EN 13763-2:2002

Explosives for civil uses - Detonators and relays - Part 2: Determination of thermal stability

This EN describes a method for determining the thermal stability of electric detonators, non-electric detonators and relays.

Explosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 2: Bestimmung der thermischen Stabilität

Diese Europäische Norm beschreibt ein Verfahren zur Bestimmung der thermischen Stabilität von elektrischen Zündern, nichtelektrischen Zündern und Verzögern.

Explosifs à usage civil - Détonateurs et relais - Partie 2: Détermination de la stabilité thermique

La présente Norme européenne spécifie une méthode de détermination de la stabilité thermique des détonateurs électriques, des détonateurs non-électriques, des connecteurs de surface, des relais pour cordeau détonant ainsi que des tubes à transmission d'ondes de choc utilisés avec des détonateurs non-électriques.

Eksplozivi za civilno uporabo - Detonatorji in zakasnilniki - 2. del: Ugotavljanje toplotne stabilnosti

General Information

• Status: Published
• Publication Date: 24-Sep-2002
• Withdrawal Date: 30-Mar-2003
• ICS: 71.100.30 - Explosives. Pyrotechnics and fireworks
• Technical Committee: CEN/TC 321 - Explosives for civil uses
• Drafting Committee: CEN/TC 321/WG 4 - Detonators and relays
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 20-Jan-2018
• Directive: 2014/28/EU - Directive 2014/28/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market and supervision of explosives for civil uses
• Directive: 93/15/EEC - Council Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses
• Mandate: M/055 - Standardization mandate to CEN for explosives for civil uses
• Ref Project: SIST EN 13763-2:2002 - Explosives for civil uses - Detonators and relays - Part 2: Determination of thermal stability

Relations

• Revised: FprEN 13763-2 - Explosives for civil uses - Detonators and detonating cord relays - Part 2: Verification of thermal stability of detonators, surface connectors, detonating cord relays and shock tubes
• Effective Date: 24-Mar-2020

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Eksplozivi za civilno uporabo - Detonatorji in zakasnilniki - 2. del: Ugotavljanje toplotne stabilnostiExplosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 2: Bestimmung der thermischen StabilitätExplosifs a usage civil - Détonateurs et relais - Partie 2: Détermination de la stabilité thermiqueExplosives for civil uses - Detonators and relays - Part 2: Determination of thermal stability71.100.30Eksplozivi. PirotehnikaExplosives. PyrotechnicsICS:Ta slovenski standard je istoveten z:EN 13763-2:2002SIST EN 13763-2:2002en01-december-2002SIST EN 13763-2:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13763-2September 2002ICS 71.100.30English versionExplosives for civil uses - Detonators and relays - Part 2:Determination of thermal stabilityExplosifs à usage civil - Détonateurs et relais - Partie 2:Détermination de la stabilité thermiqueExplosivstoffe für zivile Zwecke - Zünder undVerzögerungselemente - Teil 2: Bestimmung derthermischen StabilitätThis European Standard was approved by CEN on 1 August 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13763-2:2002 E

Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.7
...