Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 2: Guidance for the assessment of conformity

This Technical Specification gives guidance for the assessment of conformity of materials, products, joints and assemblies in accordance with the applicable part(s) of EN 14758 intended to be included in the manufacturer’s quality plan as part of the quality management system and for the establishment of certification procedures.
NOTE   In order to help the reader, a basic test matrix is given in Annex A.
In conjunction with EN 14758 1 this document is applicable to solid wall piping systems made of polypropylene modified with mineral(s) (PP-MD) intended to be used for:
—   non-pressure underground drainage and sewerage outside the building structure (application area code “U”); and
—   non-pressure underground drainage and sewerage for both buried in ground within the building structure (application area code “D”) and outside the building structure.
This is reflected in the marking of products by “U” and “UD”.

Kunststoff-Rohrleitungssysteme für erdverlegte drucklose Abwasserkanäle und -leitungen - Polypropylen mit mineralischen Additiven (PP-MD) - Teil 2: Empfehlungen für die Beurteilung der Konformität

Diese Technische Spezifikation gibt Empfehlungen für die Beurteilung der Konformität von Werkstoffen, Erzeugnissen, Verbindungen und Bauteilkombinationen, die, in Übereinstimmung mit den/dem entsprechenden Teil(en) von EN 14758, für eine Einbeziehung in den Qualitäts-sicherungsplan des Herstellers als Teil des Qualitätsmanagementsystems und für die Erstellung von Zertifizierungsverfahren vorgesehen sind.
ANMERKUNG   Zur Unterstützung der Leser enthält Anhang A einen Überblick über das Prüfsystem.
Dieses Dokument gilt in Verbindung mit EN 14758-1 für Vollwand-Rohrleitungssysteme aus Polypropylen mit mineralischen Additiven (PP-MD), die für folgende Verwendungszwecke vorgesehen sind:
—   für erdverlegte drucklose Abwasserkanäle und -leitungen für Anwendungen außerhalb der Gebäudestruktur (Anwendungskennzeichen „U“); und
—   für erdverlegte drucklose Abwasserkanäle und -leitungen für Anwendungen sowohl erdverlegt innerhalb der Gebäudestruktur (Anwendungs¬kennzeichen „D“) als auch außerhalb der Gebäude-struktur.
Dies wird durch die Kennzeichnung auf dem Erzeugnis durch „U“ und „UD“ angezeigt.

Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Polypropylène avec modificateurs minéraux (PP-MD) - Partie 2 : Guide pour l'évaluation de la conformité

La présente spécification technique fournit un guide pour l’évaluation de conformité des matières, produits, assemblages et montages en conformité avec la (les) partie(s) appropriée(s) de l'EN 14758 destiné à être inclus dans le plan qualité du fabricant dans le cadre du système de management de la qualité et pour l'établissement des procédures de certification.
NOTE   Afin d'aider le lecteur, une matrice d'essais de base est fournie en Annexe A.
Conjointement avec l'EN 14758 1, le présent document s'applique aux systèmes de canalisations à paroi compacte en polypropylène avec modificateurs minéraux (PP MD) destinés à être utilisés pour:
—   les branchements et les collecteurs d'assainissement sans pression enterrés à l'extérieur de la structure du bâtiment (code de zone d'application « U ») ; et
—   les branchements et les collecteurs d’assainissement sans pression enterrés aussi bien à l’intérieur de la structure du bâtiment (code de zone d’application « D ») qu’à l’extérieur de la structure du bâtiment.
Ceci se traduit dans le marquage des produits par « U » et « UD ».

Cevni sistemi iz polimernih materialov za odvodnjavanje in kanalizacijo, ki delujejo po težnostnem principu - Polipropilen z mineralnimi modifikatorji (PP-MD) - 2. del: Smernice za ugotavljanje skladnosti

Ta tehnična specifikacija podaja navodila za ugotavljanje skladnosti materialov, proizvodov, spojev in sestavov v skladu z ustreznimi deli standarda EN 14758, pri čemer naj bi se te informacije vključile v poslovnik kakovosti proizvajalca kot del sistema vodenja kakovosti in za vzpostavitev postopka certificiranja. Ta dokument se v povezavi s standardom EN 14758-1 uporablja za cevne sisteme v trdnih stenah, izdelane iz polipropilena z mineralnim modifikatorjem (PP-MD), ki naj bi se uporabljali za: – podzemne sisteme odvodnjavanja in kanalizacijske sisteme zunaj stavbne konstrukcije, ki delujejo po težnostnem principu (koda območja uporabe »U«), in – podzemne sisteme odvodnjavanja in kanalizacijske sisteme, ki delujejo po težnostnem principu in so vkopani v zemljo znotraj stavbne konstrukcije (koda območja uporabe »D«) in zunaj nje. To je razvidno iz oznak »U« in »UD« na proizvodih.

