EN 14469-2:2004
(Main)Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens
Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens
This Part of EN 14469 specifies a procedure for preparing test samples for the testing of colouring materials ) in plasticized polyvinyl chloride (PVC-P) materials. It describes the manner in which basic mixtures as defined in EN 14469 -1 and pigments and pigment preparations are to be used to prepare test samples for the testing of particular pigment properties. The standard is applicable to inorganic and organic pigments, and also to pigment preparations in powder, paste or granular form (see Annex A (informative)).
Pigmente und Füllstoffe - Prüfung von Farbmitteln in weichmacherhaltigem Polyvinylchlorid (PVC-P) - Teil 2: Herstellen der Probenkörper
Dieser Teil von EN 14469 legt ein Verfahren zum Herstellen von Probenkörpern für die Prüfung von Farbmitteln ) in weichmacherhaltigem Polyvinylchlorid (PVC-P) fest. Es wird beschrieben, wie aus Grundmischungen nach prEN 14469-1 und Pigmenten sowie Pigmentpräparationen Probenkörper für die Prüfung bestimmter Pigmenteigenschaften herzustellen sind. Die Norm ist anwendbar für anorganische und organische Pigmente sowie für pulverförmige, pastenförmige und granulierte Pigmentpräparationen (siehe Anhang A (informativ)).
Pigments et matières de charge - Essai des matières colorantes dans le chlorure de polyvinyle plastifié (PVC-P) - Partie 2: Préparation des éprouvettes
Pigmenti in polnila - Preskušanje sredstev za obarvanje v mehčanem polivinilkloridu (PVC-P) - 2. del: Priprava preskusnih vzorcev
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.PPigmente und Füllstoffe - Prüfung von Farbmitteln in weichmacherhaltigem Polyvinylchlorid (PVC-P) - Teil 2: Herstellen der ProbenkörperPigments et matieres de charge - Essai des matieres colorantes dans le chlorure de polyvinyle plastifié (PVC-P) - Partie 2: Préparation des éprouvettesPigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens83.040.30Pomožni materiali in aditivi za polimerne materialeAuxiliary materials and additives for plasticsICS:Ta slovenski standard je istoveten z:EN 14469-2:2004SIST EN 14469-2:2004en01-september-2004SIST EN 14469-2:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14469-2April 2004ICS 83.040.30English versionPigments and extenders - Testing of colouring materials inplasticized polyvinyl chloride (PVC-P) - Part 2: Preparation oftest specimensPigments et matières de charge - Essai des matièrescolorantes dans le chlorure de polyvinyle plastifié (PVC-P) -Partie 2: Préparation des éprouvettesPigmente und Füllstoffe - Prüfung von Farbmitteln inweichmacherhaltigem Polyvinylchlorid (PVC-P) - Teil 2:Herstellen der ProbenkörperThis European Standard was approved by CEN on 2 February 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14469-2:2004: ESIST EN 14469-2:2004
inplasticized polyvinyl chloride (PVC-P) materials. It describes the manner in which basic mixtures as defined inEN 14469-1 and pigments and pigment preparations are to be used to prepare test samples for the testing ofparticular pigment properties. The standard is applicable to inorganic and organic pigments, and also to pigmentpreparations in powder, paste or granular form (see annex A (informative)).2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN ISO 15528, Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2000).3 Apparatus3.1 Mixing vessel3.2 Two-roll millwhich can be heated, with rolls whose separation can be adjusted, roll diameters shall be between 80 mm and200 mm, ratio of the speeds of rotation of the two rollers shall be between 1:1,1 and 1:1,2.NOTEThe rolls used should preferably have a chromed surface.3.3 Plate press (if required according to 5.3)which can be heated and coole
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.