iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 640:1994

(Main)

Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings

Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings

This standard covers the requirements and manufacture of circumferentially reinforced concrete pressure pipe, without steel cylinder and not circumferentially prestressed, with steel reinforcement (RCP) or a homogeneouslydistributed reinforcement composed of multiple layers of small diameter wires (DRP). Pipes shall have diameter ranging DN/ID 300 to DN/ID 4000. Larger size could be manufactured based on the concepts of this standard.

Stahlbetondruckrohre und Betondruckrohre mit verteilter Bewehrung (ohne Blechmantel) einschließlich Rohrverbindungen und Formstücken

Die vorliegende Norm behandelt die Anforderungen und die Herstellung von ringförmig bewehrten Stahlbetondruckrohren, ohne Blechmantel und ohne ringförmige Vorspannung (RCP), sowie Druckrohren mit gleichmässig verteilter Bewehrung aus mehreren Schichten von Drähten mit kleinem Durchmesser (DRP). DieRohrdurchmesser liegen zwischen DN/ID 300 und DN/ID 4000. Größere Rohrdurchmesser können auf der Grundlage dieser Norm hergestellt werden.

Tuyaux pression en béton armé et tuyaux pression à armature diffuse (sans âme en tôle), y compris joints et pièces spéciales

Cette norme couvre les prescriptions et la fabrication des tuyaux pression en béton avec armatures circulaires, sans âme en tôle et sans précontrainte circonférentielle, avec armatures en acier (RCP) ou avec une armature répartie de façon homogène et composée de plusieurs nappes de fils de petit diamètre (DRP). Les diamètres des tuyaux s'échelonnent entre DN/ID 300 et DN/ID 4000. Destuyaux de diamètres plus importants peuvent être fabriqués à partir des principes de cette norme.

Armiranobetonske tlačne cevi in betonske tlačne cevi s porazdeljeno armaturo (brez kovinskega plašča), skupaj s spoji in fazonskimi kosi

General Information

Status
Published
Publication Date
30-Oct-1994
Withdrawal Date
29-Apr-1995
ICS
23.040.10 - Iron and steel pipes
23.040.40 - Metal fittings
Technical Committee
CEN/TC 164 - Water supply
Drafting Committee
CEN/TC 164 - Water supply
Current Stage
9020 - Submission to 2 Year Review Enquiry - Review Enquiry
Start Date
15-Jul-2024
Completion Date
15-Jul-2024
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
Mandate
M/BC/CEN/88/15 - Standardization request to CEN/CENELEC in the field of Water supply, drainage and sewerage
Ref Project
SIST EN 640:1996 - Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings

Buy Standard

EN 640:1996EN 640:1996
PreviousNext
Standard
EN 640:1996
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-1996
$UPLUDQREHWRQVNHWODþQHFHYLLQEHWRQVNHWODþQHFHYLVSRUD]GHOMHQRDUPDWXUR
EUH]NRYLQVNHJDSODãþD VNXSDMVVSRMLLQID]RQVNLPLNRVL
Reinforced concrete pressure pipes and distributed reinforcement concrete pressure
pipes (non-cylinder type), including joints and fittings
Stahlbetondruckrohre und Betondruckrohre mit verteilter Bewehrung (ohne Blechmantel)
einschließlich Rohrverbindungen und Formstücken
Tuyaux pression en béton armé et tuyaux pression a armature diffuse (sans âme en
tôle), y compris joints et pieces spéciales
Ta slovenski standard je istoveten z: EN 640:1994
ICS:
23.040.50 Cevi in fitingi iz drugih Pipes and fittings of other
materialov materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TR 17996:2024(Main)
Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Guidelines for Pipelines Installation
SIST-TP CEN/TR 17996:2024

This European Standard is a complementary document for the installation of ductile iron pipes, fittings, accessories and their joints, covered by EN 598:2009 harmonized standard. It is intended to describe, in a wider perspective, installation technologies, tools and pipelines particular examples, applicable for the construction, outside buildings, of:
-   Drainage pipeline systems;
-   Raw water pipeline systems;
-   Sewage pipeline systems;
-   Pipeline systems conveying surface water (e.g. rainwater), domestic waste water and/or certain types of industrial effluents, either in separate systems or in combined systems;
-   Operating without pressure (gravity sewers) or with positive or negative pressure;
-   Below or above ground installation types.
It also gives some site operation/site instructions for the application of fittings, intended to be used for the connection of ductile iron drains and sewers to other materials as plastic, concrete, vitrified clay, etc.
This European Standard is not intended to cover:
-   Hydraulic design of drains and sewers systems outside buildings. For this purpose, EN 16933-2 applies.
-   Construction and site testing of drains and sewers. For this purpose, EN 1610 applies.
-   Trenchless construction and testing of drains and sewers. For this purpose, EN 12889:2000 applies

  • Technical report
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15655-2:2020(Main)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes
SIST EN 15655-2:2021

This document specifies the requirements and test methods applicable to factory applied internal lining made of thermoplastic acid modified polyolefin (TMPO) for the heavy duty corrosion protection of ductile iron pipes conforming to EN 545, EN 598 and EN 969. This document also applies to pipes with only socket and spigot ends coated with TMPO. Fittings and accessories are covered separately by EN 14901-2.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14628-1:2020(Main)
Ductile iron pipes, fittings and accessories - Requirements and test methods - Part 1: PE coatings
SIST EN 14628-1:2020

