iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1118:1998

(Main)

Heat exchangers - Refrigerant cooled liquid coolers - Test procedures for establishing the performance

Heat exchangers - Refrigerant cooled liquid coolers - Test procedures for establishing the performance

This European Standard applies to series produced liquid coolers which operate with a (primary) refrigerant and its purpose is to establish uniform methods to test and ascertain the following: - Product identification - Capacity-Liquid flow rate-Liquid side pressure drop. This Standard does not cover technical safety aspects.

Wärmeaustauscher - Kältemittelgekühlte Flüssigkeitskühler - Prüfverfahren zur Leistungsfeststellung

Diese Europäische Norm gilt für serienmäßig produzierte Flüssigkeitskühler, die mit einem Kältemittel arbeiten. Der Zweck ist, einheitliche Verfahren festzulegen, um folgende Punkte zu prüfen und sicherzustellen: - Produktidentifizierung; - Leistung; - Flüssigkeitsmassenstrom; - Druckabfall auf der Flüssigkeitsseite. Sicherheitstechnische Gesichtspunkte sind nicht Gegenstand dieser Europäischen Norm.

Echangeurs thermiques - Refroidisseurs de liquides - Procédures d'essai pour la détermination de la performance

La présente norme européenne s'applique aux refroidisseurs de liquides fabriqués en série qui fonctionnent avec un fluide frigorigène ; elle vise à définir des méthodes d'essai uniformes.  Les essais et les vérifications portent sur les points suivants :  - identification du produit ;  - puissance thermique ;  - débit du liquide ;  - perte d'énergie mécanique côté liquide.  La présente norme européenne ne couvre pas les aspects techniques concernant la sécurité.

Prenosniki toplote – Hladilniki tekočin, hlajeni s hladivom – Postopki preskušanja za ugotavljanje tehničnih karakteristik

General Information

Status
Published
Publication Date
15-Dec-1998
ICS
27.060.30 - Boilers and heat exchangers
27.200 - Refrigerating technology
Technical Committee
CEN/TC 110 - Heat exchangers
Drafting Committee
CEN/TC 110/WG 1 - Heat exchangers used in the field of refrigeration and air conditioning
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
12-Oct-2023
Ref Project
SIST EN 1118:1999 - Heat exchangers - Refrigerant cooled liquid coolers - Test procedures for establishing the performance

Relations

Amended By
EN 1118:1998/A1:2002 - Heat exchangers - Refrigerant cooled liquid coolers - Test pocedure for establishing the performance
Effective Date
22-Dec-2008

Buy Standard

EN 1118:1999EN 1118:1999
PreviousNext
Standard
EN 1118:1999
English language
43 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Wärmeaustauscher - Kältemittelgekühlte Flüssigkeitskühler - Prüfverfahren zur LeistungsfeststellungEchangeurs thermiques - Refroidisseurs de liquides - Procédures d'essai pour la détermination de la performanceHeat exchangers - Refrigerant cooled liquid coolers - Test procedures for establishing the performance27.200Hladilna tehnologijaRefrigerating technology27.060.30Grelniki vode in prenosniki toploteBoilers and heat exchangersICS:Ta slovenski standard je istoveten z:EN 1118:1998SIST EN 1118:1999en01-december-1999SIST EN 1118:1999SLOVENSKI
STANDARD
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1048:2014(Main)
Heat exchangers - Air cooled liquid coolers ('dry coolers') - Test procedures for establishing the performance
SIST EN 1048:2014

This European Standard applies to remote forced convection air cooled liquid coolers, within which no change in the liquid phase occurs.
This European Standard does not apply to liquid coolers, designed primarily for installation within the machinery compartment of packaged products.
Its purpose is to establish uniform methods to test and ascertain the following:
-   Product identification;
-   Capacity;
-   Air flow rate;
-   Liquid side pressure drop;
-   Energy requirements.
This European Standard does not cover technical safety aspects.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14705:2005(Main)
Heat exchangers - Method of measurement and evaluation of thermal performances of wet cooling towers
SIST EN 14705:2005

