EN ISO 1043-4:2021
(Main)Plastics - Symbols and abbreviated terms - Part 4: Flame retardants (ISO 1043-4:2021)
Plastics - Symbols and abbreviated terms - Part 4: Flame retardants (ISO 1043-4:2021)
This document provides uniform symbols for flame retardants added to plastics materials.
Kunststoffe - Kennbuchstaben und Kurzzeichen - Teil 4: Flammschutzmittel (ISO 1043-4:2021)
Dieses Dokument stellt einheitliche Kennbuchstaben für Flammschutzmittel, die in Kunststoffen eingesetzt werden, zur Verfügung.
Plastiques - Symboles et termes abrégés - Partie 4: Ignifuges (ISO 1043-4:2021)
Le présent document fournit des symboles uniformes à utiliser pour qualifier les ignifuges ajoutés aux matériaux plastiques.
Polimerni materiali - Simboli in kratice - 4. del: Zaviralci gorenja (ISO 1043-4:2021)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 1043-4:2021
01-oktober-2021
Nadomešča:
SIST EN ISO 1043-4:2000
SIST EN ISO 1043-4:2000/A1:2016
Polimerni materiali - Simboli in kratice - 4. del: Zaviralci gorenja (ISO 1043-4:2021)
Plastics - Symbols and abbreviated terms - Part 4: Flame retardants (ISO 1043-4:2021)
Kunststoffe - Kennbuchstaben und Kurzzeichen - Teil 4: Flammschutzmittel (ISO 1043-
4:2021)
Plastiques - Symboles et termes abrégés - Partie 4: Ignifuges (ISO 1043-4:2021)
Ta slovenski standard je istoveten z: EN ISO 1043-4:2021
ICS:
01.075 Simboli za znake Character symbols
83.080.01 Polimerni materiali na Plastics in general
splošno
SIST EN ISO 1043-4:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 1043-4:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 1043-4:2021
EN ISO 1043-4
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2021
EUROPÄISCHE NORM
ICS 83.040.30; 83.080.01 Supersedes EN ISO 1043-4:1999, EN ISO 1043-
4:1999/A1:2016
English Version
Plastics - Symbols and abbreviated terms - Part 4: Flame
retardants (ISO 1043-4:2021)
Plastiques - Symboles et termes abrégés - Partie 4: Kunststoffe - Kennbuchstaben und Kurzzeichen - Teil
Ignifuges (ISO 1043-4:2021) 4: Flammschutzmittel (ISO 1043-4:2021)
This European Standard was approved by CEN on 24 July 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1043-4:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 1043-4:2021
EN ISO 1043-4:2021 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 1043-4:2021
EN ISO 1043-4:2021 (E)
European foreword
This document (EN ISO 1043-4:2021) has been prepared by Technical Committee ISO/TC 61 "Plastics"
in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by
NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2022, and conflicting national standards
shall be withdrawn at the latest by February 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1043-4:1999, EN ISO 1043-4:1999/A1:2016.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN websites.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 1043-4:2021 has been approved by CEN as EN ISO 1043-4:2021 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 1043-4:2021
---------------------- Page: 6 -----------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.