This document specifies the requirements and test methods applicable to factory applied extruded polyethylene coatings for the external corrosion protection of ductile iron pipes according to EN 545, EN 598 and EN 969 for use at operating temperatures up to 50 °C.
This document is not applicable to ductile iron pipes protected with thin PE sleeve. Special works at site like drilling, tapping, etc. can influence the corrosion protection properties. Those job steps are intended to be included in the instructions of pipe saddle and accessory manufacturers and all other essential installation instructions. These instructions are not part of this document.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14901-2:2019(Main)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2: Thermoplastic acid modified polyolefin coating (TMPO)
SIST EN 14901-2:2020

This document defines the requirements and test methods for factory applied thermoplastic acid modified polyolefin (TMPO) coatings used for the protection of ductile iron fittings and accessories according to EN 545, EN 598, EN 969, EN 12842 and EN 14525:
-   conveying water (e.g. potable water, raw water, …) at operating temperature up to 50 °C; or
-   conveying waste water at operating temperature up to 45 °C; or
-   conveying gas at operating temperature up to 50 °C;
-   suitable for external environments, i.e. soils, waters and atmospheres of all common corrosion loads, characterized in D.2.3 of EN 545:2010.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14901-1:2014+A1:2019(Main + Amendment)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1: Epoxy coating (heavy duty)
SIST EN 14901-1:2014+A1:2020

This European Standard defines the requirements and test methods for factory applied epoxy coatings (fusion bonded powder or liquid two-pack) used for the corrosion protection of ductile iron fittings and accessories conforming to EN 545, EN 598, EN 969, EN 12842, EN 14525, for:
-   conveying water (e.g. potable water) at operating temperature up to 50 °C excluding frost; or
-   conveying waste water at operating temperature up to 45 °C excluding frost; or
-   conveying gas at operating temperature up to 50 °C;
-   suitable for external environments, i.e. soils, waters and atmospheres of all common corrosion loads, characterized in EN 545:2010, D.2.3.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15655-1:2018(Main)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipes and fittings
SIST EN 15655-1:2019

This European Standard defines the requirements and test methods applicable to factory applied internal polyurethane high duty corrosion protection of buried ductile iron pipes and fittings conforming to EN 545, EN 598 and EN 969 for use at permanent operating temperatures up to 45 °C

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16950:2016(Main)
Ductile iron pipes, fittings and accessories - Sanitary characteristics and test methods
SIST-TP CEN/TR 16950:2017

This Technical Report contains the sanitary characteristics and test methods applicable to those factory applied lining, coating and jointing materials of ductile iron pipes and fittings conforming to EN 545 which are in contact with water intended for human consumption for use at operating temperatures up to 50 °C. Ductile cast iron itself is not in direct contact with the conveyed water therefore no characteristics in respect to the sanitary behaviour are necessary. As ductile cast iron is impermeable against diffusion of organic substances the water quality is maintained in service. Different surface/volume ratios are used in the tests for pipes, fittings and joints to reflect the different impact of their surface areas exposed to the water in the overall pipeline.

  • Technical report
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1124-2:2014(Main)
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S, forms and dimensions
SIST EN 1124-2:2014

This European Standard applies to pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems and specifies dimensions and tolerances for pipes, fittings and pipe connectors and establishes a system of designations for the different pipe and fitting types that conform to the stated requirements.
This part of EN 1124 is only valid in connection with EN 1124 1.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1124-4:2013(Main)
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships
SIST EN 1124-4:2013

This European Standard specifies requirements, dimensions and tolerances for pipes and fittings of longitudinally welded, stainless steel pipe with spigot and socket used for vacuum drainage systems inside and outside buildings and for gravity and vacuum drainage systems on ships and floating maritime structures ) :
-   above freeboard deck as long as the heeling is taken into account in the event of damage when installed above freeboard deck on passenger ships;
-   inside a watertight compartment below freeboard deck;
-   with direct connection to the outboard (not permitted below freeboard deck);
-   inside tanks as long as these are not filled with foreign media and are not cargo tanks.
On well-anchored maritime structures, this European Standard applies to pipes and fittings of longitudinally welded stainless steel pipe with spigot and socket used in drainage systems in the accommodation area.
Pipes and fittings according to this European Standard may also be used in central vacuum cleaning installations, in vacuum suction lifting installations, in chip transporting installations and in other waste water and process pipes as long as the media to be discharged do not damage the components or the health and safety of the personnel.
For other pipes, this European Standard only applies if agreed with the relevant operators and following prior consultation with the manufacturer.
This European Standard contains a designation system for the different types of pipes and fittings for easy identification of each component.
This European Standard is only applicable in conjunction with EN 1124-1.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16470:2013(Main)
Environmental aspects of ductile iron pipe systems for water and sewerage applications
SIST-TP CEN/TR 16470:2013

This Technical Report applies to all water and sewerage applications of ductile iron pipe systems and provides a structure on how to identify and consider environmental aspects and potential environmental impacts of ductile iron pipe systems throughout their life cycle.
This Technical Report gives guidance on how the life cycle of ductile iron pipelines should be considered in accordance with EN ISO 14044. This Technical Report also includes health and safety aspects related to the production, use and recycling of ductile iron pipe systems.

  • Technical report
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day