This European Standard specifies requirements, test methods and acceptance tests for thermal performances pumping head verification of wet cooling towers and plume abatement for wet/dry cooling towers.
This European Standard is applicable to natural draught wet cooling towers (see in 3.1.2.2) fan assisted natural draught cooling tower (see 3.1.2.3), wet/dry cooling towers (see 3.1.2.4) and "Mechanical draught cooling towers", except series ones.
It specifies the test methods, the apparatus required, the limitation of errors and the method for results examination.
The acceptance testing covers the verification of the thermal performance data and pumping head of the cooling tower as specified in the contract between the supplier and the purchaser. If these tests are required then this should be recognized at the time of the contract, as additional fittings, and preparations for the test may be required.
Deviations from the rules laid down below as well as additions need special agreement between purchaser and supplier and should be documented.
This standard does not apply to mechanical draught series wet cooling towers which are dealt with in prEN 13741.
NOTE   Terms like "design", "values", "guarantee" and "acceptance" used in this standard should be understood in a technical but not in a legal or commercial sense.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1117:1998/A1:2002(Amendment)
Heat exchangers - Liquid cooled refrigerant condensors - Test procedures for establishing the performance
SIST EN 1117:1999/A1:2004

UAP of 4 months (TC Res 146c/1998) (CC/001115)
2020-01-20: Originator of XML version: NEN (on behalf of NEN, ASI, DS, SFS, SIS, SN)

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1118:1998/A1:2002(Amendment)
Heat exchangers - Refrigerant cooled liquid coolers - Test pocedure for establishing the performance
SIST EN 1118:1999/A1:2004

UAP of 4 months (TC Res 146d/1998) (CC/001115)
2020-01-20: Originator of XML version: NEN (on behalf of NEN, ASI, DS, SFS, SIS, SN)

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1117:1998(Main)
Heat exchangers - Liquid cooled refrigerant condensers - Test procedures for establishing the performance
SIST EN 1117:1999

This European Standard applies to series produced liquid cooled refrigerant condensers which operate with a (primary) refrigerant. Its purpose is to establish uniform methods to test and ascertain the following:- Product identification,Capacity,Liquid flow rate,Liquid side pressure drop. This Standard does not cover technical safety aspects.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1048:2014(Main)
Heat exchangers - Air cooled liquid coolers ('dry coolers') - Test procedures for establishing the performance
SIST EN 1048:2014

This European Standard applies to remote forced convection air cooled liquid coolers, within which no change in the liquid phase occurs.
This European Standard does not apply to liquid coolers, designed primarily for installation within the machinery compartment of packaged products.
Its purpose is to establish uniform methods to test and ascertain the following:
-   Product identification;
-   Capacity;
-   Air flow rate;
-   Liquid side pressure drop;
-   Energy requirements.
This European Standard does not cover technical safety aspects.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14705:2005(Main)
Heat exchangers - Method of measurement and evaluation of thermal performances of wet cooling towers
SIST EN 14705:2005

This European Standard specifies requirements, test methods and acceptance tests for thermal performances pumping head verification of wet cooling towers and plume abatement for wet/dry cooling towers.
This European Standard is applicable to natural draught wet cooling towers (see in 3.1.2.2) fan assisted natural draught cooling tower (see 3.1.2.3), wet/dry cooling towers (see 3.1.2.4) and "Mechanical draught cooling towers", except series ones.
It specifies the test methods, the apparatus required, the limitation of errors and the method for results examination.
The acceptance testing covers the verification of the thermal performance data and pumping head of the cooling tower as specified in the contract between the supplier and the purchaser. If these tests are required then this should be recognized at the time of the contract, as additional fittings, and preparations for the test may be required.
Deviations from the rules laid down below as well as additions need special agreement between purchaser and supplier and should be documented.
This standard does not apply to mechanical draught series wet cooling towers which are dealt with in prEN 13741.
NOTE   Terms like "design", "values", "guarantee" and "acceptance" used in this standard should be understood in a technical but not in a legal or commercial sense.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1117:1998/A1:2002(Amendment)
Heat exchangers - Liquid cooled refrigerant condensors - Test procedures for establishing the performance
SIST EN 1117:1999/A1:2004

UAP of 4 months (TC Res 146c/1998) (CC/001115)
2020-01-20: Originator of XML version: NEN (on behalf of NEN, ASI, DS, SFS, SIS, SN)

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1118:1998/A1:2002(Amendment)
Heat exchangers - Refrigerant cooled liquid coolers - Test pocedure for establishing the performance
SIST EN 1118:1999/A1:2004

UAP of 4 months (TC Res 146d/1998) (CC/001115)
2020-01-20: Originator of XML version: NEN (on behalf of NEN, ASI, DS, SFS, SIS, SN)

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1117:1998(Main)
Heat exchangers - Liquid cooled refrigerant condensers - Test procedures for establishing the performance
SIST EN 1117:1999

This European Standard applies to series produced liquid cooled refrigerant condensers which operate with a (primary) refrigerant. Its purpose is to establish uniform methods to test and ascertain the following:- Product identification,Capacity,Liquid flow rate,Liquid side pressure drop. This Standard does not cover technical safety aspects.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day