General Information

Status
Published
Publication Date
12-Jul-2016
Current Stage
9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
Completion Date
21-Aug-2020

Relations

Buy Standard

Technical specification
TS CEN/TS 14758-2:2016
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
kTS FprCEN/TS 14758-2:2016
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 14758-2:2016
01-september-2016
1DGRPHãþD
SIST-TS CEN/TS 14758-2:2007
Cevni sistemi iz polimernih materialov za odvodnjavanje in kanalizacijo, ki delujejo
po težnostnem principu - Polipropilen z mineralnimi modifikatorji (PP-MD) - 2. del:
Smernice za ugotavljanje skladnosti
Plastics piping systems for non-pressure underground drainage and sewerage -
Polypropylene with mineral modifiers (PP-MD) - Part 2: Guidance for the assessment of
conformity
Kunststoff-Rohrleitungssysteme für erdverlegte drucklose Abwasserkanäle und -
leitungen - Polypropylen mit mineralischen Additiven (PP-MD) - Teil 2: Empfehlungen für
die Beurteilung der Konformität
Systèmes de canalisations en plastique pour les branchements et les collecteurs
d'assainissement enterrés sans pression - Polypropylène avec modificateurs minéraux
(PP-MD) - Partie 2 : Guide pour l'évaluation de la conformité
Ta slovenski standard je istoveten z: CEN/TS 14758-2:2016
ICS:
23.040.05 Cevovodi za zunanje Pipeline and its parts for
sisteme za odpadno vodo in external sewage systems
njihovi deli
93.030 Zunanji sistemi za odpadno External sewage systems
vodo
SIST-TS CEN/TS 14758-2:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 14758-2:2016

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 14758-2:2016


CEN/TS 14758-2
TECHNICAL SPECIFICATION

SPÉCIFICATION TECHNIQUE

July 2016
TECHNISCHE SPEZIFIKATION
ICS 23.040.01; 93.030 Supersedes CEN/TS 14758-2:2007
English Version

Plastics piping systems for non-pressure underground
drainage and sewerage - Polypropylene with mineral
modifiers (PP-MD) - Part 2: Guidance for the assessment of
conformity
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für erdverlegte
branchements et les collecteurs d'assainissement drucklose Abwasserkanäle und -leitungen -
enterrés sans pression - Polypropylène avec Polypropylen mit mineralischen Additiven (PP-MD) -
modificateurs minéraux (PP-MD) - Partie 2 : Guide Teil 2: Empfehlungen für die Beurteilung der
pour l'évaluation de la conformité Konformität
This Technical Specification (CEN/TS) was approved by CEN on 9 June 2016 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 14758-2:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 14758-2:2016
CEN/TS 14758-2:2016 (E)
Contents Page

European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Abbreviated terms . 8
5 General .
...

SLOVENSKI STANDARD
kSIST-TS FprCEN/TS 14758-2:2016
01-april-2016
Cevni sistemi iz polimernih materialov za odvodnjavanje in kanalizacijo, ki delujejo
po težnostnem principu - Polipropilen z mineralnimi modifikatorji (PP-MD) - 2. del:
Smernice za ugotavljanje skladnosti
Plastics piping systems for non-pressure underground drainage and sewerage -
Polypropylene with mineral modifier(s) (PP-MD) - Part 2: Guidance for the assessment of
conformity
Kunststoff-Rohrleitungssysteme für erdverlegte drucklose Abwasserkanäle und -
leitungen - Polypropylen mit mineralischen Additiven (PP-MD) - Teil 2: Empfehlungen für
die Beurteilung der Konformität
Systèmes de canalisations en plastique pour les branchements et les collecteurs
d'assainissement enterrés sans pression - Polypropylène avec modificateurs minéraux
(PP-MD) - Partie 2 : Guide pour l'évaluation de la conformité
Ta slovenski standard je istoveten z: FprCEN/TS 14758-2
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
93.030 Zunanji sistemi za odpadno External sewage systems
vodo
kSIST-TS FprCEN/TS 14758-2:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

kSIST-TS FprCEN/TS 14758-2:2016

---------------------- Page: 2 ----------------------

kSIST-TS FprCEN/TS 14758-2:2016


FINAL DRAFT
TECHNICAL SPECIFICATION
FprCEN/TS 14758-2
SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION

February 2016
ICS Will supersede CEN/TS 14758-2:2007
English Version

Plastics piping systems for non-pressure underground
drainage and sewerage - Polypropylene with mineral
modifiers (PP-MD) - Part 2: Guidance for the assessment of
conformity
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für erdverlegte
branchements et les collecteurs d'assainissement drucklose Abwasserkanäle und -leitungen -
enterrés sans pression - Polypropylène avec Polypropylen mit mineralischen Additiven (PP-MD) -
modificateurs minéraux (PP-MD) - Partie 2 : Guide Teil 2: Empfehlungen für die Beurteilung der
pour l'évaluation de la conformité Konformität


This draft Technical Specification is submitted to CEN members for Vote. It has been drawn up by the Technical Committee
CEN/TC 155.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a Technical Specification. It is distributed for review and comments. It is subject to change
without notice and shall not be referred to as a Technical Specification.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

E UR O PÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TS 14758-2:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

kSIST-TS FprCEN/TS 14758-2:2016
FprCEN/TS 14758-2:2016 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Abbreviated terms . 9
5 General . 9
6 Testing and inspection . 9
6.1 Material specification .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.