CEN ISO/TS 24817:2011
(Main)Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO/TS 24817:2006)
Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO/TS 24817:2006)
ISO/TS 24817:2006 gives requirements and recommendations for the qualification and design, installation, testing and inspection for the external application of composite repairs to corroded or damaged pipework used in the petroleum, petrochemical and natural gas industries.
Erdöl-, petrochemische und Erdgasindustrie - Reparatur von Rohrleitungen mit Verbundwerkstoffen - Bewertung und Ausführung, Montage, Test und Inspektion (ISO/TS 24817:2006)
Industries du pétrole, de la pétrochimie et du gaz naturel - Réparations en matériau composite pour canalisations - Conformité aux exigences de performance et conception, installation, essai et inspection (ISO/TS 24817:2006)
Petrokemična industrija ter industrija za predelavo nafte in zemeljskega plina - Popravila cevovodov s kompozitnimi materiali - Ocenitev in načrtovanje, montaža, preskus in nadzor (ISO/TS 24817:2006)
Ta tehnična specifikacija podaja zahteve in priporočila za ocenitev in načrtovanje, montažo, preskus in nadzor zunanje uporabe popravil s kompozitnimi materiali korodiranih in poškodovanih cevovodov, ki se uporabljajo v petrokemični industriji ter industriji za predelavo nafte in zemeljskega plina.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2012
3HWURNHPLþQDLQGXVWULMDWHULQGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD
3RSUDYLODFHYRYRGRYVNRPSR]LWQLPLPDWHULDOL2FHQLWHYLQQDþUWRYDQMHPRQWDåD
SUHVNXVLQQDG]RU ,6276
Petroleum, petrochemical and natural gas industries - Composite repairs for pipework -
Qualification and design, installation, testing and inspection (ISO/TS 24817:2006)
Erdöl-, petrochemische und Erdgasindustrie - Reparatur von Rohrleitungen mit
Verbundwerkstoffe - Bewertung und Ausführung, Montage, Test und Inspektion (ISO/TS
24817:2006)
Industries du pétrole, de la pétrochimie et du gaz naturel - Réparations en matériau
composite pour canalisations - Conformité aux exigences de performance et conception,
installation, essai et inspection (ISO/TS 24817:2006)
Ta slovenski standard je istoveten z: CEN ISO/TS 24817:2011
ICS:
75.180.20 Predelovalna oprema Processing equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
TECHNICAL SPECIFICATION
CEN ISO/TS 24817
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
February 2011
ICS 75.180.20
English Version
Petroleum, petrochemical and natural gas industries -
Composite repairs for pipework - Qualification and design,
installation, testing and inspection (ISO/TS 24817:2006)
Industries du pétrole, de la pétrochimie et du gaz naturel - Erdöl-, petrochemische und Erdgasindustrie - Reparatur
Réparations en matériau composite pour canalisations - von Rohrleitungen mit Verbundwerkstoffen - Bewertung und
Conformité aux exigences de performance et conception, Ausführung, Montage, Test und Inspektion (ISO/TS
installation, essai et inspection (ISO/TS 24817:2006) 24817:2006)
This Technical Specification (CEN/TS) was approved by CEN on 27 December 2010 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 24817:2011: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
The text of ISO/TS 24817:2006 has been prepared by Technical Committee ISO/TC 67 “Materials, equipment
and offshore structures for petroleum, petrochemical and natural gas industries” of the International
Organization for Standardization (ISO) and has been taken over as CEN ISO/TS 24817:2011 by Technical
Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries” the secretariat of which is held by AFNOR.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO/TS 24817:2006 has been approved by CEN as a CEN ISO/TS 24817:2011 without any
modification.
TECHNICAL ISO/TS
SPECIFICATION 24817
First edition
2006-12-15
Petroleum, petrochemical and natural gas
industries — Composite repairs for
pipework — Qualification and design,
installation, testing and inspection
Industries du pétrole, de la pétrochimie et du gaz naturel — Réparations
en matériau composite pour canalisations — Conformité aux exigences
de performance et conception, installation, essai et inspection
Reference number
ISO/TS 24817:2006(E)
©
ISO 2006
ISO/TS 24817:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
ISO/TS 24817:2006(E)
Contents Page
Foreword. v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 2
4 Symbols and abbreviated terms . 5
4.1 Symbols . 5
4.2 Abbreviated terms . 8
5 Applications . 8
6 Qualification and design . 10
6.1 Risk assessment. 10
6.2 Repair class. 11
6.3 Repair lifetime . 11
6.4 Required data . 11
6.5 Design methodology . 14
6.6 Requalification . 35
7 Installation . 35
7.1 General. 35
7.2 Materials of construction . 36
7.3 Storage conditions . 36
7.4 Method statements . 36
7.5 Installer qualifications. 37
7.6 Installation guidance . 37
7.7 Live repairs. 38
7.8 Repair of clamps, piping components, tanks or vessels . 38
7.9 Environmental considerations . 38
8 Testing and inspection. 39
8.1 General. 39
8.2 Allowable defects for the repair system. 39
8.3 Repair of defects within the repair system .41
8.4 Inspection methods. 41
8.5 Repair system maintenance and replacement strategy . 41
9 System testing . 42
10 Future modifications . 42
11 Decommissioning. 42
Annex A (normative) Design data sheet . 43
Annex B (normative) Qualification data. 46
Annex C (normative) Short-term pipe spool survival test . 48
Annex D (normative) Measurement of γ for through-wall defect calculation . 50
LCL
Annex E (normative) Measurement of performance test data. 53
Annex F (normative) Measurement of impact performance . 56
Annex G (normative) Measurement of the degradation factor. 57
ISO/TS 24817:2006(E)
Annex H (informative) Axial extent of repair look-up table . 59
Annex I (normative) Installer qualification. 61
Annex J (normative) Installation requirements and guidance. 64
Bibliography . 67
iv © ISO 2006 – All rights reserved
ISO/TS 24817:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical com
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.