EN 3388:2009

Aerospace series - Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification 1 275 MPa/650 °C - Manufacturing method optional - Technical specification

This standard specifies the technical and quality assurance requirements for externally threaded fasteners in material NI-PH2601 (Inconel 718) of tensile strength class 1 275 MPa at room temperature, maximum test temperature of material 650 °C.
The externally threaded fasteners specified herein may be manufactured by machining from bar or by forging at the manufacturer's option, if forged there is no requirement for control of grainflow.
Primarily for Aerospace applications it is applicable to such externally threaded fasteners when referenced on the product standard or drawing.

Luft- und Raumfahrt - Verbindungselemente mit Außengewinde aus hochwarmfester Nickelbasislegierung NI-PH2601 (Inconel 718) - Klasse : 1 275 MPa/650 °C - Herstellverfahren nach Wahl - Technische Lieferbedingungen

Diese Norm legt die technischen Anforderungen und die Anforderungen an die Qualitätssicherung für
Verbindungselemente mit Außengewinde aus dem Werkstoff NI-PH2601 (Inconel 718), Zugfestigkeitsklasse
1 275 MPa bei Raumtemperatur, maximale Prüftemperatur des Werkstoffes 650 °C, fest.
Die in dieser Norm festgelegten Verbindungselemente mit Außengewinde können nach Wahl des Herstellers
durch Zerspanen von Stangen oder durch Schmieden hergestellt werden, bei geschmiedeten Verbindungselementen
ist keine Überprüfung des Faserverlaufs erforderlich.
Diese Norm gilt in erster Linie für Anwendungszwecke im Bereich Luft- und Raumfahrt und ist für diejenigen
Verbindungselemente mit Außengewinde anzuwenden, bei denen in der zugehörigen Produktnorm oder
Zeichnung auf sie verwiesen wird.

Série aérospatiale - Eléments de fixation, filetés, en alliage base nickel résistant à chaud NI-PH2601 (Inconel 718) - Classification : 1 275MPa/650 °C - Mode de fabrication non imposé - Spécification technique

Aeronavtika - Vezni elementi z zunanjim navojem iz toplotnoodporne zlitine na nikljevi osnovi NI-PH2601 (Inconel 718) - Klasifikacija: 1275 MPa/650 °C - Metoda izdelave po izbiri - Tehnična specifikacija

General Information

• Status: Published
• Publication Date: 07-Apr-2009
• Withdrawal Date: 30-Oct-2009
• ICS: 49.030.20 - Bolts, screws, studs
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 3388:2009 - Aerospace series - Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 275 MPa/650 °C - Manufacturing method optional - Technical specification

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Verbindungselemente mit Außengewinde aus hochwarmfester Nickelbasislegierung NI-PH2601 (Inconel 718) - Klasse : 1 275 MPa/650 °C - Herstellverfahren nach Wahl - Technische LieferbedingungenSérie aérospatiale - Eléments de fixation, filetés, en alliage base nickel résistant à chaud NI-PH2601 (Inconel 718) - Classification: 1 275MPa/650 °C - Mode de fabrication non imposé - Spécification techniqueAerospace series - Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 275 MPa/650 °C - Manufacturing method optional - Technical specification49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3388:2009SIST EN 3388:2009en01-junij-2009SIST EN 3388:2009SLOVENSKI
STANDARD



SIST EN 3388:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3388
April 2009 ICS 49.030.20 English Version
Aerospace series - Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification 1 275 MPa/650 °C - Manufacturing method optional - Technical specification
Série aérospatiale - Eléments de fixation, filetés, en alliage base nickel résistant à chaud NI-PH2601 (Inconel 718) - Classification : 1 275MPa/650 °C - Mode de fabrication non imposé - Spécification technique
Luft- und Raumfahrt - Verbindungselemente mit Außengewinde aus hochwarmfester Nickelbasislegierung NI-PH2601 (Inconel 718) - Klasse : 1 275 MPa/650 °C - Herstellverfahren nach Wahl - Technische Lieferbedingungen This European Standard was approved by CEN on 5 October 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3388:2009: ESIST EN 3388:2009



EN 3388:2009 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .54Certification and quality assurance .6
SIST EN 3388:2009



EN 3388:2009 (E) 3 Foreword This document (EN 3388:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2009, and conflicting national standards shall be withdrawn at the latest by October 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Irela
...