne apreture, ki ne postanejo integralni ali stalni del končnega žičnega izdelka.
General Information
- Status
- Published
- Publication Date
- 25-Oct-2011
- Withdrawal Date
- 29-Apr-2012
- Technical Committee
- ECISS/TC 106 - Wire rod and wires
- Drafting Committee
- ECISS/TC 106 - Wire rod and wires
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 03-Dec-2021
- Completion Date
- 14-Apr-2025
Relations
- Effective Date
- 03-Nov-2011
Overview
EN 10245-1:2011 - "Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules" is a CEN European Standard that defines the general requirements and testing methods for organic coatings and coating materials intended for application to steel wire and related wire products (including wire ropes and link chains). Part 1 covers coatings and coating materials for which no part‑specific rules exist in subsequent parts of the series. It excludes temporary finishes (oils, greases, waxes) that do not become an integral part of the finished wire product.
The document is structured to address:
- characteristics and tests of coating materials as supplied (Clause 4),
- properties and tests of the coating after application to wire (Clause 5),
- performance requirements and exposure testing of the finished coated wire (Clause 6).
Key topics and technical requirements
EN 10245-1:2011 specifies requirements and test methods for both coating materials and finished organic coatings, including:
- Composition and colour of coating materials and applied coatings
- Physical properties: apparent density, Shore hardness, tensile strength and elongation, melt flow / extrusion index, shelf life
- Appearance and finish: gloss, colour matching, surface appearance
- Coating dimensions and quality: thickness measurement and adherence (adhesion) testing
- Mechanical and electrical checks: impact (mechanical shock) resistance and spark testing
- Performance testing: accelerated weathering (artificial light), salt spray (corrosion), humidity exposure, sulphur dioxide in humid atmosphere and long‑term natural weathering
The standard references applicable test methods and normative documents (e.g., EN/ISO methods for density, gloss, colour measurement, Shore hardness, salt spray and weathering tests).
Applications and users
EN 10245-1 is intended for:
- Wire manufacturers and coating applicators specifying and validating organic coatings on steel wire
- Quality assurance and test laboratories performing acceptance and performance tests
- Product engineers, procurement specialists and specifiers creating technical specifications for coated wire products
- Standards and compliance teams ensuring harmonized testing and reporting across the EU market
Typical practical uses include selection and verification of coating material for durability, adhesion and aesthetic performance, and defining acceptance criteria during manufacture and inspection.
Related standards
This Part 1 is the general rules element of a series. Related parts include:
- EN 10245-2: PVC finished wire
- EN 10245-3: PE coated wire
- EN 10245-4: Polyester coated wire
- EN 10245-5: Polyamide coated wire
Normative references used by EN 10245-1 include EN 10021, EN 10218 series, EN ISO 2813 (gloss), EN ISO 4892 (light exposure), EN ISO 9227 (salt spray), EN ISO 6270 (humidity) and others for standard test procedures.
Frequently Asked Questions
EN 10245-1:2011 is a standard published by the European Committee for Standardization (CEN). Its full title is "Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules". This standard covers: This European Standard specifies the requirements for the characteristics and testing methods for organic coatings made of organic coating material suitable for the application on to steel wire and wire products of circular or other sections. Other organic materials which are applied intentionally or otherwise such as oils, greases, waxes and temporary finishes which do not become integral or a permanent part of the finished wire product are excluded from this standard This European Standard is divided in a number of parts, with Part 1 covering the requirements of a general nature and applies to organic coatings and coating material for which no specific requirements have been established in the subsequent parts of prEN 10245.
This European Standard specifies the requirements for the characteristics and testing methods for organic coatings made of organic coating material suitable for the application on to steel wire and wire products of circular or other sections. Other organic materials which are applied intentionally or otherwise such as oils, greases, waxes and temporary finishes which do not become integral or a permanent part of the finished wire product are excluded from this standard This European Standard is divided in a number of parts, with Part 1 covering the requirements of a general nature and applies to organic coatings and coating material for which no specific requirements have been established in the subsequent parts of prEN 10245.
EN 10245-1:2011 is classified under the following ICS (International Classification for Standards) categories: 25.220.60 - Organic coatings; 77.140.65 - Steel wire, wire ropes and link chains. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10245-1:2011 has the following relationships with other standards: It is inter standard links to EN 10245-1:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN 10245-1:2011 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SUDYLODStahldraht und Drahterzeugnisse - Organische Beschichtungen auf Draht - Teil 1: Allgemeine RegelnFils et produits tréfilés en acier - Revêtements organiques sur fils d'acier - Partie 1: Principes générauxSteel wire and wire products - Organic coatings on steel wire - Part 1: General rules77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chains25.220.60Organske prevlekeOrganic coatingsICS:Ta slovenski standard je istoveten z:EN 10245-1:2011SIST EN 10245-1:2012en,de01-januar-2012SIST EN 10245-1:2012SLOVENSKI
STANDARDSIST EN 10245-1:20021DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10245-1
October 2011 ICS 25.220.60; 77.140.65 Supersedes EN 10245-1:2001English Version
Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
Fils et produits tréfilés en acier - Revêtements organiques sur fils d'acier - Partie 1: Principes généraux
Stahldraht und Drahterzeugnisse - Organische Beschichtungen auf Stahldraht - Teil 1: Allgemeine RegelnThis European Standard was approved by CEN on 17 September 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10245-1:2011: ESIST EN 10245-1:2012
Part 1: General Rules; Part 2: PVC finished wire; Part 3: PE coated wire; Part 4: Polyester coated wire; Part 5: Polyamide coated wire. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
Other organic materials which are applied intentionally or otherwise such as oils, greases, waxes and temporary finishes which do not become integral or a permanent part of the finished wire product are excluded from this standard
(ISO 2811-1:2011) EN ISO 2811-2, Paints and varnishes — Determination of density — Part 2: Immersed body (plummet) method (ISO 2811-2:2011) EN ISO 2811-3, Paints and varnishes — Determination of density — Part 3: Oscillation method
(ISO 2811-3:2011) EN ISO 2811-4, Paints and varnishes — Determination of density — Part 4: Pressure cup method
(ISO 2811-4:2011) SIST EN 10245-1:2012
NOTE Once polymerized and made insoluble they cannot be remelted. These materials include polyester and epoxy coatings. These materials are typically applied by electrostatic powder spray. 3.2.3 plastisols/organosols suspension of fine particles of inorganic materials such as resins, PVC, etc carried in an organic fluid or solvents NOTE After immersion or spraying, exposure to heat causes the plastisol to melt to form a solid continuous flexible organic coating. 3.2.4 paint material coloured with organic and sometimes inorganic components, dispersed in oils or water NOTE They are applied in liquid form to the surface of the wire and after air drying they form a continuous adherent film on the wire. Application is by brush, rol
...
