Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 7: Powder feed systems

This European Standard specifies requirements for the acceptance inspection of thermal spraying equipment in the case of powder feed units used in spray jobs to produce thermally sprayed coatings of reproducible quality.
This part should be used in conjunction with EN 1395-1, which includes general requirements and explanations of procedures.
This part should be used in addition to EN 1395-2 when carrying out acceptance inspection for flame and/or HVOF (high velocity oxygen-fuel) spraying equipment, or EN 1395-4 when carrying out acceptance inspection for plasma spraying equipment.

Thermisches Spritzen - Abnahmeprüfungen für Anlagen zum thermischen Spritzen - Teil 7: Pulverfördersysteme

Diese Europäische Norm definiert Anforderungen für die Abnahmeprüfung von thermischen Spritzanlagen, in
diesem Fall Pulverfördersysteme, wie sie bei Spritzarbeiten zur Herstellung von thermisch gespritzten Schichten
mit reproduzierbarer Qualität verwendet werden.

Projection thermique - Contrôle d'acceptation du matériel de projection thermique - Partie 7: Systèmes d'alimentation en poudre

La présente Norme européenne spécifie les exigences du contrôle d’acceptation des matériels de projection thermique, et dans le cas présent, des systèmes de d’alimentation en poudre utilisés dans les travaux de projection pour obtenir des revêtements de projection thermique de qualité reproductible.
Il convient d’utiliser cette partie en liaison avec l’EN 1395-1 qui traite des exigences générales et de l’explication des modes opératoires.
Il est recommandé d’utiliser la présente partie en liaison avec l’EN 1395-2 lorsque le contrôle d’acceptation concerne un matériel de projection à la flamme, y compris à grande vitesse, ou avec l’EN 1395-4 lorsque le contrôle d’acceptation concerne un matériel de projection au plasma.

Vroče brizganje – Prevzemni preskusi opreme za vroče brizganje – 7. del: Sistem za dovajanje prahu

General Information

Status
Published
Publication Date
30-Jan-2007
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
02-Sep-2023
Completion Date
02-Sep-2023

Relations

Buy Standard

Standard
EN 1395-7:2007
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 7: Powder feed systemsProjection thermique - Contrôle d'acceptation du matériel de projection thermique - Partie 7: Systemes d'alimentation de poudreThermisches Spritzen - Abnahmeprüfungen für Anlagen zum thermischen Spritzen - Teil 7: PulverfördersystemeTa slovenski standard je istoveten z:EN 1395-7:2007SIST EN 1395-7:2007en25.220.20Površinska obdelavaSurface treatmentICS:SIST EN 1395:19991DGRPHãþDSLOVENSKI
STANDARDSIST EN 1395-7:200701-april-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1395-7January 2007ICS 25.220.20Supersedes EN 1395:1996
English VersionThermal spraying - Acceptance inspection of thermal sprayingequipment - Part 7: Powder feed systemsProjection thermique - Contrôle d'acceptation du matérielde projection thermique - Partie 7: Systèmes d'alimentationde poudreThermisches Spritzen - Abnahmeprüfungen für Anlagenzum thermischen Spritzen - Teil 7: PulverfördersystemeThis European Standard was approved by CEN on 23 December 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1395-7:2007: E

Inspection report for a powder feed unit (initial test/retest).6 A.1 Function test.6 A.2 Set value on the spraying equipment when testing the powder feed unit:.6 A.3 Mass flow inspection test.6 A.4 Powder de-mixing test – Particle size distribution.7 A.5 Measuring equipment capability.7 Bibliography.8

This document together with EN 1395-1, 1395-2, 1395-3, 1395-4, 1395-5 and 1395-6 supersedes EN 1395:1996. EN 1395 consists of the following Parts, under the general title Thermal spraying — Acceptance inspection of thermal spraying equipment:  Part 1: General requirements;  Part 2: Flame spraying including HVOF;  Part 3: Arc spraying;  Part 4: Plasma spraying;  Part 5: Plasma spraying in chambers;  Part 6: Manipulator systems;  Part 7: Powder feed systems. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.