The standard EN 10245-1:2011 outlines essential guidelines regarding the characteristics and testing methods for organic coatings applied to steel wire and wire products. Its comprehensive scope facilitates the establishment of a uniform approach across various applications, ensuring that the organic coatings used enhance the performance and longevity of steel wire products. One of the primary strengths of this standard is its focus on organic coating materials that are specifically suitable for steel wire, thus ensuring compatibility and efficacy. By excluding substances like oils, greases, waxes, and temporary finishes that do not permanently integrate into the wire product, EN 10245-1:2011 maintains clarity and precision in what constitutes acceptable organic coatings. This exclusion helps manufacturers and users distinguish between permanent and temporary products, ultimately contributing to better quality control. Furthermore, the division of this standard into multiple parts allows for a systematic approach to address the various aspects of organic coatings on steel wire, with Part 1 specifically setting a general framework. This structure ensures that as new materials or applications emerge, the standard can be updated or expanded without disrupting the established principles laid out in this initial part. The relevance of EN 10245-1:2011 extends to various industries, including construction, automotive, and manufacturing, where steel wire is frequently utilized. The emphasis on standardized organic coatings enhances product performance, durability, and resistance to environmental factors, ultimately benefiting end-users and manufacturers alike. In summary, this standard serves as a crucial reference point for ensuring the integrity and quality of organic coatings applied to steel wire and wire products.
SIST EN 10245-1:2012 문서는 강철 와이어 및 와이어 제품에 적용되는 유기 코팅의 일반적인 규칙을 명확하게 규정하고 있습니다. 이 표준의 범위는 유기 코팅 재료로 구성된 유기 코팅의 특성 및 시험 방법의 요구 사항을 specifies하며, 이는 원형 또는 기타 단면을 가진 강철 와이어 및 와이어 제품에 적합합니다. 강점으로는, 이 표준이 유기 코팅 내에서 일반적인 요건을 포괄적으로 다룬다는 점입니다. 이 표준은 후속 부분에서 특정 요구 사항이 설정되지 않은 유기 코팅 및 코팅 재료에 적용되며, 이는 산업 전반에 걸쳐 일관된 품질 기준을 유지하는 데 기여합니다. 따라서 EN 10245-1:2011 표준은 유기 코팅이 적용된 강철 제품의 신뢰성을 높이고, 품질 보증 및 관리의 중요성을 강조하는 데 효과적입니다. 본 표준은 또한, 의도적으로 또는 그 외의 방법으로 적용되는 기타 유기 물질(예: 기름, 그리스, 왁스 및 임시 마감 처리)은 제외함으로써, 유기 코팅의 정의와 적용 범위를 명확히 함으로써 혼란을 줄이고 명료성을 제공합니다. 이러한 점을 통해 전문가, 제조업체 및 연구자 모두가 유기 코팅의 양질을 보장할 수 있는 기초를 마련하고 있습니다. 결론적으로, SIST EN 10245-1:2012는 유기 코팅 적용에 있어 필수적인 기준을 제공하며, 이를 통해 강철 와이어 및 와이어 제품의 품질과 성능 향상에 기여하는 점에서 중요한 문서입니다.
SIST EN 10245-1:2012は、鋼線および鋼線製品に使用される有機コーティングに関する標準であり、その基本的な要件や試験方法を明確に定めています。この標準は、鋼線や他の断面を持つ鋼線製品への適用に適した有機コーティング材の特性に焦点を当てています。 この標準の特筆すべき点は、特にその他の有機材料、すなわち油、グリース、ワックス、仮仕上げなど、最終製品の一部として恒久的に組み込まれないものが除外されていることです。このことは、標準が特定の有機コーティング材に特化しているため、適用範囲が明確であり、エンドユーザーにとっても分かりやすい基準を提供しています。 また、EN 10245-1:2011は、後続の部分で具体的な要件が定められていない有機コーティングとコーティング材料に関する一般的な要件をカバーしており、その汎用性が強調されています。この柔軟性は、様々な用途において業界のニーズに応えるものとなっており、特に鋼線業界において重要な役割を果たします。 さらに、SIST EN 10245-1:2012の合格基準や試験方法は、業界内での標準化を促進し、品質管理を強化するための基盤となるでしょう。これにより、製造者や消費者は、一貫性のある高品質な製品を市場に提供できるため、競争力の向上にも寄与します。 全体として、EN 10245-1:2011は、有機コーティングにおける基準を確立し、業界全体の信頼性と安全性を向上させるための非常に重要な標準であると言えます。
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...